Used Drill for sale (4,831)

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel Dujdpfoy N D Hyox Aiwot - Spindle speeds via belt drive

Condition: used, Used machine Equipment and technical data: Precision drilling machine with AC power supply Stepless electronic speed control from 400 to 4500 rpm Drilling capacity in steel and grey cast iron: 13/15 mm Dodjy Ih Tnjpfx Aiwjut Drilling depth: 60 mm Drilling depth indicator with mm scale via quickly adjustable stop ring Drill head height adjustment smoothly regulated by gas pressure spring Motor: 0.5 kW Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Dedpfx Aijy Ih Tzswsut Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, Dodpfew Naabsx Aiwout triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Dsdpfxsy Ih Sko Aiwjut Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING LINE MACHINE OPD201001 Go! Spindle Motor 5.5 kW – ER32 (Manual) OPD201100 Go! Boring Unit – 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder OPD201900 Go! Seaway Packaging System Dodpey Nyypjfx Aiwsut OPD201831 GO! HMI – English Interface

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Dedpfsvn Sv Uox Aiweut Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Through-feed drilling machine Vitap Sigma 2TAS 4 vertical drilling units, each with two heads 2 frontal side spindles Spindle pitch: 32 mm Maximum workpiece length: 2500 mm, minimum: 240 mm Drilling depth up to 70 mm Pneumatic material clamps Year of manufacture: 2006 CE mark Machine weight: 1600 kg Djdpfx Aiey Idd Njwout Dimensions: 390x180x145 cm (H)

Condition: good (used), Automatic drill, drill, plate drill, row drill -Automatic drill: for advertising signs -Spindle mount: 12 mm (can be changed according to customer requirements) -Automatic drilling -Table size: 1200 x 1000 mm Djdpfxsddfhxe Aiweut -Spindle stroke: 200 mm -Speed: 2800 rpm -Feed: via gear -pneumatic workpiece clamping -Pneumatic workpiece ejection -Dimensions: 1360/1520/H2180 mm -Weight: 450 kg

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Width: 1,200 mm Height: 1,710 mm Dedpfx Aioy Nmffewjut Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7035.46 € 135.78 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Djdpfx Aioy H N A Iewout Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 8144.6 € 157.19 € 25 mm MK 3 280 mm 125 - 4000 (2 Stufen) U/min 0,9 / 1,45 kW M20 520 mm 820 mm 1900 mm 275 kg 125 mm 110 mm 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Duedpfx Aioy H N Auowst Digital drilling depth and speed display Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW Duodpfeuhhzhsx Aiwet weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Duodpsy Nltnsfx Aiwjt Good working order, tested As is Available immediately

Condition: used, Used olive drilling machine Electro-pneumatic control with foot pedal Duedpfxoxgp U Us Aiwet 7 stops left/right with scale Height adjustable with handwheel L/W/H: 3400 mm / 700 mm / 1800 mm Weight approx. 90 kg Without warranty

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm Dujdpfoxlqxfox Aiwst - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, High-speed radial drilling machine – Column drilling machine Donau Machine Tools DR23 Radial Drilling Machine Serial number: 2062-4 Operating voltage: 380 Volt, neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range: 58 – 1275 rpm Tapping function, arm reach 920 mm Machine lamp Dusdpfx Aijwybqqowst Base plate/table size approx. 1100 x 400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg Inspection under power possible by prior appointment. All technical data subject to change/errors excepted. Price on request Sale exclusively to EU countries only.

Condition: excellent (used), Capacity: 32 mm Spindle taper: MK-3 Duedpfx Aioy Nixzowet Spindle speeds: 9 steps between 104–1450 rpm Feed rate: 0.1/0.2 mm/rev Throat depth: 300 mm

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Column diameter: 145 mm Spindle stroke: 160 mm with automatic drilling feed Total power requirement: 1.3 kW Dusdpfsy H Dfwsx Aiwst Machine height: 1865 mm Weight approx. 470 kg

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Dedpfx Asywm A Hjiweut Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

Condition: new, Year of construction: 2024, functionality: fully functional, NEW MACHINE! CNC SCM Startech CN PLUS ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: Dodpfxsip Dh Is Aiwout - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. Dsdpfxjgq Dl Aj Aiwout To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 Dsdpfxsq Umcnj Aiwjut In good condition. With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Morbidelli P 200 Year 2019 ca 4 500 working hours 100% fully working condition , nice and clean machine. Still standing on it original please since first installation in 2019 here in Norway. Operated only by one operator since new in 2019. Duedpfxowuubfj Aiwot For all technical specification please read - clic on including pdf document. (at the end of this adversating, click download this document) Machine can be seen after an appointment . The machine will be disconnected in Mai 2026. You are very welcome. Rekman Maskin & Service - Service of cnc machines since 1986 -

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Dujdpfx Ajy Nb Tkjiwst Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.