Used Duo Grind for sale (5,367)

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove Iedpfx Afofv Au Asfetr graffiti, remove mold, and repair damage caused by fire.

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Iodpfx Afoxr A A Nsfjtr Connected load: 2.4 / 3.7 kW Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H)

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Itjdpfx Aexrcahjffsr Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Year of construction: 2025, condition: new, Photovoltaic modules from a non-implementable project for sale. Module: QCELLS Q.Peak Duo M-G11S+ 410 Wp Sale only in full pallets of 36 units at €1,400.00 per pallet plus VAT. Isdpfx Afexvacnjfotr Total quantity: 366 pallets. Location: 01587 Riesa.

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 Itsdpfx Aoxqrgzoffjr chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Itodpfx Asxuqc Neffer Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm Iodpfx Aehr R Iujffetr • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Ijdotq Twvepfx Affotr Since the contact wheels are directly driven, this system could also be used for polishing or brushing. If desired, this system can also be offered completely overhauled.

Condition: like new (used), Year of construction: 2020, Engel duo 5160/500 (2020) Clamping force: 500 t Screw diameter: 90 mm Ijdjwznqyspfx Affstr Distance between tie bars V: 910 mm Distance between tie bars H: 830 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Carbide saw double side grinder VOLLMER model Fini-Duo Itsdpfev Ef Tbjx Affsr

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Itsdjxl Ah Sjpfx Affjr

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Isdpfx Aoxuqbroffotr Injection pressure: 1,910 bar MACHINE DETAILS Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: new, functionality: fully functional, overall weight: 7 kg, SAUER DUO S3 renovation milling machine, brand new Voltage: 230V / 50 Hz Power: 1500 Watts RPM: 2200, head diameter 150 mm. A floor milling machine for: removing adhesives, removing paints, levelling concrete, etc. With proper dust extraction, the machine is suitable for asbestos remediation. Itedpfjxp Supox Affor We can offer the machine HM Splite with multiple milling heads HM Split. SAUER Trioschleifer DTS 850. Demonstration machine 230 Volts / 50 Hz 750 Watts, weight 2.6 kg. Speed: 1500 - 13,000 RPM. We can supply this machine with a wide range of accessories (see the pictures).

Condition: like new (used), Year of construction: 2021, operating hours: 44 h, load capacity: 2,000 kg, lifting height: 1,724 mm, fuel type: electric, mast type: duplex, construction height: 1,390 mm, mileage: 44 km, AS GOOD AS NEW This 2021 Still electric DUO stacker is in excellent condition; Capacity: 2,000 kg; The stacker lifts up to 1,724 mm; Drive-through height: 1,390 mm; Equipped with INITIAL LIFT, making it ideal for uneven floors; ONLY 44 hours on the clock! Itjdpfxsxhdhxs Affjr The 2021 battery features an automatic filling system and an external charger; Schedule an appointment for a test drive. Watch the video on YouTube.

Condition: excellent (used), Year of construction: 2016, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic CC300 controll Hours: 38.000 Euromap 67 2 core pullers Iedpfew Hbylox Affetr Ecodrive 2 pumps Quick clamp system

Condition: excellent (used), Carbide saw double side grinder VOLLMER model MULTI DUO 2200 Isdpfx Aswdyg Seffotr

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Itodpsxguutsfx Affjr Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Year of construction: 2011, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: DUAL 1200 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2012. Textile oven almost new, overhauled and cleaned. Sold new for just over €20,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Dual 1200 drying tunnel: - MAX POWER: 19 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 1200 mm - MAX PRODUCTION: 270 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Itedjiw Egpepfx Affsr Electric Modular Dryer Forced Hot Air System Drying Area: 2000x1200 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 Ijdpjxf A Npsfx Affotr MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: good (used), Year of construction: 2021, operating hours: 483 h, load capacity: 2,000 kg, lifting height: 1,724 mm, fuel type: electric, mast type: duplex, construction height: 1,390 mm, mileage: 483 km, This electric DUO stacker from Still, manufactured in 2021, is in good condition. The load capacity is 2,000 kg. The stacker lifts up to a height of 1,724 mm. Drive-through height is 1,390 mm. Equipped with INITIAL LIFT, making it ideal for uneven floors. ONLY 483 hours on the clock. The 2021 battery features an automatic filling system and an external charger. Schedule a test drive. Watch the video on YouTube. Isdpjxhdhrsfx Affjtr

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E Iodpfewnqk Njx Affstr 22 Hotrunner 4 core pullers PC, ABS material

Condition: good (used), Double side grinder for carbide saws VOLLMER model Finimat DUO TS 1000 Itedpsvgfifsfx Affor

Condition: good (used), mileage: 315,294 km, power: 309 kW (420.12 HP), first registration: 08/2010, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,280 mm, loading space width: 2,400 mm, Year of construction: 2010, Equipment: ABS, air conditioning, crane, cruise control, retarder, = Additional options and accessories = - Aluminium fuel tank - Brake booster - Electric windows - Speed limiter - Intarder - Air suspension - Parabolic suspension - Sun visor Itedpfx Afswwtk Rjfsr - Toolbox - Power take-off (PTO) = Remarks = Volvo FM 420 8x4-4 Tridem, hub reduction, Euro 5 engine, Hiab crane 322 - 6, remote control, 6 hydraulic extensions, manual gearbox, air conditioning, cruise control, Belgian registration. = Further information = Transmission: 12-speed manual gearbox Front axle: Steering; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf spring Rear axle 1: Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Reduction: external planetary axles; Suspension: air suspension Rear axle 2: Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Reduction: external planetary axles; Suspension: air suspension Rear axle 3: Lift axle; Steering; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Crane: Hiab 322-6 HIDUO, year of manufacture 2010, rear mounted on chassis Technical condition: good Visual condition: good

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm Itodpfx Aed Id Ubsffor suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Motor protection switch

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Itedpfx Afexf An Sofer Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system