Used Everun Er 12 for sale (154,500)

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, overall weight: 15,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, total width: 2,400 mm, total height: 3,170 mm, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC III Turntable Ladder in operational condition! ----First registration: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 h Base vehicle features: * Leaf spring suspension on rear axle * Wheelbase: 4,250 mm * Permissible gross weight: 15 t * 7-speed manual transmission * 127 l fuel tank located under rear platform * Differential lock on rear axle * Reinforced rear leaf springs and shock absorbers * Reinforced front torsion bar, stabilizer, and shock absorbers * Dual passenger seat bench * Exhaust pipe for fire service exiting before front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for passenger seats * Rear wall of cab with 2 windows * Electric window lift right side * Heated, electrically adjustable exterior mirrors with wide-angle section * Ramp mirror right side * Blue rotating beacon and Martin horn * Front blue flashers Turntable ladder superstructure features: * Metz turntable ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75 m). Max. elevation angle: 75 degrees, max. basket load: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, stabilizers: horizontal/vertical, adjustable stabilizer width between 2,400 mm and 4,500 mm * Folding rescue basket for 3 persons * 2 x 24V LED spotlights at front of rescue basket * Lifting lug at tip of lower ladder section from reinforced ladder set for lifting, lowering, and swiveling loads * Mount for portable 5 kVA generator at rotating platform * 2 x 24V/70W halogen spotlights at head of lower ladder section, teleflex-controlled from main operator station * 400V power supply protected in ladder set to tip of upper ladder incl. socket and power feed with plug for generator at rotating platform * Derivation cable from head of upper ladder to rescue basket with 1 x 400V and 2 x 230V sockets in basket * Fixed water conduit in lower ladder section * Detachable nozzle in rescue basket * Storage holder for nozzle * METZ stretcher mount SLK 111 incl. holder on platform * Compartment for stretcher storage in platform * Martin horn with 4 trumpets instead of BOSCH loud horns * Permanently installed charger 230V / 24V * Service manual available, all maintenance performed annually ----Immediately ready-to-use vehicle from first owner in well-maintained condition! New safety inspection (SP) New general inspection (HU) Non-smoking vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Isdoxa Sbwepfx Afieih Subject to changes, prior sale and errors!

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Iodpjmv Hz Isfx Afieih Year of manufacture: 2002 Weight: 350 kg Working length: 3300mm Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: used, mileage: 23,089 km, power: 177 kW (240.65 HP), first registration: 12/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, +++ Extremely clean vehicle with only 23,089 original km +++ without rear-built-in pump (was defective) Ideal base for an expedition vehicle. 1,200 l water tank is leak-free, baffle plates are defective, mechanical light mast Pneumatically extendable side steps left + right All-wheel drive 4x4 with 2x differential locks – center and rear, ABS Wheelbase 3,640 mm Maximum speed according to documents 95 km/h, GPS = 97 km/h Ijdpfexnukwsx Afijih Freshly serviced including greasing, new fuel filter, and new air dryer cartridge +++ Subject to errors, changes, and prior sale

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, functionality: fully functional, turning diameter over cross slide: 560 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, For sale: CNC lathe, brand Weiler, model DZ 65. The machine is equipped with 12 driven tool stations and is in excellent condition with low operating hours. Package including accessories available for a total price of €65,000. Technical data: Year of manufacture: 2014 Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Height of spindle center above floor: 1130 mm X travel: 207.5 mm Face length tip: 745 mm Z travel: 530 mm Turning diameter: 560 mm Rated power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Bar capacity in draw tube: 65 mm Tailstock NC controlled Center taper: MK 4 Power: 4 MK Torque: 9.5 Nm Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tool positions: 12 Tool shank cross-section: 20 x 20 mm Tool holder: VDI 30 Dimensions: 3180 mm x 2050 mm x 2200 mm Weight: 6300 kg Additional information: - Bar feeder hardware is pre-installed but requires activation - Supplied with chip tray only, chip conveyor available from Weiler - Equipped with oil skimmer - Offer does not include tool holders and collets, but these can be included upon request Transport and loading can be arranged at extra cost, Europe-wide. Prices are plus VAT. Inspection possible by appointment. Please contact us – our team is happy to support you. Trade-ins or exchanges possible! Machinery purchase/sale Iijdpfx Afjuxc Tceieh BUY/SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: K35.0120.2201.01, TE 120, 12 pozi, CNC turret head K35.0120.2201.01, TE 120, 12 positions. Complete set of holders and drawings for holder production. Condition as shown in photos. Functional – removed from a machine that was in production until the last moment. On-site inspection possible. Year of manufacture 2017 – 4 years in storage. Iodpsxndmzsfx Afioih

Condition: good (used), Approx. 30 segment circular saw blades up to approx. 1000 mm, bore 100 mm, primarily for LKH 310 and for PMC 12. Iedexlg Nmopfx Afisih

Condition: excellent (used), Year of construction: 2016, Kaeser Aircenter SM 12 Screw Compressor Manufacturer: Kaeser Model: Aircenter Condition: Used, very good Operating hours: 4,300 h Load hours: 1,300 h Maintenance (oil + all filters) will be renewed before handover. Technical Data Pressure: 11 bar Effective delivery rate: 1.08 m³/min Drive motor rated power: 7.5 kW Drive motor protection class: IP 54 Power supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air tank: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer: Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure loss: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Iedpfoxlad Rjx Afieih Electrical equipment EN 60204-1: Yes Scope of delivery: – Documentation – RFID card – 5m power cable with 32A plug

Condition: good (used), machine/vehicle number: 3500, Year of construction: 2019, load capacity: 32,000 kg, lifting height: 3,510 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,440 mm, total length: 7,000 mm, total width: 3,330 mm, operation weight: 45,390 kg, additional equipment features: Weight system, Warning triangle, Centralized greasing system, Dual tread, NATO-socket, Front mud guards, Equipment: lighting, Hyster H32.00XM-12 from Uniktruck Ijdjxbtu Uepfx Afieih

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Iisdpow Si T Aofx Afish Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer Kaeser Model SM 12 Year of manufacture 2016 Power 7.5 kW Operating pressure 8 bar Refrigeration dryer: Manufacturer Kaeser Model ABT 12 Year of manufacture 2016 Refrigerant R-134a Tank: Manufacturer BWB Behälter-Werk Year of manufacture 2016 Max. operating pressure 11 bar Capacity 270 liters After oil and filter inspection (replacement) Technical condition: perfect! Iedpewx I Ruefx Afieih

Condition: ready for operation (used), Baumüller GNAF 112-LV direct current shunt motor without encoder, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo. The agreed sales discounts do not apply to this item. Please request the price separately. ATTENTION: Please enquire separately about costs for packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Ijdpfx Aswn R A Ejfieih

Condition: used, TECHNICAL DETAILS Iiedpfx Afjuy Uyweieh - Max. bar diameter : 12,7 [mm] - X stroke : 85 [mm] - Y stroke : 150 [mm] - Z stroke : 160 [mm] - Spindle speeds : 12000 [rpm] - Number of axes : 5 EQUIPMENT - CNC : Fanuc 18 i-T - Bar loader : IEMCA CH 220 Type 32 L - Oil mist extractor : LTA Basic line 01

Condition: used, Parts for PMC 12 - or - for LKH 310 - Clamping elements - Saw blade guiding elements Isdpfxoxf H Ucs Afisih

Condition: good (used), machine/vehicle number: 3315, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,400 mm, total width: 2,550 mm, operation weight: 23,610 kg, additional equipment features: Weight system, Warning triangle, Dual tread, Engine heater, Front mud guards, Hydraulic sliding cabin, Rear mud guards, Equipment: lighting, Hyster H16.00XM-12 from Uniktruck Ijdpfsv Hhagex Afijih

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Iisdpfx Afexf Ak Tsish Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm Iijdpfsvprxfsx Afieh fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: used, Höcker Polytechnik Multistar VQ 12/6 extraction system consisting of: * Multistar VQ 12/6 filter system * 4 extraction fans * Hacker rsn type SL300/24/S * Spark extinguishing system (out of service) Available from September 2025. Iedpfx Ajwrxi Isfisih

Condition: used, Year of construction: 2006, The SL 12 P, manufactured by Perfecta in 2006, is currently in stock and located in Germany. This machine has a format of 1,050 x 1,450 mm and features angular boards, a side gauge, and a back panel that allow for manual restacking of the completed material after cutting. It has a maximum carrying capacity of 1,200 kg and a platform size of 1,050 x 1,450 mm. The maximum stroke is 890 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 1.050 x 1.450 mm Equipment: Angular boards - Side gauge and back panel allow to manually restack the completed material after cu Ijdpfx Aovfx Aiofisih Carrying capacity max: 1.200 kg Platform size: 1.050 x 1.450 mm Stroke max: 890 mm

Condition: used, Year of construction: 2013, Empty weight: 300 kg Part suitable for: trucks Type number: A0012603600, A9602610801, A96026 G211-12 Occ versnellingsbak G211-12 Mercedes Actros MP4 Ijdsximzwepfx Afioih A0012603600 A9602610801 A9602610901 OEM : A0012603600, A9602610801, A9602610901, g211-12 Article nr.: N113004164-veiling Used gearbox G211-12 Mercedes Actros MP4

Condition: used, Year of construction: 1997, Perfecta SHL 12 P pile lift is a machine manufactured by Perfecta in 1997, with a format of 800 x 600 mm. Currently stored in Germany, it has a maximum load capacity of 1000 kg and a maximum dimension of 800 x 600 mm. The delivery terms are FCA. Format: 800 x 600 mm Equipment: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm Iodpfx Asvfxr Refieih

Condition: used, Year of construction: 2016, Empty weight: 300 kg Part suitable for: trucks Type number: 715352, A0012603600, G211-12 G211-12 Occ versnellingsbak G211-12 Mercedes 438.512km OEM : 715352, A0012603600, G211-12 Ijdpfx Afsximwfoieih Article nr.: N113004231-veiling Used gearbox G211-12 Mercedes

Condition: used, Empty weight: 10 kg Part suitable for: trucks Type number: A9612604463, A9602609263 Isdpfsximmgox Afisih G211-12 Occ transmissieschakelcilinder G211-12 Mercedes OEM : A9612604463, A9602609263 Article nr.: N112004042-veiling Used transmission shift cylinder G211-12 Mercedes

Condition: used, New: Yes Empty weight: 20 kg Part suitable for: trucks 12v120ah 513 x 189 x 223 mm Article nr.: POWERBAT 120-veiling Iedpfx Aexifgfofieih Battery 12 v 120 ah 720 a

Condition: used, Empty weight: 450 kg Part suitable for: trucks Type number: G211-12 G211-12 OEM : G211-12 Article nr.: N113004126-veiling Iijdpfxsxicmis Afish Used Gearbox Mercedes G211-12

Condition: used, Year of construction: 2016, Empty weight: 300 kg Part suitable for: trucks Type number: 715352, A0012603600 G211-12 Iodpexiccqsfx Afijih Occ versnellingsbak G211-12 Mercedes OEM : 715352, A0012603600 Article nr.: N113004232-veiling Used gearbox G211-12 Mercedes