Used Electrical Cabinet for sale (32,142)

Condition: used, functionality: fully functional, machine/vehicle number: 6467216, Year of construction: 2019, operating hours: 2,098 h, load capacity: 1,600 kg, fuel type: electric, construction height: 950 mm, fork length: 1,150 mm, empty load weight: 565 kg, drive type: Elektro, Low lift truck Chassis number: 6467216 Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Hodpfjuhwnwox Aahop Battery Ah: 150Ah Battery year of construction: 2020 Description: BT LWE 160 No.: M0176 Year of construction: 2019 Operating hours: 2,098 The device is visually and technically in very good condition. Charger on request. We have two other devices of this model type in our inventory. The fork length varies between 900mm and 1150mm. The height of one appliance is 1170 mm due to the presence of a load guard. Fast and uncomplicated transportation possible by arrangement! Subject to errors and prior sale, sale only to tradespeople. Any sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, functionality: fully functional, machine/vehicle number: H2X386G11198, Year of construction: 2016, operating hours: 6,728 h, load capacity: 1,500 kg, lifting height: 3,200 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, empty load weight: 3,120 kg, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: H2X386G11198 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Hodpfxsuhw Rxe Aahop Description: Linde E 15 No.: R0173 Year of construction: 2016 Operating hours: 6,728 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Sideshift, 3rd valve, 4th valve,

Condition: used, machine/vehicle number: 15669, Year of construction: 2017, operating hours: 10,800 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,562 mm, load center: 500 mm, construction height: 2,160 mm, fork length: 1,200 mm, front tire size: 18x7-8, rear tire size: 16x6-8, overall weight: 3,156 kg, enginetype: Electric, manufacturer: Still Hodszhzcmopfx Aahep

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,401 h, load capacity: 4,500 kg, lifting height: 4,406 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,050 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Hsdjwtu Aaepfx Aahsp Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery year of manufacture: 2019 Description: The vehicle will undergo a UVV inspection. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. 3rd valve, 4th valve, front work lights, heater, full cab.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 70 h, load capacity: 3,000 kg, lifting height: 4,710 mm, free lift: 1,475 mm, fuel type: electric, mast type: triplex, construction height: 2,145 mm, power: 16 kW (21.75 HP), fork carriage width: 1,116 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, total length: 2,520 mm, drive type: Elektro, construction width: 1,244 mm, Electric 4-wheel forklift Load center: 500 Fork width: 122 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 15 Condition: Like new Technical condition: very good Front tire type: Superelastic Hedpfozgybfox Aahop Front tire size: 23x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 560Ah Battery manufacturer: Midac Battery type: PzS Battery year of manufacture: 2024 Battery condition: 80 - 100% Side shifter, 3rd valve, 4th valve, rear work light, front work light, full cabin, full free lift, CE certificate, interior mirror, rotating beacon, windshield wiper

Condition: new, functionality: fully functional, machine/vehicle number: A2A8, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 4,800 mm, free lift: 1,735 mm, mast type: triplex, construction height: 2,780 mm, power: 40 kW (54.38 HP), fork carriage width: 1,845 mm, fork length: 1,970 mm, empty load weight: 9,800 kg, total length: 3,610 mm, drive type: Lithium-Ionen, construction width: 2,020 mm, Electric 4-wheel forklift Chassis number: A2A8 Load center: 600 Fork width: 150 mm Fork thickness: 65 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 8.25-15NHS Front tire condition: New Rear tire type: Pneumatic Hedezhy Alopfx Aahjp Rear tire size: 8.25-15NHS Rear tire condition: New Battery voltage: 354V Battery Ah: 228Ah Battery manufacturer: Hyster Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: New Description: Hydraulic controls via manual levers, all-steel cab with front and rear windshield wipers, cab heater, double side mirrors, handle for reversing with horn, USB port, 2 front LED work lights with brake, tail and reversing lights, acoustic reversing warning signal, yellow flashing beacon, cold ambient construction (-10°C to +45°C), rear-mounted camera with LCD display. Side shifter, Heater, load guard, full cab, full free lift, CE certificate, lithium-ion technology, interior mirror, windshield wipers.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 1,983 h, load capacity: 1,600 kg, fuel type: electric, drive type: Elektro, Low-lift pallet truck Hodpfx Aajzhyzhjhep Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery year of manufacture: 2015

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 520 h, load capacity: 2,000 kg, lifting height: 3,470 mm, free lift: 1,716 mm, fuel type: electric, mast type: duplex, construction height: 2,260 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Battery year of manufacture: 2022 Hjdszhyyqopfx Aahsp 3rd valve, 4th valve

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,858 h, load capacity: 2,000 kg, lifting height: 3,840 mm, free lift: 1,868 mm, fuel type: electric, mast type: duplex, construction height: 2,471 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Hodpfx Aszhyxtsahop Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Battery type: Lithium-ion Side shifter, 3rd valve, 4th valve, heater, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 585 h, fuel type: electric, drive type: Elektro, Electric platform truck Condition: Ready for use and fully functional Technical condition: good Hodpsvw Ewqofx Aahep Battery voltage: 48V Battery year of manufacture: 2022

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,277 h, load capacity: 5,000 kg, lifting height: 4,675 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, drive type: Elektro, Electric four-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Hodpju Adfzsfx Aahjp Description: Battery manufactured in 2025 Side shifter, fork positioner 3rd valve, 4th valve, windshield, half-cab, heater, full cab

Condition: used, functionality: fully functional, machine/vehicle number: H2X386H08196, Year of construction: 2017, operating hours: 7,324 h, load capacity: 1,400 kg, lifting height: 4,650 mm, fuel type: electric, mast type: simplex, construction height: 2,840 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: H2X386H08196 Mast type: Standard Condition: Ready for use and fully functional Hedpfeuhxcvex Aahsp Technical condition: good Battery voltage: 24V Battery capacity: 625Ah Battery year of manufacture: 2017 Description: Linde E 14 Evo, serial no.: M0132, year of manufacture: 2017, operating hours: 7,324. The unit is in good optical and technical condition. Charger available upon request. Fast and straightforward transport possible after consultation! This advertisement serves only to identify the unit! A detailed description of the condition and possible features will be provided individually upon request! Errors and prior sale are subject to change; sale only to commercial customers. Every sale of used goods is subject to the exclusion of warranty and/or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other units available on site. Side shifter.

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Hsdpfxoy Ntl Sj Aahsp terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Hsdpoyzt R Sjfx Aahop

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz Hjdoxl Hi Topfx Aahep delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Hedowlkcaopfx Aahjp Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Hedpfjwlkb Nsx Aahop Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Hjdszgv U Uepfx Aahop Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Hjdpfx Aezgvx Teahjp Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in industrial environments. Technical Data Crane bridge span: 5,100 mm Support distance L: 6,290 mm Support distance B: 5,100 mm Bottom flange height of crane bridge: 4,145 mm Bottom flange height of gantry girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel construction group: 18/30/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection class: IP55 Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder width: 66 - 220 mm Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel support and girder construction Inspection book available EC declaration of conformity available Assembly and operating instructions available Transport Data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system: approx. 2,000 - 3,500 kg Hsdpfx Aajzgu Iaohop Condition Used The system was installed and in operation. Visual condition as shown in the pictures. Scope of Delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Inspection book EC declaration of conformity Documentation and instructions Accessories as shown in the pictures Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Hodoxa Endspfx Aahjp Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Operation: Radio remote control Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Condition: good (used), Year of construction: 2018, operating hours: 251 h, load capacity: 1,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,565 mm, empty load weight: 750 kg, mileage: 251 km, Electric pallet stacker Brand: Still (Germany) Year of manufacture: 2018 Hedpfxoy Sm Rte Aahjp Load capacity: 1,000 kg Lifting height: 2,024 mm Mast retracted height: 1,565 mm Hours: 251 Battery included, with charger Video to follow

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Hjdpfjzgtzlsx Aahsp Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time you need for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in the automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotary basket and lined with stainless steel. Different blasting nozzles and an ionization system ensure reproducible results. A basket with a soft, replaceable liner protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. Hodpfszgr T Tox Aahep This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to the user-centered design, everything is easily accessible and safe to use. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Hjdozgrzqspfx Aahop FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.