Used End Ball Valve for sale (15,204)

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. The Package Includes: 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Hodpfx Aioz Ahmbjtofn Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Hfodpfezx Ehzex Aitjn Please get in touch for more information or additional photos.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. Hsdpfxszvgvno Aitefn White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: good (used), Year of construction: 2004, I sell the automatic pneumatic end cutting saw OMGA T521 OPT 6600, year 2004. Input table automatic feeding 6,60m (pusher system) Hsdpoz Suzpsfx Aitofn Outut table 3,00m Total length: 10,50m Optimising with automatic cutting sequence modes. Fluorescent chalk sensor reader. Available immediately. CE version. Documentation included.

Condition: new, Unused Alfa Laval LKC-2 check valve for hygienic process applications. Stored in original packaging. Available quantity: 2 pieces Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220001 Hodpfozw H Exox Aitefn Design: LKC-2-ISO-W Connection size: ISO 25 mm / 1" Connection type: Welding end Seal material: EPDM Product-contact stainless steel: 1.4307 (304L) Max. product pressure: 10 bar Temperature range: -10 to +140 °C Internal surface: Ra ≤ 0.8 µm Outer diameter: 25.4 mm Inner diameter: 22.5 mm Net weight: approx. 0.48 kg Condition: NOS / unused, stored in original packaging.

Condition: new, Available quantity: 2 units Unused Alfa Laval LKC-2 check valve for hygienic process applications. Stored in original packaging. Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220002 Design: LKC-2-ISO-W Connection size: ISO 38 mm Connection type: Welding end Sealing material: EPDM Stainless steel: 1.4301 (304) Hfedpfszw I I Iox Aiton Max. temperature: 140 °C Min. temperature: -10 °C Internal surface: Ra < 0.8 µm Outer diameter: 38.4 mm Inner diameter: 35.5 mm Weight: approx. 0.72 kg Condition: NOS / unused, stored in original packaging.

Year of construction: 2004, condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, double three-way shut-off valve -Manufacturer: Wehlan, Double three-way shut-off valve -Type: 33 R 010 A 02 Order No.: 13992 -Connection: DN32 PN16 -Hole spacing: 350 mm -Number: 12x valves available Hfedpfx Aioiqu R Ioton -Price: per piece -Overall dimensions: 490/140/H370 mm -Weight: 14.3 kg/pc.

Condition: new, Available quantity: 6 pieces Unused Alfa Laval LKC-2 check valve for hygienic process systems. Stored in original packaging. Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220005 Design: LKC-2-ISO-W-76-EPDM-304 Valve type: Check valve Connection standard: ISO Connection size: 76 mm Connection type: Welding end Seal material: EPDM Material: Stainless steel 304 Max. product temperature: 140 °C Min. product temperature: -10 °C Hfjdszw I Rijpfx Aiten Internal surface: Ra < 0.8 µm Condition: NOS / unused, stored in original packaging.

Condition: good (used), Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 150 -Hole circle: Ø 240 x 23 mm -Quantity: 3x valves available -Price per piece -Dimensions: 420/285/H310 mm -Weight: 46 kg/piece Hodepul Uiepfx Aitofn

Condition: good (used), Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve Hedpfxoptf Ido Aitsfn -Manufacturer: Prema-Service, Permaflex - pinch valve -Pinch valve pneumatic -Connection: DN100 -Hole circle: Ø 180 x 18 mm -Quantity: 2x valves available -Price per piece -Dimensions: Ø225 x 280 mm -Weight: 15 kg/piece

Condition: new, Available quantity: 4 pieces Unused Alfa Laval LKC-2 check valve for hygienic process applications. Stored in original packaging. Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220003 Design: LKC-2-ISO-W Connection size: ISO 51 mm Connection type: Welding end Seal material: EPDM Stainless steel: 1.4301 (304) Hjdpfx Aezw I Nroitsfn Max. temperature: 140 °C Min. temperature: -10 °C Internal surface: Ra < 0.8 µm Outer diameter: 51.4 mm Inner diameter: 48.5 mm Weight: approx. 0.80 kg Condition: NOS / unused, stored in original packaging.

Condition: used, Rotary valve, rotary airlock Hodpfx Aiszy Hw Hjtsfn Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Manufacturer: M&S Type: PAMS1 Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Air consumption: 1.2 – 2 L/stroke Condition: good Hsdpfoz Sdyiex Aitsfn Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Hjdjz Smvgjpfx Aitjfn

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 Hedpoz Spfrsfx Aitefn The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Hedpfx Aijq Nx Alstsfn Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Hodpfxeq Nf U Es Aitefn Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 Hedpfef Ek Igsx Aitofn -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Hedsz Ng Ayspfx Aitefn Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Year of construction: 1973, condition: used, Cement Ball Mill Brand: Polysius Type: Ball Mill Capacity: 100 tph OPC Diameter: 4000 mm Length: 13500 mm Number of chambers: 2 Manholes: 2 Drive system: Indirect drive Mill bearing system: Trunnion bearing Lubrication units for bearings: Included Scope of Supply: Ball mill - Mill shell Hfsdpfegq Daqex Aitsn - Mill bearings with housing - Liners and diaphragm - Auxiliary drive with motor, gearbox, and coupling - Girth gear between gearbox and ball mill - Couplings between motor and gearbox - Main gearbox (2x) - Main motor (2x) Spare Parts - Reserve gearbox 1450 kW Upon request, a video of the mill can be provided.

Condition: ready for operation (used), functionality: fully functional, power: 0.37 kW (0.50 HP), DMN BL-150 Rotor: stainless steel (scraping blades) Housing: steel 2.5 liters per revolution 20 rpm Motor: 0.37 kW 1380/20 rpm Hsdpfx Aiez Rpn Ustofn 1.24 A 4 units available

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Hodpez R Nptofx Aitsfn Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 2009, Control system for dust extraction systems, with slide gate control including 7 motorized shut-off slide gates: 4 units with a diameter of 140 mm, 3 units with a diameter of 120 mm. Storage location: Hfjdsz R Dupspfx Aiten

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: Hsdpfx Aioz E T Tvstefn - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: ready for operation (used), Three drive units per side (top, bottom, side) Top and bottom motors: 2.2 kW Side motor: 3 kW Spindle diameter: 40 mm Cutting length: 300 cm Hfsdez Ii Afspfx Aiten Overall dimensions: Length: 5.1 m Width: 185 cm Height: 150 cm