Used Edgebander for sale (807)

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Cjdezuyh Uspfx Albehb Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Chedpfx Ajzuykpjlbjb Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Cjdpezv S Snjfx Albohb Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Chjdpfxozmy N Nj Albsb Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, Csdoztpw Nspfx Albohb 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate Chjdszttnfopfx Albsb

Condition: ready for operation (used), Year of construction: 2008, workpiece width (max.): 60 mm, total height: 1,550 mm, total width: 1,100 mm, overall weight: 750 kg, product length (max.): 3,200 mm, Edgebander manufactured in 2008. This FELDER G500 features an edge thickness capability of 0.4–5.0 mm, with an optional 8 mm. It accommodates workpiece thicknesses from 8 to 60 mm and offers a feed speed of 11 m/min. The machine includes automatic edge feeding, a Teflon-coated glue roller, and multiple finishing positions. If you are looking to get high-quality edging capabilities, consider the FELDER G500 edgebander we have for sale. Contact us for further details. Machine • FELDER G 500 Edgebanding Machine • Voltage: 400 V • Frequency: 50 Hz • Phase: 3N • Current: 14 A • Power: 5.5 kW • Edge Thickness: 0.4–5.0 mm (optional 8 mm) • Workpiece Thickness: 8–60 mm • Minimum Workpiece Width: 70 mm • Minimum Workpiece Length: 140 mm • Automatic Edge Feeding • Strip Magazine • Coil Diameter: Ø800 mm Cjdozugwvspfx Albohb • Suitable Edge Materials: PVC, ABS, Solid Wood Veneer • Glue Pot Capacity: 2 kg • Glue System: EVA Hot-Melt Granulate • Teflon-Coated Glue Pot • Glue Pot Heating Time: Approx. 12 min • Automatic Glue Temperature Reduction • Pressure Unit with 1 Straight Pressure Roller and 2 Conical Pressure Rollers • End Trimming Unit • Flush & Radius Trimming Unit • Free Finishing Positions: 3 • Chain Conveyor Feed System • Feed Speed: 9 m/min • Extraction Connection: Ø120 mm • Machine Length: 3,200 mm • Machine Weight: 750 kg Additional Equipment • Scraper Unit (mechanically adjustable for R = 2 mm) • Buffing Unit • 2 Motors • 1,400 rpm • 900 W Technical Specification Feed Speed 11 m/min

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. Chsdpozuhc Tofx Albjb - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm

Condition: excellent (used), Year of construction: 2011, For the complete technical description, please download the PDF document or request it directly. Used laser/PU edge banding machine for batch size 1 Manufacturer: Homag / Bargstedt Year of manufacture: 2011 Consisting of: Homag edge banding machine Power KFL610/21/PU/L/25/SI14 - Infeed system SI14 - Outfeed conveyor TF 11 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt belt conveyor TFB100/021/12 Bargstedt roller conveyor TFR560/S/_/28/31/12 Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt chain lift buffer TPK400/30/12 Bargstedt belt conveyor TFB100/041/12 Bargstedt belt conveyor TFB100/031/12 Chjdpfx Alezt N Egebeb

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase Chodpfx Aoztbutelbjb - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Cjdpfeztl Scsx Albohb - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Chodpezq Ab Nefx Albsb Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Chsdpjzrpnlsfx Albsb Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Grinding unit Cjdpfx Aljzna Uzjbohb Gluing system Edge pressing unit Heading unit Radius milling unit Rounding unit Edge scraping unit Glue scraping unit Brush unit 6,767 operating hours and 454,000 meters of edge processed Available starting in September 2026.

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Chjdpfx Aezpzy Uelbsb Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Pre-milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic press unit 1816 - Trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush) - Blower nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper, 1964 - Exhaust hood set - Complete set of protective covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Edge banding height, max.: 55 mm - Edge banding strip length: min. 350 mm Chjdpozk Nlhefx Albob - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: available shortly Location: Röllbach

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: Codpfxezk Nmre Albohb - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 For pre-coated edge banding material Edge banding up to 1.3 mm with roller trimming with flush trimming using a blade Chsdpfx Aljzk Ntljbeb with flush milling/chamfer milling top/bottom with HF motors Location: Röllbach Availability: at short notice

Condition: good (used), Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Chsdpfx Ajzvq Eyjlbjb Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Cedpfxjzku Rps Albjhb Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Codpfowucm Aox Albshb Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ

Condition: good (used), Year of construction: 2005, Brand: Hebrock Cjdpfx Ajq H Spvjlbehb Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Codpszu T Sgofx Albshb Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Codpjvvkfwjfx Albshb

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Csdpfx Alozyy Avebjhb Equipment and technical data: