Used Dry Blower for sale (4,591)

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Gardner Denver Siemens, Elmo Rietschle Side channel blowers Side channel compressors -Type: G 200 2BH1800-7AH17 -Drive: 5.5 kW -Speed: 2900 rpm -Negative pressure: -300 300 mBar -Dimensions total: 495/480/H525 mm -Weight: 129 kg Gbsdpfx Agewncvwjbjg

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2900 RPM. Power supply 415V 3PH 50Hz Gbedpfx Agon Arbpebog Type: V870 50Hz Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Vibrations – vibratory finishing machine combined with a maize dryer Gjdpfx Asxz N Uqjgbebg

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Gsdpowbqrtsfx Agbebg Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Dimensions: 4000 x 2000 mm Gbjdsxvygtopfx Agbeg Extraction fan power: 4 kW

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, This is a 305GTP dry steam pressure cooker from the premium manufacturer Hobart, built in 2018. The medium-sized 305 GTP dry steam pressure cooker is often used in the communal catering sector. With its 3 x 1/1 GN racks, it cooks up to 650 portions per hour fresh and to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated steam has major advantages over hot air or combination steam in terms of the heat flux density that can be transferred. Shorter cooking times mean less loss of nutrients and healthy food. The appliance has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this appliance is €28,202 net. Our used appliance service for you - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Condition: Used, tested and fully functional Technical data: - External dimensions WxDxH: 600x785x950mm - Electrical connection: 400V 3NPE, 50 Hz, 26,7kW - SN: 97-0224-579 - Year of construction: 2018 - Portions: 650/h - Capacity: 3x 1/1 GN max. 65mm, 2x 1/1 GN max. 100mm, 1x 1/1 GN max. 200mm Further information: - Gentle, healthy cooking: Steaming, stewing or blanching - 3 different pressure levels 0 / 0.5 / 1 bar for individual adjustment to the food to be cooked - Extremely short cooking times - Individual temperature program (TP) 50 °C - 99 °C as standard - Electronically controlled program sequences - Built-in exhaust steam destruction with vapor condensation as standard SUITABLE FOODS - All types of vegetables - Pulses and rice - Pasta and dumplings - Meat that would otherwise be cooked - Fish and seafood - Desserts such as yeast dumplings or crèmes - and much more. Gbodpjun R R Tsfx Agbsg Shipping: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Godpfexy Ilfex Agbsbg Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Gbsdpfxeq Ebk He Agbsg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, empty load weight: 8,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,915 mm, suspension: air, tire size: 445/45 R 19.5, color: yellow, mileage: 526,675 km, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, double-deck system, double-deck system with beams, disc brakes, BPW axles, EBS, 13 pairs of recessed lashing rings in the floor, 4 pairs of ship securing brackets, axle cap kilometre counter (kilometres reading taken!), clothes rail box integrated at the rear in the floor, side walls inside with keyhole plates, load securing certificate according to EN 12642 Code XL. Gedpfx Aexyzaijgbobg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 Gbsdpfx Aoxu H Smegbeg -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Condition: used, Dry board sorting line ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Gbedpoxyixaefx Agbjg Electric cabinets renovated 2022

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 305GH-31, This is a dry steam fast cooker 305GTP from the premium manufacturer Hobart, built in 2018. The medium-sized dry steam fast cooker 305 GTP is often used in the communal catering sector. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and to the minute. The dry steam fast cooker is also equipped with a core temperature sensor. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated steam has major advantages over hot air or combination steam in terms of the heat flux density that can be transferred. Shorter cooking times mean less loss of nutrients and healthy food. The appliance has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this appliance is €29,497 net. Our used appliance service for you 6-month warranty on all electrical parts -High-quality brand appliances at fair prices Gedpfsupzdmox Agbjbg -Professional overhaul / inspection & professional cleaning -tested & fully functional - or money back -Shipping or self-collection flexibly selectable -Competent advice - before and after purchase -Provision of operating instructions, connection diagrams & spare parts -Testing in accordance with DGUV V3 Condition: Used, tested and fully functional Technical data: -Outer dimensions WxDxH: 600x785x950mm -Electrical connection: 400V 3NPE, 50 Hz, 26,7kW -SN: 97-0224-123 -Year of construction: 2018 -Portions: 650/h -Capacity: 3x 1/1 GN max. 65mm, 2x 1/1 GN max. 100mm, 1x 1/1 GN max. 200mm Further information: -Gentle, healthy cooking: Steaming, stewing or blanching -3 different pressure levels 0 / 0.5 / 1 bar for individual adjustment to the food to be cooked -Extremely short cooking times -Individual temperature program (TP) 50 °C - 99 °C as standard -Electronically controlled program sequences Built-in exhaust steam destruction with vapor condensation as standard SUITABLE FOODS -All types of vegetables -Pulses and rice -Pasta and dumplings -Meat that would otherwise be cooked -Fish and seafood -desserts such as yeast dumplings or crèmes -etc. Shipping: -Delivery or collection by arrangement -Worldwide shipping on request / Worldwide shipping on request -Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 Gjdpfx Aov Tbfiogbebg In Production UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS Heating unit Sheet separating unit Pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: m/min. 70 Size: 102mm x 116mm min 30 x 28 cm speed up to 70 m/min The machine is functional, operational, ready to work.

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for rough process pumps Dry vacuum pump ULVAC's unique approach to using latent heat in the pump body allows the LR / HR / UR series, performance even in the most stringent processes. ULVAC has continued its design efforts to maintain extremely uniform high temperature over all pump stages. Gbodpfx Agsd R U Etjbeg and this pump family is optimized for CVD and etching applications. Compatible with ULVAC's ECO-SHOCK system for additional energy savings Properties The LR-Series pump is designed for charging valve chambers and PVD processes. ULVAC's unique aluminium design allows for very uniform temperature distribution throughout the pump body: The ULVAC LR-Series pump is designed for applications that require a heated pump, heated gas lines and/or heated exhaust pipes Excellent helium pumping capacity Canning motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high level of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when these corrosive gases are exposed. (Series LR) Designed for process gases that produce powdered by-products, such as Si crystal growth furnaces Pre-pump for

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h Gedpfx Agexciw Isbebg 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Gbjdpfx Agsv Rmkxsbjg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Gedpoxgq I Nsfx Agbjbg Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Gedpjn Arayefx Agbebg Maximum Speed: 2855 RPM. Power supply 415V 3PH 50Hz Type: V870 50Hz Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades Gbodpfor H Sqyjx Agbsg - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: refurbished (used), Dry cleaner/ Friction cleaner Gbsdpfx Aexgtrqegbjg with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Centrifugal fan KASTRUP Fabric No. 27688/1 Year of construction approx. 1985 Volume flow approx. 4000 m3/h Intake pipe Ø 250 mm Exhaust air connection 400 x 120 mm Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition Gjdpfx Agedz Sqwobobg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Gbsdjxgttzspfx Agbjg Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm - Sturdy metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg Gedjr H Sqvjpfx Agbjbg very good condition, only test run completed

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Gbjdexgq Sbopfx Agbjg Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Godpfx Aexcitvjgbebg Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition