Used Drum Rotary Dryer for sale (8,181)

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Lrodpfx Adeyanu Ij Neg

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Ledjg Ngmxjpfx Ad Njrg

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation Lredpjhmzkbofx Ad Nog Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- Lsdpfxermulvj Ad Njrg 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Year of construction: 1999, condition: used, table length mm table width mm table load t Lrodpfx Aegxqvzed Nog plate width 2980 mm plate depth 3000 mm plate height 1400 mm total power requirement 11 kW weight of the machine ca. t required space m

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Lodpfxsx Dbkcj Ad Nerg This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: good (used), Rotary Table Surface Grinding Machine ARTER A3 - 16 - Max. grinding diameter: 450 mm - Grinding height: approx. 220 mm Lrodpfxsyc Hkys Ad Neg - Workpiece weight: approx. 250 kg - Automatic feeds - Coolant system - Machine enclosure - Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight 3500 kg Subject to errors and typos.

Condition: used, power: 13 kW (17.68 HP), gearing type: other, fuel type: diesel, overall weight: 1,700 kg, maximum load weight: 1,700 kg, number of seats: 1, first registration: 12/2006, Year of construction: 2006, driver cabin: other, Equipment: all wheel drive, German machine, condition see photos, more than Euro 10.000 invested, tandem vibratory roller, Ammann type AV 16-2, edge cutter, sprinkling front/rear and on the edge cutter, interval and continuous sprinkling, can be operated via the drive lever, ideal for asphalt and soil compaction, high lateral clearance for working over edges, Working width 880 mm, vibration force 14 KN-18 KN, Yannmar diesel engine, easily accessible thanks to large engine hood, 13 KW = 18 HP, low-maintenance engine, lighting, foldable roll-over protection, comfort seat with lap belt, rotating beacon prepared, clearly arranged controls, operating weight 1.580 kg, transport length 2,145 mm, transport height 2,250 mm If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Ledpfx Adovhp S Ho Njrg All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), The machine is ready for operation. Gate size: 110 cm height and 97 cm width. Ledpfoycx Hmsx Ad Njrg

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW Lsdpfx Adsubbryj Nsrg - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, color: other, Year of construction: 2007, operating hours: 7,205 h, GVW: 12.700 kg Make of engine: Duetz CE mark: yes Serial number: 101582511260 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Ledpfx Ajycvi Eed Norg Discover our wide range of reliable machines.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, machine/vehicle number: C0124000243, volume flow: 250 m³/h, power: 7 kW (9.52 HP), input voltage: 400 V, rotational speed (max.): 1,395 rpm, Rotary vane vacuum pump. In use until January 2025. Maintenance was carried out every 6 months. Last maintenance on June 13, 2024. Ledjvz Almjpfx Ad Nerg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 100,000 h, functionality: fully functional, machine/vehicle number: C0107000822, volume flow: 250 m³/h, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,470 rpm, Rotary vane vacuum pump. In use until January 2025. Maintenance was carried out every 6 months. Last maintenance on June 13, 2024. Lrjdpfx Asvz Ahbed Neg

Condition: used, axle configuration: 3 axles, first registration: 12/2013, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2013, Equipment: ABS, Reference size: 385/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 33,800 kg Gross vehicle weight: 41,000 kg Body manufacturer: Krone Damages: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately operational. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details Lrjdpfx Adsycr Dfe Njg - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: used, axle configuration: 3 axles, first registration: 11/2004, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 50 %, color: green, Year of construction: 2004, Ref. size: 385/65R22.5 Rear axle 1: Tyre tread: 50%; Reduction: single reduction Rear axle 2: Tyre tread: 30%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Ledpfx Asycq Agsd Nerg Unladen weight: 8,000 kg Payload: 34,000 kg Gross vehicle weight (GVW): 42,000 kg Body brand: OTHER Damages: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet current requirements, and comply with our industry's high standards. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Lsdpfxjlnanwj Ad Norg

Year of construction: 2021, condition: like new (used), Deburring machine in as-new condition Type: VKK 200 Lrodpfjyabqvox Ad Nog Capacity: 200 liters Year of manufacture: 2021 Including deburring sand

Year of construction: 2025, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. Lrjdjyaarfjpfx Ad Njg The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Lrodpfx Aoxz Al Ned Nsg Power: 0.81 kW

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SG460S 400V Metal Drum Grinder – Advanced Through-Feed Grinding Machine The CORMAK SG460S 400V metal drum grinder is an advanced through-feed machine designed for precise grinding of metal components. With a grinding drum and a working width of 460 mm, this model is ideal for serial production and facilities that require high-quality surface finishing. It is especially effective for processing small parts after welding or laser cutting. Key Advantages of the Machine Lsdpfx Aeycfzksd Norg 120 mm grinding drum ensures even grinding without risk of burning or scratching Conveyor belt provides smooth transport of the workpiece and stable guidance under the grinding unit Adjustable feed speed from 0 to 4.0 m/min allows adapting the working pace to the material type Dust extraction system with a Ø100 mm outlet ensures efficient dust removal, improving working conditions and component longevity Robust industrial construction (148 kg) guarantees machine stability even during intensive use Design and Technology The SG460S model is designed for stability, precision, and durability. The main frame is made of steel, providing resistance to vibration and deformation. The main 3.0 kW motor drives the grinding drum at 2800 rpm, enabling effective removal of excess material and burrs even in hard steel grades. The 60 W feed motor works with a speed controller, allowing the operator to precisely control the grinding process. The large conveyor belt width of 465 mm enables processing wide elements in a single pass, minimizing operating time. Precision and Work Efficiency The machine provides precise control over the thickness of the processed workpiece in the range of 5 to 80 mm. The grinding belt speed of 14 m/s ensures high surface quality without burning effects. The drum diameter and working length (465 mm) translate into even contact pressure and a uniform final result. Standard Equipment 120 mm grinding drum Conveyor belt width 465 mm Main motor 3.0 kW Feed motor 60 W Dust outlet Ø100 mm Worktable height adjustment Optional Equipment Metal dust and chip extraction system Grinding belts of various grit sizes Automatic material feeding system Technical Specifications Main motor power: 3.0 kW Voltage: 400 V Grinding drum speed: 2800 rpm Grinding drum belt size: 2760 × 75 mm Conveyor belt size: 1120 × 450 mm Worktable size: 460 × 465 mm Dust outlet diameter: 100 mm Conveyor feed speed (variable): 0–4 m/min Max. workpiece height: 80 mm Min. workpiece height: 5 mm Max. workpiece width: 460 mm Grinding drum dimensions (Ø × length): 120 × 465 mm Feed motor power: 60 W Machine dimensions: 880 × 720 × 1230 mm Net weight: 148 kg

Condition: used, axle configuration: 2 axles, first registration: 03/2009, total length: 10,660 mm, total width: 2,550 mm, total height: 3,850 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 1,310 mm, Year of construction: 2009, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Ljdpfx Adeyccd Ae Nerg Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.500 kg Carrying capacity: 12.500 kg GVW: 18.000 kg Maintenance APK (MOT): tested until 05/2026 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Year of construction: 2016, condition: excellent (used), PIOVAN Dryer DPA20 (2016) Drying capacity: from 0.5 to 25 kg/h. Process (air) airflow for DPA20: 5 ÷ 10 m³/h. Drying hopper volume for DPA20: 20 dm³ (20 litres). Temperature range: 40-150 °C. Ljdpfx Adsxyi Dcj Nerg Dew point: standard down to -25 °C, with optional desiccant cartridge/tower down to -40 °C. Compressed air supply: oil-free, filtered air, pressure ~ 5-7 bar. Control features: airflow managed in 7 increments/levels, material database of ~50 materials pre-loaded.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Ledpfx Aex Uz Thjd Norg Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. Lrodpfx Adsx Uz I So Nog We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Year of construction: 1971, condition: excellent (used), Brand: Sun Mountain Type: FTM Year of construction: 1971 Lodpfjd Sdg Sex Ad Njrg Dimensions: approx. B 1,00 X 1,00 x H 1.50 m Weight: approx. 500 kg All information without guarantee. The machine is located in a very good condition. A demonstration of power is possible in our showroom at any time.