Used Elektromotor 110 Kw 2965 U Min B3 B5 for sale (68,579)

Condition: used, Three-phase motor, electric motor -Power: 7 kW -Speed: 1900 rpm -Shaft: Ø 38 mm Tsdpfjcwn Haex Af Tof -Construction: B3 -Protection class: - -Dimensions: 410/275/H330 mm -Weight: 40 kg

Condition: used, Three-phase motor, electric motor -Power: 4.4 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B3 Tsdpfxjcun Rgs Af Tsf -Protection class: IP 33 -Dimensions: 410/390/H300 mm -Weight: 68 kg

Condition: used, Electric motor, three-phase motor -shaft output on both sides -Power: 4 kW Tsdpfsdvil Tjx Af Tjf -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Construction: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

Condition: good (used), Flat gear motor, geared motor, electric motor, electric geared motor, adjustable geared motor, variable speed geared motor -Brake: dismantled -Manufacturer: Nord, adjustable gear motor -Type SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW Tedpowl Uxlofx Af Tjf -Protection class: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of cooling: air, overall weight: 1,012 kg, total width: 1,200 mm, total length: 2,960 mm, total height: 2,000 mm, warranty duration: 6 months, Aircooled chiller RC GROUP PYXIS U 128 P2 S U3 123 KW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.96x1.2x2 m. Weight: 1012 kg. Tsdpfx Afexzznvs Tef Condition: Good

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, first registration: 01/2015, Year of construction: 2015, operating hours: 13,739 h, Liebherr A916 - 110 KW - Central Greasing - Camera Year: 2015 Hours: 13,739 110 KW engine Central greasing system Camera system = Further information = Model year: 2015 Drive: Wheeled Engine displacement: 4,580 cc Tsdpjxxavaefx Af Tof GVW: 18,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: ready for operation (used), , used, slight signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Tedpfextwb Aox Af Tof

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year of Manufacture: New and unused (2023) Weights / Payload: - King-pin load: 23,000 kg - Axle load: 12,000 kg - Total axle load: 48,000 kg Todpfx Asuu Hcfof Tef - Gross vehicle weight (GVW): 71,000 kg - Unladen weight: 16,535 kg - Payload: 54,465 kg Axles: - Axle make: BPW - Hydraulic steering - Pneumatic suspension with lifting/lowering valve - WABCO brake system - Tyres: 245/70 R17.5 – Michelin (Load index: 146/146 F) - 1st axle liftable Dimensions: - Load length: 9,300 mm - Extensions: 6,500 + 6,800 mm - Load platform width: 2,540 mm - Load height: 900 mm Additional Information: - Double-extendable loading platform - Container locks - Width outriggers + wooden outriggers for extension - Lashing rings - Pair of double-folding loading ramps - Central lubrication - 1x spare wheel with holder - JOST landing gear - 24 Volt electrical system - 2.0'' king-pin - One galvanised steel front wall - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information Year of manufacture: 2023 Axle configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle make: BPW; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functionality Load platform height: 655.35 mm (Note: Please verify source, as figure seems inconsistent) Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: like new (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 989354, power: 90 kW (122.37 HP), rotational speed (min.): 1,482 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 470 kg, protection type (IP code): IP55, For sale: LEROY SOMER electric motor, 90 kW, with SCHNEIDER ALTIVAR 110 kW frequency inverter and circuit breaker (can be sold separately). These devices were mounted on a FEVI fan and operated for about 1 year—condition is like new. (€2,500 for the motor, €5,500 for the inverter, or €7,000 for the complete package – price excl. VAT). Technical manuals for both devices are available. Tsdoxrdqhopfx Af Tef

Condition: excellent (used), Year of construction: 2012, operating hours: 106,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Year of manufacture 2012. New stage at 50,000 hours. With WRG. Tjdpfx Afoul U Tyo Tjf 8.50 bar with 20.70 m3/min.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Tsdovf E Avopfx Af Tjf Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg Tsdpfx Asxc Eiyof Tef

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: MA0120, screw compressor ALMIG BELT 30 with 10 bar Aircontrol Basic control Year of construction: 2021 Operating hours: 0 h Technical specifications Type: BELT 30 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 4.12 m³ / min Degree of protection / insulation class drive motor: IP 55 / F Nominal power drive motor: 30 kW Operating voltage / frequency: 400/50 V / Hz Tjdpfxexd T Nwj Af Tof Sound pressure level (DIN 45635 part 13): 76 dB (A) Length: 1270 mm Width: 890 mm Height: 1190 mm Weight: 560 kg Compressed air connection: G 1 1/2" Delivery time on request. Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 Tsdpfx Ajc Sqvlef Tef 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: ready for operation (used), High-performance tool spindle (probably self-made WERA) with Widia KM 40 clamping system , max. 8500 rpmHousing dimensions: 265x152x139mm, dimensions connection flange: 120x125x42mm, with multi-tooth clutch, used, normal traces of use, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Tjdpfsi D Idiex Af Tjf

Condition: good (used), Year of construction: 2011, Item: M-8698-Busch-Vacuum pump 75 kW Used Vacuum Pump Busch, Type WT0730AMX MAX. Vol: 73 m3/min Tjdennz Rpopfx Af Tof Motor: Høyer Motors Denmark 75 kW Year: 02-2011

Condition: good (used), screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor, trough screw conveyor, trough screw conveyor -Conveyor screw: Conveyor length: approx. 2500 mm Tjdpfx Afswna Rls Tjf -Design: stable -Drive motor: EM Marelli 1.5 kW -Gearbox: Rossi -Speed: 24 - 200 rpm -Conveyor screw: Ø approx. 240 mm -Conveyor screw pitch: 230 mm -Inlet/Outlet: 255 x 225 mm -Dimensions: see technical drawing in the photos -Transport dimensions: 3380/600/H670 mm -Weight: 310 kg

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors Tedpexc H R Ejfx Af Tof in stock! Immediately available.

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm Tjdpeptf Iaefx Af Tsf -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Tjdpeity Ecefx Af Tof Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2022, operating hours: 11 h, condition: as good as new (ex-display), Screw compressor ALMIG BELT XP 6- 10 bar (air cooled) Tedog Tdv Aepfx Af Tsf Controller: Aircontrol B Year 2022 / IMMEDIATELY AVAILABLE! Hours: 11 Technical specifications Type: BELT XP 6 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 0.68 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 5,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 67 dB (A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 217 kg Compressed air connection: G 1/2 "

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0171, Screw compressor ALMIG BELT XP 15 - 10 bar (air cooled) Year 2022 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 15 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1,95 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Tjdoityz Depfx Af Tof Rated power drive motor: 15 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 71 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 370 kg Compressed air connection: G 3/4" Visit our store.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, Exhibit, immediately available: new screw compressor ALMIG BELT XP 22 - 10 bar with Aircontrol Basic control The compressor is in very good condition, but visually has a dent. year: 2023 Todpfx Ajlnlt Uof Tef Operating hours: 1,5 Bh Specifications Type : BELT XP 22 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 3.34 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Nominal power drive motor : 22 kW Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1250 mm Width : 880 mm Height : 1515 mm Weight : 681 kg Compressed air connection : G 1" Visit our shop in Erlangen. We always have a wide range of new and used compressors in stock.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, overall weight: 610 kg, total length: 1,250 mm, total width: 880 mm, total height: 1,520 mm, Screw compressor ALMIG BELT XP 16 - 10 bar (air cooled) Tjdpfxjtuc Dro Af Tef Year 2024 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 16 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 2.13 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 15 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 610 kg Compressed air connection: G 1" Visit our store.

Condition: as good as new (ex-display), Year of construction: 2021, Exhibit: New screw compressor ALMIG BELT XP 4 - 10 bar (air-cooled) Bj. 2021 / AVAILABLE NOW! MA0113 Technical specifications Type: BELT XP 4 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 0.48 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Nominal power drive motor: 4 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 62 dB (A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 201 kg Compressed air connection: G 1/2 " Todpfjw Aal Ssx Af Tsf Visit our store. We always have a large selection of new and used compressors in stock!