Used Drill Grinding Machine for sale (65,437)

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Djdpfxjyx Hx Ds Aahjuw Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Dedpfozkwudsx Aahouw

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Duodoyfta Tspfx Aahow Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Dujdjx H Andjpfx Aahow Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Dedexq R Haspfx Aahouw Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dsdjxp R D Nspfx Aahouw Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 Duodpfxsyvvpto Aahew spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm Dujdowd Rlfopfx Aahow - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: used, Year of construction: 2022, width of the strips 150 mm band length 2000 mm turning speeds 1500x3000 U/min Duodpfxjzip Nds Aahew total power requirement 2,6/3,1 kW weight of the machine ca. 200 kg

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 220 mm tool adaptor MK 4 machine weight ab. 400 kg Dusdpfxszip I Ho Aahsw

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm Dujdpfxeyvvq Do Aahsw feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Code: 0431 Brand: GRIGGIO Model: GF 27 - CE Standard Multiple boring machine with 27 spindles for furniture, custom-made furniture, kitchens, joinery, panels, bathroom furniture and various – CE Standard Technical specifications: N° 27 quick-change spindles Centre-to-centre distance between each spindle 32 mm Total centre-to-centre distance between the first and last spindle 832 mm Max drilling depth 85 mm Dusdpfx Aaszipq Iehew Table dimensions 1050 x 380 mm Motor 2 Hp N°2 pneumatic workpiece clamps Squares on the worktable Drill bit holder Pneumatic head tilting from 0 to 90°, allowing drilling in any position Extension rods for stop holders Quick Dept Overall dimensions mm 1200 x 780 x 1300 h Weight kg 360

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Dusdjzinz Sepfx Aahew Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp Dujdpfx Aaezinzxjhew - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Djdpfx Aaoziny Iehouw Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Dodpfxjzkvucs Aahjuw Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Designation: IMI Installation dimensions: approx. 2000 × 1200 × 2300 mm Dusdpszim R Esfx Aahsw Weight: approx. 1500 kg

Condition: ready for operation (used), functionality: fully functional, grinding length: 800 mm, grinding width: 350 mm, Magnet, 800 x 350 mm. Dodpfxszimmmo Aahsuw

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Dedpfx Aozimhwjaheuw

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Dusdpfx Aajzimgyohew

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Bavelloni Gemy V10 vertical straight-line grinding machine with 10 spindles and a variable mitre function, in fully refurbished condition. The machine features an extended infeed and outfeed. Only original parts were used during the refurbishment. Duedpfozkumdjx Aahow

Condition: used, Year of construction: 2000, functionality: unexamined, grinding width: 600 mm, workpiece weight (max.): 650 kg, The Brand AS 6030 is a robust and precise surface grinding machine, ideal for use in tool and mold making, as well as in single-piece and series production. With a grinding area of 600 × 300 mm and a table load capacity of up to 650 kg, it is suitable for heavy workpieces and demanding grinding tasks. Control: Chevalier control system with a numerical display and axis control, suitable for automated grinding cycles and manual interventions. The massive cast iron body, precise guides, and stable spindle technology ensure excellent surface quality and dimensional accuracy. Year of manufacture 2000, well-maintained condition, immediately ready for use. Documentation available. Model AS 6030 Manufacturer Brand Werkzeugmaschinenfabrik AG Year of manufacture 2000 Grinding area 600 x 300 mm Table load capacity max. 650 kg Control Chevalier Grinding wheel Approx. Ø 300-350 mm Spindle drive Approx. 3.6 kW Guides Precision guides / linear guides Dressing system manual or CNC-controlled Coolant system available Dedozkua Rjpfx Aaheuw Weight Approx. 2,200 kg Condition used, well-maintained, fully functional

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: TTS10371, Our TT8500 is in very good condition and fully functional. It is equipped with an EPSON manipulator and is very well suited for pre-grinding operations such as with step drills, necking, relief grinding, chamfers, etc. The centerless processing also offers special advantages, especially regarding the concentricity of the tools to be produced. Dedew H Sguopfx Aahouw

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: Dodpfxeywtxbs Aahjuw ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, machine/vehicle number: 32396, overall weight: 1,000 kg, total length: 1,820 mm, total width: 1,300 mm, total height: 1,250 mm, Year of construction: 2023, Machine Data Dimensions (W × H × D): 1300 × 1820 × 1250 mm Weight: approx. 1000 kg Drive & Performance Main drive: 15 kW, continuous operation Connection power: 30 kVA Cutting Disc Diameter of cutting disc: up to Ø 508 mm / 20" Cutting disc mounting: Ø 32/40 mm Speed: continuously adjustable 1000–2800 / 1000–2400 min⁻¹ Processing Data Max. sample size: Ø 190 mm Feed rate: 0.001–50 mm/s Positioning accuracy of the Z-axis: 0.1 mm Djdpfszilwqox Aaheuw Axes X-axis (cross-section): 420 mm, automatic Y-axis (cross-section): 280 mm, automatic Z-axis (parallel cut): 200 mm, automatic (optional) Table Data Table size with Z-axis: 550 × 500 mm Table size without Z-axis: 700 × 500 mm T-slot width: 12 mm