Used Edge Off for sale (4,725)

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Ledpfx Afsvvkdte Eeru

Condition: used, Year of construction: 2008, Used machine Year of construction: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Edge banding from roll automatic cross-cutting unit Flush trimming unit for flush and radius milling, r = 2 mm Motor 0.37 kW - 9000 rpm Ledpfexppwbox Af Eoru Extraction connection: 2 x 60 mm Heating capacity approx. 1150 W Total power 2 kW Weight approx. 240 kg Dimensions 2040 x 1240 x 1260 mm Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Ljdpjxpn Ufofx Af Esru Feed speed 8 m/min.

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Lrsdpfexq A Ebsx Af Eeu Pre-milling cutters, Glue application by roller, Equipped with glue drain, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Power requirement: 7.4 kW, Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Condition: good (used), Year of construction: 2013, Edge Banding Machine Manufacturer: Brandt Type: KDF 440 Year of Manufacture: 2013 Edge Thickness: 0.4 - 3 mm Workpiece Thickness: 8 - 60 mm Feed Rate: 8 - 14 m/min, Vario Joining Unit: Yes Pre-melting Unit: Yes Cross-Cut Saw Unit: Yes Radius Flush Trimming Unit: Yes Corner Rounding Unit: Yes Radius Scraper: Yes Surface Scraper: Yes Ljdpowmby Sjfx Af Esru Buffing Unit: Yes

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, feed rate X-axis: 9 m/min, total length: 3,700 mm, workpiece height (max.): 50 mm, height adjustment type: mechanical, input voltage: 400 V, tank capacity: 1 l, Automatic edge banding machine with lower glue pot for hot melt adhesive (EVA), feed chain conveyor, jointing and trimming unit, and corner rounding unit Feed speed: 9 m/min Panel thickness: 50 mm Edge thickness (rolls): 3 mm Edge thickness (solid wood strips): 5 mm Chain feed Pre-milling and jointing unit Ledjw Dq Hcepfx Af Eoru Corner rounding unit Unit adjustment via edge pieces Simple and intuitive operation Machine features: - Display: 7” color touchscreen - Capability to work with storable programs - Graphic interface shows the processing outcome directly on the panel - Single-click selection of desired processing mode Interchangeable glue pot: - 6 heating elements ensure consistent, even glue temperature - Motorized glue application roller with internal electric heating element - Teflon-coated glue pot for quick and thorough cleaning - Quick-change device allows fast and simple replacement of the glue pot - Glue pot capacity: 1 kg - Depending on glue type, two different temperatures with automatic standby function can be set Tool kit R = 2 mm - Fast changeover between processing modes: thin edge, radius, solid wood strips - 2 high-frequency motors, 200 Hz, 12,000 rpm - Flush trimming unit with multi-profile tool for thin edge and radius (solid wood) - Nesting - Scraper unit - Surface scraper Buffing unit: - The machine is equipped with a buffing unit Cleaning spray aggregate: - Electronically controlled spray function - 2 spray nozzles (top and bottom) and fluid reservoir LED interior lighting: - LED interior lighting allows safe adjustment of units even in low ambient light

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Lsdpfxsvvkd Ts Af Ejru

Condition: excellent (used), Bargain from liquidation with feed and oscillation Ledpfx Aoxn Skzjf Ejru

Condition: good (used), Year of construction: 2010, Fully functional Lsdjxqgr Sspfx Af Eeru Year of manufacture: 2010 Radius scraper blade Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: excellent (used), Edgebander Brandt ambition 1210 pre-milling unit Lrjdexqxy Uspfx Af Eju glue application pneumatic pre-cut guillotine pressure rollers trimming saws angled for final cut top and bottom milling unit R1 – R2 profile scraper flat scraper max workpiece height 50 mm max edge thickness (in roll) 3 mm feed speed 10 m/min machine length 380 cm machine well maintained and in very good condition.

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm Lredpfohr D Ayox Af Esu with feed unit: Fields S/308, year 2011 and accessories

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, AVAILABLE FROM APRIL 2026!! MACHINE IN OPERATION. TOTAL METERAGE AS OF 22/10/2025 – 426,050.00m Return conveyor for elements included in the price! Lrodpfx Afexqb Rcj Eju E9001500 Edge Banding Machine, One-Sided "STREAM A" Model CE compliant E9001560 One-sided edge-closing unit, MODEL STREAM A / 6.0 E8000091 Narrow Element Infeed Device E8000086 NC OS Package – Set of devices enabling automation MACHINE CONFIGURATION Includes: - OS-2: 2 NC OSI units on infeed fence and first copying unit for pre-milling. - OS-1: 1 NC OSI unit on edge pressure rollers. E9901008 Pre-installation kit for return system E8000094 Flat air table at machine infeed E8000041 EDGE BAND TAPE POSITIONS – Automatic edge change, NC-controlled, standard NC axis for edge guide device. E8000048 Twin gluing system for use with both EVA glue and granular polyurethane (PUR) glue E8000101 QM-705 Unit for EVA hot-melt adhesives E8000051 Additional glue reservoir for machines with EVA glue capacity with PRE-MELT UNIT. For granular glue only E8000107 Nitrogen unit for PU glue. E4000286 Glue application head and glue tank CC10 preheating and maintenance station E8000038 Adjustable infrared lamp AdIRL-700 E8000314 Pre-milling unit FI-502 with diamond cutters H = 45mm included, Z = 2+2, 30° E8000032 ADZ-700 Anti-stick unit E4000232 Pair of diamond milling cutters H = 65 mm, Z = 3+3, 45° E8000225 IT90-S Saw Unit E8000109 Antistatic fluid applicator for finishing and contour rounding unit E8000405 RS-100 Upper and Lower Edge Milling Unit E8000415 PRO-NESTING KIT for Upper and Lower Edge Milling Unit E0001597 Pair of flat milling cutters with sliding engagement for upper and lower edge milling unit E8000508 RF400 Fine Milling Unit E8000527 "PRO-NESTING" kit for Fine Milling Unit E0001639 Pair of multifunction milling blades for fine milling unit, 25° milling – R = 1 / 1.5 / 2 mm E8000706 Edge Rounding Unit AR30 NC - 2 motors E8000744 Sliding fluid application unit before Edge Rounding Unit E8000718 Additional pair of motors for quick change of finishing milling heads E0001706 Pair of cutters with replaceable blades, R = 2mm – for edge rounding unit E0001708 Pair of cutters with replaceable blades, R = 1mm – for edge rounding unit E8000910 RB400 Edge Turning Unit E8000914 “PRO-NESTING” kit for Edge Turning Unit E0001915 Pair of multi-profile milling bits for edge scraper, 25° inclination – R = 1 / 1.5 / 2 mm E8001011 RCC-701 Glue Turning Unit Kit for sensitive panels for glue scraper unit E4000150 – Independent pneumatic shut-off of upper/lower unit. – Glue system for regulating scraper blade pressure. E8001035 SP-501 Cleaning Brush Unit E8000034 LPT-700 Cleaning liquid applicator for Brush Unit E8001000 PH-700 Hot air blower NSN19000 Parallelogram linear support, scissor type

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lrodpjvvkfdofx Af Eju

Condition: used, Year of construction: 2003, machine/vehicle number: 0-202-07-6152, Homag Optimat KFL525/8/A3/15 Double Sided Edge Bander (2003) Lodpfxoxny Ubj Af Eeru

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper Lrsdpfx Afjlht Hwj Eou F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Lrsdpfovvll Ssx Af Eju Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Ledpfsvvkfqsx Af Esru

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers Lrodjvk R Arepfx Af Eou 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Digital 3D edge finder MarTest 802 EW Lrsdpfx Ajqff Rmsf Eju Working ranges X, Y, Z axis: - 2 to 4 mm iffernschrittwert_mm: 0.005

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Lrodpevvkfwofx Af Eou Storage location: Nattheim

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Lredpfovr Hw Ijx Af Esu Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Ljdpfswmf E Sox Af Ejru

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Lsdpfx Asvvkg Ief Eoru Storage location: Nattheim

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Lodpfjw Aim Eox Af Eoru

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Lredpjw Aig Sofx Af Eeu