Used Dresden for sale (144)

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 50 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 2,800 mm, workpiece width (max.): 1,000 mm, control type: CNC control, High-performance CNC drilling center KDT KD-610NHZ for six-sided machining of workpieces. Immediately available from stock. Upper and lower drilling units. Precise machining and high speed. Ideal for carcass furniture production. The machine can be inspected by appointment. Hedpoymz Alefx Ag Ijfg

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used Hfsdpfxoyluicj Ag Ijg General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: new, functionality: fully functional, machine/vehicle number: 22779852001, overall weight: 209 kg, operating pressure: 16 bar, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,900 rpm, The Wilo IL 125/145-15/2-S1 (article number 2171435) is a single dry-running pump designed for industrial use or large-scale building services (HVAC). Hfsdpfeykukksx Ag Iog

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm Hsdsyhhx Aopfx Ag Ijfg • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Perfecta PT10P, pile turner, year 2004, size 800 x 1,290 mm, pile height 1,400 mm, standard equipment. Hjdpfxox R R Rbj Ag Iofg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Bandall BA32-20-62 model BbB - Branding by Banding year 2019 band width 60mm max. product width 320 mm Hfodpevmphlsfx Ag Iog max. product height 200 mm external reel holder with double buffer PEM printer print register device stainless steel covers - suitable for food industry checked and cleaned by a certified Bandall service company

Condition: excellent (used), Year of construction: 2017, Manufacturer: Riedel Hfsdpfxot Da Tvj Ag Ieg Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a

Condition: good (used), Year of construction: 2018, Manufacturer: DS AUTOMOTION GmbH Machine type: Industrial truck Design: driverless transport vehicle (AGV) Year of construction: 2018 Hfedpfot Ebgtex Ag Isg Operating hours: 504 hrs Mileage: 870 km Condition: good (expert opinion by Dekra) Speed v min.: 0.1 m/s Speed v max.: 1.2 m/s Transport load: 1,200 kg Drive type: Servo geared motor, brushless Drive power: 2x 1.09 kW Operating modes: Automatic (control station) or manual operation (wired remote control) Power supply: Lithium ion battery 24 VDC (25.2 VDC) Make: Triathlon Battery capacity: 100 Ah Battery weight: 50 kg Area of use: closed room, max. 80% humidity Length FTS: 1,650 mm Width FTS: 990 mm Height FTS: 505 mm AGV ground clearance: 30 mm Max. length of transported goods: 2700 mm Max. width of transported goods: 1800 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Hfjdpfx Aoycwwdeg Ijg Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Hfedpfx Aeyazrtsg Ieg Loading and unloading stations

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: Hfedpewycatefx Ag Ieg - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2025, Seam welding Hfedsh Nu A Nspfx Ag Ieg

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, empty load weight: 1,000 kg, machine/vehicle number: 11m² Container Stand Classic-Linie, Equipment: lighting, External dimensions: 240 x 460 x 260 H Standard configuration description: • Roof/wall insulation PU – 40 mm • Sandwich panels – (RAL 7016) • Frame color – (RAL 7016) Hfodpfxor Db R Re Ag Iog • Floor – laminate • 1x exterior door 90 x 200 • 4x windows (sliding & fixed) • LED lighting (interior/exterior) • Electrical cabinet with circuit breaker • Power connection 32 A incl. sockets • Weight – 950 kg

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 machine for box production easy operation servo controlled quick job change suitable for corrugated boxes Hodox El N Ispfx Ag Iofg enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Condition: excellent (used), functionality: fully functional, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60 Model: OptiCon Type: AdvancedLineX60 Operating hours: 51,326 h (switch-on time from internal PLC) Year of manufacture: 2014 Technical specifications: Voltage: 230 V AC Frequency: 50/60 Hz Hodpfx Agjwlquis Ijfg Rated power: 800 VA Short-circuit breaking capacity: 15 kA Compressed air: 6 bar Laser class: 2 Protection class: IP20 Features: - 4M camera with T21 resolution and 42 x 42 mm field of view - Angled view - "Chameleon Colour" module - Extended inspection area in the X direction to 670 mm - 2D barcode reader from below - Software version: 5.3

Condition: used, H482042K, MPN 190 / MPN190, Schmitt-Kreiselpumpen GmbH centrifugal pump Hfedeq S Tzvjpfx Ag Ijg Model: H482042K Type: MPN 190 Condition: Used

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Model: AXi940b Lamp Operating Hours: Hfodswgm Easpfx Ag Ieg

Condition: excellent (used), Year of construction: 2004, operating hours: 7,850,000 h, functionality: fully functional, MB Bäuerle CAS38-4 Hodpfx Asxc Inrsg Isfg folding machine year 2004 standard equipment flat pile feeder 4 motorized buckles stream delivery good condition

Condition: excellent (used), Year of construction: 2006, Palamides Delta 502 banding delivery for folding machines year 2006 in good condition Hodpfxexvygye Ag Isfg

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 flat pile feeder 4 buckle plates noise reduction hoods Hfjdpfoh Ighhex Ag Ijg delivery conveyor belt

Condition: excellent (used), Year of construction: 2023, Hefter Systemform SF1500-Plus compact folder, year 2023. Max. format: SRA3. Speed up to 18,000/h. 6 folding types. Automatic setting. Paper 52–170 g/m² (parallel fold up to 230 g/m²). Pile feeder for max. 800 sheets. Delivery conveyor. Located in our stock. Immediately available. Very good condition. Hsdpfx Agsxvrx Is Isfg

Condition: good (used), Year of construction: 1976, Polygraph OM II Letter press machine good condition running in production Hfsdjtdcipjpfx Ag Iog avaiable immediately

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 20 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with Hjdpfx Aour N Dtsg Isfg orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery Hfjdpfx Asur N Aieg Ieg board battery" and joystick control for easy transportation. transportation.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Hsdpfou T N Efjx Ag Ijfg The machine is in very good condition.