Used Ebu for sale (31)

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Technical Data: - Pressing force: 75 t Nsdpfx Adsxxwc Ro Necl - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm - Height-adjustable table - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm - Weight approx.: 4000 kg

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Ncjdpfxjfrzlme Ad Nsl Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Nodpfjxq Exwsx Ad Necl

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm Nodpfob Tdqujx Ad Nscl tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Drive Motor: 380V 1.1KW Required space: 1600 x 850 x 2000 mm Nodpfom Uxzusx Ad Nocl Weight: approx. 1450 kg

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation Njdpfx Asdzqltod Necl - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm Nodpfxstqqxbo Ad Nocl total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Ncodsiuxwqjpfx Ad Nol Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Ncodpfev U Nm Dsx Ad Nol Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, ram adjustment: 80 mm, total height: 24,100 mm, table width: 600 mm, table length: 800 mm, total width: 18,300 mm, total length: 20,400 mm, overall weight: 4,650 kg, pressing force: 75 t, To be viewed under power. Ncodpfx Aorr Sybed Njl

Condition: used, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Njdpfxjv T Dapj Ad Nocl Stroke rate 50 /min.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Nsdpfx Aov I Uwued Njcl Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm