Used Dry Spray Wall for sale (10,957)

Condition: like new (used), Year of construction: 2012, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-Heating - before spray booth - and after Cleaning - and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Dksdpfx Acovy Ebhs Nsh Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: used, empty load weight: 8,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, suspension: air, tire size: 385/65 R 22.5, color: yellow, mileage: 331,994 km, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, toolbox, double-decker equipment, double-decker equipment with beam, disc brake, EBS, 13 pairs of lashing rings embedded in the floor, KRONE axles, axle cap KM counter (KM reading read!), spare wheel holder, side walls inside with keyhole plates, certificate for load securing according to EN 12642 Code XL Djdsydp Ukepfx Ac Nokh

Condition: used, mileage: 208,000 km, power: 331 kW (450.03 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, = Additional options and accessories = - Air horn - Disc brakes - High Beams - Immobilizer - Lift Axle - PTO - Radio - Sleeping cabin - Speed limiter - Sper = Remarks = Scania G450, 2015, 208000 km, Euro 6, 8x4, Hvidtved Larsen FlexVac - Dry dust vacuum cleaner = More information = Dodjx Npw Dspfx Ac Nekh Front axle 1: Steering Front axle 2: Double wheels Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering GVW: 32.000 kg Make of bodywork: Hvidtved Larsen Flex Vac Tipper: Back = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PALLET SANDERS (€2000) Next maintenance due at 296 operating hours. This machine enables the use of both loose 3mm pellets and block dry ice. Condition: As good as new, supplied with a 1-year warranty. Includes hoses and nozzle set. The COLD JET machine is designed for industrial cleaning applications, suitable for both small and large-scale projects. A major benefit is its lack of new-generation electronics, ensuring reliability and ease of maintenance. Recognized as one of the most aggressive machines available, this unit is in excellent working condition. Cold Jet i3 Microclean & Dry Ice Press. Blasting set complete with: - COLD JET i3 Microclean (47 operating hours) - 1 x 20' blast hose - 1 x Cold Jet applicator - 1 x nozzle Price: €21,500 This is one of the top machines in the industry, featuring a fully mechanical design without electronics, which translates into high reliability and low maintenance costs. For inquiries or to schedule an inspection, please contact DrDryice. All machines are sold with a 1-year warranty. We also provide repair and maintenance services for all Cold Jet machines. New Cold Jet models available on request. Contact us for more information. Worldwide shipping offered. Related keywords: - Cold Jet dry ice machine for sale - Dry ice cleaning machine for sale - Dry ice blasting machine for sale - Dry ice blaster for sale - Buy dry ice blaster - Dry ice blasting equipment - Cold Jet Aero 30 for sale Dksdpsydpy Tofx Ac Noh - Cold Jet Aero 40FP for sale - Cold Jet Aero 40HP for sale - Cold Jet Aero 75 for sale - Cold Jet Aero 75 DX for sale - Used Cold Jet machines for sale - Dry ice blasting machines, Cold Jet various models - Maintenance and repair for Cold Jet dry ice machines - i3 Microclean - Dry ice press - NOZZITEC

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality Dedpoydnlhefx Ac Nskh - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and lifespan of electronics

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: BÜ177, Technical data: 1x Demag KBK 1 wall-mounted slewing crane SWL 250kg with Demag chain hoist 250kg Load capacity at full outreach 500kg / 0.5t load capacity Outreach: approx. 2m Total weight approx. 150kg incl. wall bracket Incl. pins, cable festoon, travel trolley, end cap, etc. Incl. Demag chain hoist NL 250kg (newer year of manufacture) Slewing range 300°, connection 400V 16A Crane is dismantled and immediately available Dkjdpfsw Hn Trjx Ac Nsh Item location is 75053 Gondelsheim Additional cranes available, load capacity 80–5000kg, please enquire See pictures Shipping by freight forwarder or collection by appointment only

Condition: used, used, good conditionnumber of tiers 14tier depth approx. 550 mmspace requirement approx. 1200 mm x 800 mm x 175 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Dodpfjwi Rn Dex Ac Nskh

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Dsdpfev Svcyex Ac Nskh

Condition: new, - NEW -- stable tubular frame construction- Extendable from 200 to 2000 mm andlockable to any desired width- 17 shelves on both sides possible- 4 polyamide castors, capacity 400 kg- Supporting tubes galvanizedTechnical specifications:Support pipe length: 650 mm- extended to: 1150 mmLight intermediate dimension of the tubes: 60 mmLength: 200 - 2000 mmDepth: 870 - 1180 mmHeight: 1855 mmItem No. 13-03000001 Dkjdpfx Acevwfvme Nsh

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Dodpovwfhisfx Ac Nekh

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Dodpevwfm Sofx Ac Njkh

Condition: new, The inexpensive shelf trolley Ecoflex isfor space-saving and gentle storageof painted workpieces. ByThe Ecoflex can also use its 4 swivel castorsTransport of workpieces can be stable tubular frame construction letscan be adjusted from 200 to 1500 h its 17 plastic-coatedSupport tubes on each side, the trolley canWeights up to 400 kg with a uniformabsorb distributed load. The pluggable onesSupport tubes can optionally be removedand can be reinserted on the backwill. When not in use, theAssemble shelf trolleys to save gth: 200 - 1500 mmDepth: 870 - 1180 mmHeight: 1855 mmSupport tube length: 650 mmClear intermediate dimension of the tubes: 70 mmLoad capacity: 400 kg Dkedpovwf Ehjfx Ac Njh

Condition: used, explosion proof used, good condition rotatable in the wall bracket Make Norka 58 watts Approval IP 65 Dkodovwf Atjpfx Ac Njh Number of tubes 1 Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition, as seen without guarantee and guarantee

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Dkjdpfx Aov Svc Hoc Njh

Year of construction: 1997, condition: good (used), functionality: fully functional, MOTAN dry air dryer Model MDE 40 Dodpfsxr Acvox Ac Njkh Power 1.3 kW MOTAN granulate container Model BE 60 Ltr. Additional heater Power 1.55 kW MOTAN material conveying unit Model HLS-02-1-A-000-0 This system has been tested for all functions and operates flawlessly!

Condition: excellent (used), functionality: fully functional, Dies for rain gutter and accessory production lines We offer PVC extrusion dies for: -production of rain gutter systems, including the Royal Dual Wall Gutter and Gutter 125, -corners, elbows, and other PVC accessories, -other structural and construction elements made of PVC. Available die types: -Royal Dual Wall Gutter die -Gutter 125 die -Other dies for accessories and gutter systems -Royal Dual Wall Gutter system Dsdpjydbl Uofx Ac Nskh Features: -Made of high-grade, wear-resistant tool steel -Precise shape forming -Adjustable die parameters to meet production requirements -Compatible with PVC granulation and extrusion lines NOTE: For detailed information about the dies and products, please contact us.

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SN072953, total length: 980 mm, total width: 850 mm, total height: 3,130 mm, input voltage: 400 V, nominal power: 3 kW (4.08 HP), 12 months warranty / 1800 operating hours Dodjydazzjpfx Ac Nekh

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Dkjdpfeyc T Apsx Ac Nsh Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C Dsdocmrxdepfx Ac Nekh burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Dkedpewf U Rusfx Ac Neh Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Dsdpfxew I A N As Ac Njkh

Condition: excellent (used), Year of construction: 2023, Ruwac Wet & Chip Vacuum Cleaner - Year of manufacture: 2023 - Fully functional Dodpeyc Hm Ujfx Ac Nekh - Hose & nozzles included Dimensions: LxWxH 1.2x0.7x1.4 meters / Weight approx. 120 kg Subject to errors and omissions.

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) Djdpfx Acox Uz Rto Njkh For further questions, feel free to contact us by phone.

Condition: used, 2K Adhesive System, 2-Component Dispensing System with Hand Applicator for 2-Component Adhesives Mayer & Mayer Type MMR R2020R VLOOP DG 2:1 PUB Serial No. 2021-001 Year of manufacture: 2021 VLOOP = Very LOw OutPut versions, approx. 30 – 210 ml/min Mix ratio: 2:1 (adjustable) Container size: Standard, 20 liter bucket Air pressure: 6 – 8 bar Air consumption: 80 –100 m³/h Power supply: 230V, 50 Hz - No open containers - Fully pneumatic drive - Continuous, precise mixing - Chain-driven gerotor metering pumps - Easy ratio adjustment - Compact and easy to handle - Simple operation and maintenance - All components/fittings made of stainless steel - Stainless steel transfer pumps - Stainless steel gear pumps - Double piston rams - Mobile aluminum profile unit on wheels - 8 meter hose package consisting of a 5 meter supply hose and 3 meter flexible whip hose lines - Includes GSMFG G200X-GUN (hand applicator) - Boom arm device for easier hose guidance Dkjdpfsx Urb Aox Ac Neh - Operating manual - Approx. 130 mixer tips (F-System) included All installed parts are sourced from reputable, high-quality suppliers such as Ingersoll Rand, Parker, VSE, Zenith, and others. Dimensions (W x H x D): 800 x 2000 x 2700 mm Weight: 332 kg Currently used silicone adhesive: Component (A) LOCTITE SI 5610 A (container empty) Component (B) LOCTITE SI 5610 B (container half full) The MM large dispensing systems are specifically optimized for the use of structural MMA adhesives from EBS, LLC, featuring a robust, durable, and maintenance-friendly design to ensure long-term, trouble-free, and consistent adhesive application. The system can be modified for dispensing a wide range of two-component adhesives such as polyurethanes, epoxies, methyl methacrylates, and others. BASIC FUNCTIONAL OVERVIEW: A pneumatically driven motor, powered solely by compressed air, drives the adhesive and activator gear pumps (= metering pumps) via a chain drive system. These metering pumps are continuously supplied by adhesive and activator transfer pumps, which are also air driven. This way, components A and B are kept separate but are pumped in the pre-set ratio through separate hose sets to a dispensing gun, where they are mixed at the gun outlet by a static mixer nozzle. As a result, the entire dispensing system requires little to no cleaning. The flow rate, which controls the dispensing speed, can be adjusted via the speed of the pneumatic drive motor.

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm Dedpfxsx T A Dxe Ac Nskh adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction