Used Erector for sale (75)

Condition: new, functionality: fully functional, Year of construction: 2021, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, working height: 650 mm, machine/vehicle number: SM20215245, Equipment: documentation/manual, Neat Lantech C-1000, right-handed version Rcodjt Dn Hqspfx Ahcof

Condition: used, Nordson Heißleim Gerät 3400 V 2002 capacity / hour ca.: 1500 Rcsdpfjxytqyex Ahcjf Strom / Volt: 380

Condition: used, Year of construction: 2020, Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  - Output: 2,000 bottles/hour - Different bottle shapes possible as the height and width can be adjusted Redpewqpkaofx Ahcecf - Bottle volumes from 0,5l to 3,0l are possible - Last used for: Spirits, can also be used for other liquids Scope of delivery  - Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) - Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) - Borelli Capper for T-cork - Conveyor belts - Lantech C-300 carton erector (2021)

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Rjdpfx Asy Icp Dehcscf

Condition: used, Year of construction: 2004, Carton erection and packaging system Description: The machine is used to repack 0.5 l bottles from modular crates into carrier boxes of 4. It is connected to the palletizing system and packer via conveyor belts and consists of the bottle carrier erector and the unpacker/packer. Bottle carrier erector: Here, pre-glued cardboard cuts are manually inserted into the magazines by the operating personnel, from there they are automatically removed, erected and transported to the bottle carrier inserter in two lines using a belt conveyor. Unpacker and packer: Here the full modular crates are unpacked individually. The bottles run along a short conveyor belt to the packer/bottle carrier inserter, who packs them into the erected boxes. The filled boxes are then transported to the crate packer. Additional title: Box unpacker for module crates with a box erector and box packer Capacity: 200 crates/h Rsdpjztybxofx Ahcocf Formats: bottle crate (400 x 300 mm) Operation / Control: Control cabinet with control panel Position: free standing Base construction: Aluminum profile frame with viewing windows, screwed to the floor on base plates Features: Bottle carrier box magazine, bottle carrier erector, unpacker, packer, conveyor belts, control cabinet Layer patterns: 2x2 bottles/carton

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz Rjdpfxeya Dh Dj Ahcjcf 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Rcodpek Nm Nrsfx Ahcof

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Rsdpsm Nckfefx Ahcjcf

Condition: ready for operation (used), Year of construction: 2016, A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025. Rodpewn H U Djfx Ahcecf

Condition: ready for operation (used), Year of construction: 2025, An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible. Rcedpfxoy Hk Tne Ahcof

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Rcedpfx Ahezrpwtocef Technical data - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air demand: 7.08 m³/h, year of last overhaul: 2025, air pressure: 87 bar, film width: 360 mm, product height (max.): 430 mm, product height (min.): 110 mm, product length (max.): 600 mm, product length (min.): 300 mm, The SAVOYE INTELIS packing machine is a fully automatic packaging line designed for packing products in corrugated cardboard boxes. The unit was manufactured in France in 2016 and features a modular plug & play architecture, enabling quick assembly, disassembly and adaptation of the process to current logistics requirements. This machine is suitable for medium to large distribution centers, e-commerce operations, contract logistics providers, and manufacturing plants. Its capacity is up to 840 cartons/hour, with a maximum single package weight of up to 32 kg. The packaging line consists of the following components (as per documentation): Redpfox Uphgox Ahcecf INTELIS F12 – Carton erector – automatic forming of boxes from corrugated board. INTELIS T18 – Shrink tunnel – carton and film stabilization through thermal shrinkage. INTELIS C12 – Carton closer – lid application and final closing of the carton. NORDSON PROBLUE – Glue application system – professional glue applicator for packaging. Key features: - Fully automated packing cycle. - Forming, shrinking, closing, and preparing parcels for shipment. - Stable and energy-efficient transport system – conveyors with integrated roller drives. - Intelligent speed and load adjustment. - ECO mode with regenerative braking energy recovery. Technical specifications: PLC: TSXP572634M Throughput: 840 cartons/hour Carton dimensions: • min. 300 × 200 × 110 mm • max. 600 × 400 × 430 mm Max. package weight: 32 kg Power: 5 kVA Power supply: 3-phase 400 V

Condition: new, Carton erector Igluetech/Brunel Engineering Services RSE 4 units Rcsdpfx Ahsvu Sriocof Price per unit

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Rsdpfxszlqu Tj Ahcscf Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Rcodpfx Ajy Szcwshcef

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Rcjdpfx Ahsy Szb Hjcsf

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Rcedjy Hi U Depfx Ahcof Technical data - Manufacturer: SMI - Model: TF 300 - Machine type: Tray forming machine (tray erector / tray packer) - Year of manufacture: 2002 - Capacity: approx. 23 packs per minute - Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment - Automatic tray forming system - Suitable for beverage multipack tray applications - Integration capability into existing packaging lines

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Rjdpfx Ahoyb Tucocecf Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, Year of construction: 2016, Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). Rcjdpfjyb Snbjx Ahcef The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  - Performance - Product infeed online: max. 280 jars/min - Format 3: max. 220 jars/min - Mix type A: max. 140 jars/min (11.5 cartons/min) - Mix type B: max. 140 jars/min (11.5 cartons/min) - Total output: max. 350 jars/min or 30 cartons/min - Carton erector & lidder: 23.5 cartons/min - Changeover time Format change: approx. 15 minutes - Formats / packaging specifications - Format 1: 12-jar tray, 2 layers, 350 g jars - Format 2: 6-pack tray, 2 layers, 720 g jars - Format 3: 6-pack tray, 2 layers, 580 g jars - Format 4: 6-pack tray, 2 layers, 1,000 g jars - Format 5 (mixed formation): Combination of different jars, automatic mixing via separate belts - Operating hours: approx. 5,000 (of which approx. 2,000 are pure production) - Power supply - Electrical: 3x 400 V / N / PE, 50 Hz - Pneumatic: min. 6 bar – max. 12 bar, oil-free, residual oil content max. 0.1 mg/m³ (ISO 8573-1 Class 2) System components - Buhmann C300 carton erector (wrap-around trays) - Buhmann PF800 packing unit - Yaskawa robot with gripping units - 2x Nordson PROBlue 4 gluing devices - Separate feed belt for offline products (mixed cartons) - Carton sealing unit

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg Rcedpfx Aezbyn Njhcof 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Rsdpozbynpjfx Ahcecf Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2011, Site price: Carton erector, Mohrbach, erector 541 - second-hand - : Price per unit ex site: only 19.950.-€ (net), incl. loading! Manufacturer: Mohrbach Type: Erector 541 Year of construction: 2011 Machine number: 1112030 Rcedpsuxq N Eofx Ahcjf with Nordson ProBlue 4 adhesive melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 2.06m plus c. 1.36m for the magazine Condition: good Available: immediately Location: CZ Bor

Condition: good (used), Year of construction: 2014, For Sale: Brand: Tramper Rcodpfex H Smpsx Ahcsf type: NWL5300 model: Standard container lifter / tipper capacity: 200 Litres pneumatics: Festo dimensions Length x width x height: 1200mm x 1570mm x 5500mm weight: 1000 KG fully stainless steel includes 3 standard containers of 200 Litres each The lifter/tipper can be inspected on site. Transport by arrangement. Price includes loading for transport. If you have any questions or remarks, please do not hesitate to contact. Kind regards, Leo Holland

Condition: used, Used end of line TMG up to 1200 box-hour Case Erector with Hot Glue Sealing Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Rsdpfevgt N Tsx Ahcecf Case Packer with Mechanical Movement Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Rcodpfjzaq Anox Ahcsf Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick