Used Electrostatic Filters for sale (7,603)

Condition: good (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ vertical Model: M1 Pro with 4th axis including tailstock Manufacturer: DMGMORI Lredpfx Afjxqqt Te Esu Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Max. speed approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Holder taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24-place chain magazine - SK40 - Coolant tank - IKZ pump 20 bar - Filter for coolant - Bed flushing switchable via M function - Coolant spray gun - Spindle blowing air switchable via M function - Cabin roof - Measuring probe - 4th axis (Errors in the technical data and information excepted)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 12 months, input voltage: 400 V, The dryers of the BD 360+ to 1260+ series are heat-regenerated adsorption dryers that remove moisture from compressed air through an adsorption process. All dryers in this series are equipped as standard with an innovative Smart Cycle control algorithm, which leads to significant energy savings during partial load operation without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with generously sized vessels and piping to minimize pressure drop within the dryer. The dryer can deliver dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured, including the following special equipment: - Pressure dew point sensor - Vessel insulation - Blower filter Brand new with 12-month warranty from date of delivery. Lrjdpfx Ajt It N Ssf Esu Optional installation and commissioning at a very competitive price is available from stock in Wettenberg.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details faceplate diameter 3500 mm swing diameter 3800 mm turning height 750 mm Control Siemens 840 D sl Additional information CNC vertical lathe with one turning spindle and two tool carriers on two cross slides Lodpsxqn Nrsfx Af Eeru The machine has been regularly serviced by the manufacturer and is in mint condition. Technical specifications: Max. swing diameter 3800 mm Max. working height 750 mm Slide travel X1 axis approx. 2800 mm Slide travel X2 axis approx. 3200 mm Slide travel Z axis 1000 mm Rapid traverse X/Z axis 32/20 m/min. Faceplate (turning spindle unit with motor spindle): Speed 100 rpm Torque 67,000 Nm at 40% duty cycle Drive power 200 kW at 100% duty cycle Load capacity (chuck, clamping jaws, and workpiece) 35,000 kg Tool carrier: Double tool holder, Capto C8 For internal and external machining Speed range up to 6000 rpm. Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to the tool holders Double tool holder with swivel axis For turning and drilling (MFU) in conjunction with a tool magazine Equipment: CNC control Siemens 840 D sl Chuck Röhm lever chuck KFG 3500/3/6/12 25-station tool magazine, left of the work area 41-station tool magazine, right of the work area Max. tool diameter 150 mm Max. tool weight 20 kg Tool length 400 mm Tool cleaning with air Chip conveyor Coolant system 6 bar, 80 l/min. Knoll paper belt filter High-pressure coolant pump 70 bar

Condition: used, Year of construction: 2003, Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph Ledpfjxqmutox Af Ejru The Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph is a high-precision bottling machine designed for the controlled rinsing, filling, and capping of still and sparkling wines. Configured with a 24-station rinser, 32 isobaric filling valves, and 4 capping heads, it offers a balanced combination of speed, product care, and operational flexibility. The machine is engineered to perform at a nominal capacity of approximately 4,500 bottles per hour for still wine and around 4,000 bottles per hour for sparkling wine, thanks to its dual filling modes: gravity filling for still products and traditional isobaric filling for carbonated products. Constructed from stainless steel throughout, the monoblock provides excellent durability and hygiene. All product contact parts are made from food-grade stainless steel AISI 316L, ensuring resistance to corrosion and maintaining wine purity during processing. Transparent polycarbonate guarding surrounds the working area, allowing visual inspection while providing full operator safety. Each access panel is fitted with interlocked safety switches to meet industry safety standards. The layout of the monoblock is compact yet service-friendly, with easy access to all mechanical and pneumatic components. The integration of the three main functions—rinsing, filling, and capping—into one frame reduces transfer points, limits bottle handling stress, and optimises space usage within the bottling line. Rinsing, Filling, and Capping Operations The rinser section features 24 grippers mounted on a rotating carousel. Bottles are inverted and subjected to a dual-treatment rinse cycle: an initial rinse with water or sanitising solution, followed by an air blow using sterile or filtered air to remove any residual liquid and particles. The grippers are designed for precise neck handling, ensuring secure positioning of bottles throughout the rinse cycle, regardless of format. The filling section uses 32 traditional mechanical isobaric valves with pneumatic actuation. This system is known for its robustness, easy maintenance, and accurate fill level control. The filling process can be operated in gravity mode for still wine, providing faster throughput, or in isobaric mode for sparkling wine, preserving carbonation levels and minimising oxygen pickup. Each valve is equipped with a vent tube for precise level setting and a pre-evacuation stage to reduce dissolved oxygen, improving product shelf life and stability. The capping turret has four heads, capable of applying both cylindrical corks and BVS screw caps. The changeover between closure types is supported by adjustable head assemblies and interchangeable tooling, allowing the machine to handle a wide range of premium wine formats without extensive downtime. The capping process is synchronised with bottle infeed and outfeed to ensure accurate closure placement and torque or insertion depth control, depending on the closure type.

Condition: used, Year of construction: 2016, Technical details: x-travel: 635 mm y-travel: 535 mm z-travel: 460 mm rotary table:: 650 mm spindle turning speed range: 12.000 U/min drive capacity - spindle motor: 10/14 kW feed speeds infinitely variable: 1 - 30.000 mm/min rapid traverse: 45 m/min Tool changer: 60- fach spindle taper ISO: SK 40 chip conveyor: ja weight of the machine ca.: 8,5 t total power requirement: 50 kVA dimensions of the machine ca.: 2.500 x 2.210 x 2.430 m 5-axis simultaneously machining center, first production day ch 2017 HEIDENHAIN iTNC 530 Internal coolant system 70 bar incl. MAHLE filtering system flush gun water flush gun air BLUM Laser measuring ATLM NT A3 BLUM Infrared measuring TC 62 Chip conveyor Ethernet port working hours mainswich ON ca. 16.100 h Lodexqfzlepfx Af Eeru working hours spindle ON ca. 6.200 h *

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,620 h, load capacity: 3,500 kg, lifting height: 4,680 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Ledpfxexqitle Af Esru Fork extensions, side shift, 3rd valve, 4th valve, heater, soot filter, full cab, air conditioning,

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Lredjpa Nz Djpfx Af Eju Radial runout : 0,02 mm Center opening : 346 mm max. dynamic axial force : 70000 N B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: good (used), Year of construction: 2008, functionality: fully functional, Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Tool and Cutter Grinder Manufacturer: Schneeberger Model: Aries ENP4 Control unit: GE Fanuc Power Mate, 2 CNC axes, simultaneous interpolation 10.4″ LCD color touchscreen, RS232 Year of manufacture: 10/2008 Machine table: Length: 1000 mm, Width: 310 mm Grinding head, grinding spindle (motorized swivel): Drive spindle power: 7.5 kW Speed: 0 to 9,000 rpm Power: 15 kVA / 11 kW Rated current: 16 A Axes: Longitudinal travel X mm: 400 (CNC) Cross travel Y mm: 220 (CNC) Vertical travel Z mm: 295 (CNC) Resolution: 0.001 mm Workpiece rotation A: degrees free (CNC) C axis, swivel angle: +50° / -270° Lredjw Dvwgjpfx Af Eju Position display integrated in the control unit. Measuring system resolution: 0.001° Centre height: 210 mm Accessories: ILT Unifil filter unit Tool holder Grinding wheel Note: Ideal for toolmaking and re-sharpening Optimal grinder for slots, peripheral-, flank-, face-, back- and side-surfaces Weight: 2,500 kg Required space (L x W x H): approx. 2.3 m x 2.3 m x 2.3 m Complete documentation available. Inspection under power possible at short notice. If you have further questions, we are happy to assist. Price ex stock here, plus VAT. Condition: good – ready for demonstration

Year of construction: 2023, condition: used, machine/vehicle number: 10000 295434, Work station with JEDTEC magazine, vision inspection system with camera system for 6 sides, output station with TRAY magazine JEDTEC, air purification system with filter unit. NOTE: The sorting system is as new and has not yet been used in production! Lrodpfexqihvox Af Eeu

Condition: used, Year of construction: 2000, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… Lredpfoxqmrfox Af Eou So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, Year of construction: 1990, Technical details: grinding length: 1500 mm grinding width: 750 mm workpiece height: 700 mm Lodpfx Aexqfw Hjf Ejru total power requirement: 25 kW weight of the machine ca.: 6800 t Accerories main spindle power 11 surface grinding machine, coolant device with magnetic separator and filter balancing device, dresser, lamp *

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,902 h, load capacity: 2,500 kg, lifting height: 4,710 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Lsdpfjxqitfox Af Eoru Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Lsdpfx Aswq Ryvef Eoru Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume: 580 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Precision profile grinding machine PPSM Habrama 2200 rack and pinion grinding machine Manufacturer [manufacturer]: Habrama Moving column machine - ideal for automatic loading Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Year of construction: 10/2009 Grinding range: Module 0.1 to 22 cutting and special profiles, special pitches Travel path axes: X-axis (longitudinal): 2200(2500)mm Y-axis(transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W-axis: 125mm B2-axis: +20°/-20° Workbench: 390 x 3,750mm Max. Table load: 4000kg Feed speed X-axis: 21m/min Y-axis feed speed: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding wheel holder: 100mm H5 Cutting speed programmable: constant 10-80 m/s Grinding wheel: ceramic or resin-bonded Grinding wheel width max.: 101mm Grinding wheel ø: min. 210mm-max. 400mm Bore diameter of grinding wheel: 152.4mm (6 inch) Grinding range: up to module 22 special profiles freely programmable Hybrid clamping device / plates Coolant system: approx. 4000 liters with integrated deep-bed filter Ljdpsu Rqg Iofx Af Esru Machine total connected load: 100kVA Weight: 20,000 kg Space required [needed space ]approx. (L x D x H): 5,200mm x 3,000mm x 2,600mm Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm Ljdpfx Aexqhnzsf Eoru - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Lrodpfx Ajxqgv Dsf Esu Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 384, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 500 mm, overall weight: 1,500 kg, jaw width: 160 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 1,300 x 500 mm Magnet dimensions: 1,020 x 450 mm Grinding wheel diameter: 250 mm Jaw width: 160 mm MACHINE DETAILS Lrjdsxqf Uxjpfx Af Eeu Electrical Data Operating voltage: 380 V Control voltage: 220 V Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3 T-slots Magnetic chuck Various grinding wheels Vice Belt filter system

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,821 h, load capacity: 2,000 kg, lifting height: 4,710 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Ledpoxqir Usfx Af Eeru Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Lodpfx Afjxqd Dfj Ejru Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Mägerle rack grinding machine Grinding machine MFP-L Siemens CNC - Rack milling grinding machine see Studer Kellenberger Manufacturer: Mägerle Type [ type]: MFP-L-260-75 Steuerung [control unit]: Siemens 840D Sinumerik Incl. handwheel Year of construction: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support [cross stroke oft he grinding support] : 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm Peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min Minimum infeed 0.001mm Drive power: Grinding wheel (AC) 75kW Total connected load [total connection power]: Machine 113kVA Knoll coolant filtering equipment dimensions approx: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Lrsdpfx Aou Rqrwsf Eeu Machine weight: 21,000kg Space required [needed space ]approx. (L x D x H): 7.06m x 3.7m x 3.26m Complete documentation is available.

Condition: used, all stainless steel suitable for thermic oil heating 210 kW thermic capacity frying length 3.000 mm belt width 1.000 mm adjustable speed infeed and outfeed conveyor isolated canopy 10 kW sediment removal system filter oil level control low - high oil circulation pump Ljdpfxoxqb Uuj Af Eeru suitable for CIP-cleaning electrical hoists dimensions (l x w x h) : ± 6.650 x 2.300 x 3.500 mm

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, Equipment: cabin, As Constmach, we manufacture stationary asphalt plants designed to deliver maximum efficiency, durability, and quality for your construction and infrastructure projects. Thanks to our modern production technologies, our plants, with capacities ranging from 60 to 200 tons per hour, enable you to produce high-quality asphalt mixtures. Each component—the drying drum, mixer, burner, and filter systems—is designed for long life and high performance. This ensures minimum energy consumption, maximum mixture homogeneity, and low maintenance costs during production processes. Key Features: High Capacity: Different models with a production range of 60–200 tons/hour provide the right solution for every project. Flexible Design: Customizable structure according to your project requirements. Quick Installation: Can be put into operation in a short time thanks to the modular system. Advanced Control Systems: PLC-based automation minimizes operator errors and optimizes the production process. Add power to your projects with Constmach stationary asphalt plants. Make a difference in asphalt production with our facilities that offer long-lasting, efficient, and environmentally friendly production advantages. Choose Constmach assurance to achieve quality infrastructure solutions! Why Constmach Stationary Asphalt Plant? Lrjdpfx Afoxp Ut Ie Esu Superior Quality: Our stationary asphalt plants offer reliable operation for many years with their high-strength steel structure and durable components. High Efficiency: The production process is faster and more consistent thanks to fully automatic control systems and precise dosing technology. Environmentally Friendly: Bag filter systems with low emission values allow you to produce without harming the environment. Easy Maintenance: Maintenance operations are quick and easy thanks to the modular design. Customer Support: We are with you every step of the way, from pre-sales engineering consulting to after-sales technical support. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products for the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,044 h, load capacity: 2,500 kg, lifting height: 4,710 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Lrsdpfx Aexqir Ijf Eju Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, soot filter, full cab, air conditioning,

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Lrodoxqdz Dspfx Af Esu Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, grinding length: 3,200 mm, total length: 9,500 mm, Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer: Favretto Model: MD 300 Control Unit: DTG Plus / Siemens 840D Year of Manufacture: 10/2006 Table Size: 3,220 mm Grinding Travel (X/Y/Z): 3,200 x 900 x 725 mm Lrjdpfsxluh Rox Af Eju Longitudinal Table Speed: 1–40 m/min Cross Table Speed: 5 m/min Cross Locking Mechanism Speed: 1–50 m/min Maximum Load: 4,000 kg (without magnetic chuck) Grinding Wheel Size: 508 x 203.2 x 100 mm Grinding Wheel Speed: 1,400 rpm Grinding Spindle Motor Power: 22 kW Machine Weight approx.: 17,500 kg Machine Dimensions: 9,400 x 3,550 x 3,000 mm Accessories: - Magnetic tabletop - Coolant unit with paper filter - Various grinding wheels - Documentation Inspection under power can be arranged at short notice. For further questions, please feel free to contact us. Price: ex-stock, plus VAT Condition: good – ready for demonstration Delivery: ex-stock – as inspected Payment: net, due upon receipt of invoice