Used End Mill for sale (14,974)

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR Bwedjddtwbepfx Ak Esl - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Bwedpfjwkrq Aox Ak Ejl Enclosed guarding Manual

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Bwodpfx Asx Hkd Hjk Esl Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Bwodpfx Ajum I Sfek Eol Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: excellent (used), Check valve, non-return valve -Type: GS011 -Connection: DN100 -Nominal pressure: PN16 -Total length: 18 mm -Passage: 70 mm -Valve cover material: Stainless steel -Number: 1x valve available -Price: per piece -Weight: 2.5 kg Bsdpfx Aeb A Rxmek Eswl

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide Bjdpfx Ajb A Ihdjk Eowl -Recording: SK50 -Weight: 4.5 kg

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Bedpfxst Ixkzo Ak Eowl Maximum Inlet Wire's Diameter: 30 mm

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm Bodpfx Akswi S Ixe Eewl finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Bwjdpfxjxv Su Ne Ak Eel Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital position display! TECHNICAL DETAILS Bwedpfxjy Emq Te Ak Eel X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT All accessories shown in the photos, including tools, tool cabinets, and clamping devices

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Bwsdpsy Edc Hsfx Ak Eel Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Bwsdpfx Akoy D I Ttj Eol Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, table length: 1,800 mm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Bedpfx Akoy Avvaj Ejwl Travel Y-axis: 540 mm Travel Z-axis: 520 mm Main spindle power: 7.5 kW Spindle speed: 275 - 2,000 rpm Table length: 1,800 mm Table width: 400 mm MACHINE DETAILS Control manufacturer: Heidenhain Number of axes: 3 Tool holder: BT50 Power: 12.0 kW Dimensions & Weight Dimensions (L x W x H): 2100 x 2100 x 2200 mm Weight: 3,600 kg EQUIPMENT Tools

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine Bwsdpoy Edl Ujfx Ak Eel - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Bwjdpfx Aey Edgfsk Esl Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle C-axis Bodpfx Akoy Dqtio Eewl Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Oil mist separator

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 144205, turning length: 2,500 mm, controller model: MAZATROL PC-Fusion CNC 640MT, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 2,500 mm MACHINE DETAILS Control: MAZATROL PC-Fusion CNC 640MT Tool magazine: 30 tool stations EQUIPMENT Bedpfx Asy Dp Acek Ejwl High-pressure coolant system Driven tools Chip conveyor Measuring probe/tool measurement Steadies (lunettes) Note: A minor repair has been carried out on the machine. The repair certificate is attached.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel range X-axis: 5,300 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 2,000 mm Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 – 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 – 10,000 mm/min Rapid traverse: 15 m/min Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatic swivelling milling head, vertical/horizontal 2 x 180° Milling head swivels automatically in the rear axis 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1,500 mm Bsdey Dg I Nepfx Ak Eswl Extended vertical travel (Z-axis) 2,000 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Bwsdpoy A Nf Isfx Ak Eol Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring system Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Bwsdsy Hg S Hopfx Ak Eel Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Bwodpjy E Hqtjfx Ak Ejl Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Bwodpfx Aksy Eydyj Esl Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 2000 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y,Z): 20000 / 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approximate: 14000 kgMachine dimensions approximate: 6367 x 5070 x 2803 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceTool pedal: new foot clamping tool pedalElectronic handwheel: New HR-510Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Bwsdpfxsyf Rrye Ak Ejl

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Bedpfxjyw Uqxo Ak Eowl Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: New Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 /  10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approximate: 23500 kgMachine dimensions approximate: 11100 x 5392 x 3400 mm Accessories Guarding: 2 front doors and a new perimetral wire-mesh ctronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1000 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Feedrates: 5000 mm/minRapid feedrates (X-Y-Z): 20000 mm/min Weight and dimensions Maximum weight on table: 6000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7750 x 4400 x 3100 mm Accessories GuardingNew automatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: HR-410External coolant and high pressure through spindle Bwsdpfsyf Rtwjx Ak Esl Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features