Used Drawers for sale (956)

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Todpoxphn Ejfx Ab Dod Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: used, mileage: 778,811 km, power: 310 kW (421.48 HP), first registration: 12/2013, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 01/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, ACTROS 1842 LS Tractor Unit * Fully Spoilered * RETARDER * Air Conditioning * STREAMSPACE Driver's Cab * Vehicle Number for Customer Inquiries: 3754 * Engine Version Euro VI * Secondary Water Retarder * Air Suspension, Rear Axle * L-Driver's Cab StreamSpace, 2.30 m, 170 mm Tunnel * Air Conditioning * Rear Axle Differential Lock * Electronic Stability Program (ESP) * Fuel Tank 390 l, left, 650 x 700 x 1000 mm, aluminium * L-Driver's Cab * Electrically Operated Lifting Roof * Additional Hot Water Heating, Driver's Cab * Comfort Lower Bed * Side Skirts, Aerodynamic * Actros model * Cruise Control * Tire Pressure Monitoring System * Engine Brake, Standard System * Digital Tachograph, EC-compliant, RPM, ADR * Mercedes PowerShift 3 * Gearbox G 211-12/14.93-1.0 * Comfort Locking System * Central Locking System * External Transparent Sun Visor * Adjustable Air Deflectors with End Flaps * Reversing Alarm with Hazard Warning Integration * Comfort Air-sprung Driver’s Seat * Electronic Braking System with ABS and ASR * Weight Option 18.0 t (7.5/11.5) * Front Spring 7.5 t, Single Leaf * Engine OM 471, R6, 12.8 l, 310 kW (421 hp), 2100 Nm * AdBlue Tank 60 l, left * Pre-installation for Toll Collection System * Tubeless Tires, 315/70 R 22.5 Rear Axle * Tubeless Tires, 315/70 R 22.5 Front/Lead/Follower Axle * 24 V, 15-pin Trailer Socket * Over-windshield Storage Compartments * Drawers under Bed * Front Axle Stabilizer * Wheelbase 3700 mm * Electronic Air Supply Control Unit for Heating * Particulate Filter * Environmental Badge (Green) * Two-Seater Tsdpfx Abjqwu Rho Dod * Full Service History * 2/3 doors No liability for printing and typographical errors Sale to commercial customers only Errors and prior sale reserved* Changes, prior sale, and errors expressly reserved. The description is for identifying the vehicle and does not constitute a warranty in the legal sense. The contractual description at the time of sale is binding. * TOP SERVICE + QUALITY * We can gladly offer you a LEASING-FINANCING-INSTALLMENT PURCHASE proposal * Warranty insurance available on request through the insurer * TÜV / UVV tail lift / tachograph test and installation of OBU device through our onsite partners * 30 day export registration plates * All export documents can be provided but must be individually requested * Toll arrangements for Toll-Collect can be booked onsite * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Condition: used, Year of construction: 2003, operating hours: 2,857 h, Steering: skid steer Serial number: cat00226p5fz0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21550 Specifications: 2003 model Certified to: 06/25 Todpfx Aoxpdlmob Ded 2857 hours Machine width w/ drawer: 169 cm 41 kW 2886 kg disappoint Tires (see pictures) Lever steering Climate Light Ready for delivery       Description: We have a Cat 226 Compact loader w/ bucket for sale. Everything works as it should according to the owner. It should be serviced. The engine counter has been replaced. Engine hours are approximately 2857. Ready for delivery Hours: 2857 Own weight: 2857 Year controlled until: 06/25 Kw: 41 Model: 226 Kompaktlaster m/ skuffe

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, total height: 2,280 mm, total width: 2,740 mm, total length: 7,399 mm, fork length: 140 mm, We offer a warehouse for the storage of quartz sinters in a size of 330 cm x 170 cm . Our company designs and manufactures warehouses for various types of slab materials. Technical parameters of the S140-12 sintered particleboard storage rack : Number of drawers - 12 Size of sheet - max 1800 X 3450 Load capacity of a single drawer - 1500 kg Width of loading space - 140 mm Total storage width - 2740 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - polyamide not destroying the floor Tsdpfx Aovf Im Rob Dod We export our products to over 30 countries worldwide. Please visit

Condition: used, mileage: 119,000 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,141 kg, first registration: 08/2019, next inspection (TÜV): 10/2027, loading space length: 1,740 mm, loading space height: 1,190 mm, emission class: euro6, color: white, number of seats: 2, Year of construction: 2019, total length: 4,408 mm, total width: 1,793 mm, total height: 1,823 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Well-maintained VW Caddy BMT, 2.0 L, 75 kW TDI, with optimal equipment for trades and commercial applications, ideal as a service or workshop vehicle. MOT valid until 10/27 Sortimo workshop shelving system installed in the cargo area (see details below) Tow bar with 1.5 t towing capacity Auxiliary heater with remote control Dual, adjustable seat heating Air conditioning with activated carbon filter Additional heater Driver assistance systems: - Rear parking distance control (visual and acoustic) - ACC Adaptive Cruise Control (distance control) - Cruise control with speed and distance regulation - Surround monitoring system (Front Assist) with City Emergency Braking - Fatigue detection - Hill start assist - Brake assist and multi-collision brake - ABS, ASR, ESP, EDL (electronic differential lock) - Automatic headlights - Automatic windshield wipers Audio system Composition Media (touchscreen): - Radio (FM/AM), CD player - USB, AUX-in, SD card, Bluetooth audio - App-Connect (Apple CarPlay and Android Auto) pre-installed, activation possible - Bluetooth hands-free system - Voice control pre-installed, activation possible - 4 speakers, good sound quality Leather multifunction steering wheel Multifunction display Plus / On-board computer 4 airbags (passenger airbag deactivatable): - Front airbags - Side airbags with head airbag unit Electric package: - Electric windows - Electrically adjustable and heated outside mirrors LED daytime running lights Fog lights and cornering lights Central locking with remote control Heated windshield washer nozzles Engine: 2.0 L – 75 kW TDI 5-speed manual transmission BlueMotion Technology Partition wall with window in load compartment Rear wing doors with glass, dark tint, 180° opening angle Right sliding door with glass, dark tint Wheelbase: 2682 mm Adjustable steering wheel Driver’s seat adjustable: seat height, backrest, lumbar support Passenger seat adjustable: backrest Fabric seat upholstery Carpet and rubber mats in the front Roof liner with storage shelf Air-conditioned and illuminated glove compartment Roof rail/roof rack preparation Commercial vehicle registration (VAN) Tire repair kit Thermal insulation glazing Cargo area equipment: Sortimo workshop shelving (similar to Aluca, Bott, Sortimo): Left side: shelving with compartments, storage bins, 2 drawers. Right side: shelving with compartment, storage bin, 3 drawers. Folding vise. Partition wall with window. Durable, plastic-coated plywood flooring. Tie-down rings and special lashing rail for load securing. Side walls partially covered with plastic panels. LED cargo area lighting. Ventilation (in and out). 2x 12V sockets. Cargo area dimensions (approx.): Length: - bottom: 174 cm - middle: 160 cm (due to the incline of the partition and rear doors) - top: 155 cm (...) Height: 119 cm Mounted tires: Winter tires 195/65R15 on steel rims, approx. 6 / 6 / 8 / 8 mm tread remaining Todpjxq Ev Nofx Ab Dod Additional tires: Summer tires 195/65R15 on steel rims, approx. 6 mm tread front and 5 mm rear Service history (as per leasing records): 01/21 at 29,175 km – Longlife service 02/22 at 52,455 km – Longlife service 02/23 at 68,207 km – Longlife service 01/24 at 89,036 km – Longlife service 02/25 at 106,767 km – Longlife service Oil change due soon Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2024, Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg. Tjdpfx Aoxq Egnjb Djd

Condition: used, mileage: 609,600 km, power: 330 kW (448.67 HP), first registration: 09/2018, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, differential lock, fog lights, fridge, soot filter, spoiler, traction control, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Leaf suspension - Bluetooth - Power brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - EBS (Electronic Braking System) - Electric windows - ESP (Electronic Stability Program) - Remote central locking Tjdpfsxq Ecpsx Ab Dod - Windshield - Enclosed cab - Speed limiter - Cab - Refrigerator / cooling drawer - Air suspension - Air-suspended seats - MX engine brake - Particulate filter - Radio/CD player - Radio/cassette player - Disc brakes - Sleeper cab - Hose assemblies - Side skirts - Sun visor - Stability control - Stationary air conditioning - Automatic heater - Toolbox - Central locking = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Drive Train Fuel tank: 950 liters Transmission Transmission: 12T2210, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Rear axle: Twin tires; Max. axle load: 11,500 kg; Suspension: Air suspension Dimensions Dimensions (L x W): 592 x 255 cm Weights Unladen weight: 7,742 kg Payload: 12,758 kg Gross vehicle weight (GVW): 20,500 kg Body Body brand: Traxon Identification Registration number: 07-BLG-7

Condition: used, mileage: 778,811 km, power: 310 kW (421.48 HP), first registration: 12/2013, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 01/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, ACTROS 1842 LS Tractor Unit * fully aerodynamic kit * RETARDER * Air conditioning * STREAMSPACE cab * Vehicle No. for customer inquiries: 3754 * Engine specification: Euro VI * Secondary water retarder * Air suspension, rear axle * L-cab StreamSpace, 2.30 m wide, 170 mm tunnel * Air conditioning * Rear axle differential lock * Electronic Stability Program (ESP) * Fuel tank 390 L, left side, 650 x 700 x 1000 mm, aluminum * L-cab * Electric sunroof * Auxiliary hot water heater, cab * Comfort bed, lower * Aerodynamic side panels * Actros * Cruise control Todjwm S Ugopfx Ab Djd * Tire pressure monitoring system * Standard engine brake * Digital tachograph, EC compliant, rev counter, ADR * Mercedes PowerShift 3 * Transmission G 211-12/14.93-1.0 * Comfort central locking system * Central locking with remote * Exterior sun visor, transparent * Adjustable air deflectors with end flaps * Reversing warning system with hazard flasher integration * Comfort driver's air-suspended seat * Electronic braking system with ABS and ASR * Gross weight variant 18.0 t (7.5/11.5) * Front spring 7.5 t, single-leaf * Engine OM 471, straight-6, 12.8L, 310 kW (421 HP), 2100 Nm * AdBlue tank 60 L, left * Preparation for toll recording system * Tubeless tires, 315/70 R 22.5 RA * Tubeless tires, 315/70 R 22.5 FA/FAL/NAL * Trailer socket 24V, 15-pin * Over-windscreen storage compartments * Drawers under bed * Front axle stabilizer * Wheelbase 3700 mm * Heating, electronic air supply unit * Particulate filter * Environmental badge (green) * Two-seater * Full service history * 2/3 doors No liability for typographical or printing errors. Sale exclusively to business customers. Subject to prior sale and changes. This description is for identification purposes and does not constitute a warranty in the legal sense. The description according to the sales contract is binding. * TOP SERVICE & QUALITY * We are happy to make you a LEASING - FINANCING - INSTALLMENT PURCHASE offer * Warranty insurance available on request with the insurer * TÜV / UVV LBW / Tachograph check and installation of OBU device possible through our local partners * Zoll (export) registration plates for 30 days * All export customs documents can be arranged - on request * Toll-Collect MAUT service can be booked in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website * Over 200 vehicles in stock at all times.

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm Todpjxn Tydofx Ab Dod L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: used, mileage: 7,500 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: other, axle configuration: 1 axle, first registration: 03/2025, emission class: euro6, color: grey, driver cabin: other, suspension: other, brakes: other, mast type: standard, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, traction control, Comfort Package Plus for driver and front passenger (includes: driver’s seat with adjustable lumbar support), COMFORT (includes: 7-inch instrument cluster with color display), CONNECTIVITY (includes: EASY LINK 8-inch with WiFi smartphone integration), SAFETY/ASSISTANCE SYSTEMS (includes: ESP + HSA hill start assist), LIGHT AND VISIBILITY (includes: light and rain sensor). OUR FINANCING EXAMPLE: Finance this vehicle for €249.00 per month. Price: €24,383; Down payment: €2,793; Net loan amount: €23,594; Effective annual interest rate: 6%; Fixed interest rate p.a.: 0%; Processing fee: 0; Term: 48 months; Gross loan amount: €24,897; 47 monthly installments: €249; Final installment: €13,194; Bank: RCI Banque S.A. Germany Branch. Tjdov Sh Smepfx Ab Djd Equipment highlights: Highland Grey, Comfort Package Plus for driver and front passenger (includes: driver’s seat with adjustable lumbar support, height-adjustable front passenger seat, heated driver and front passenger seats, center console with storage compartment), automatic climate control with navigation, plastic floor in cargo area, 360-degree parking assist, COMFORT (includes: 7-inch color instrument display, drawer, right-hand sliding door without window, solid partition, overhead storage above driver, electrically adjustable and heated exterior mirrors, rear parking assist, electric front windows, height and reach adjustable steering wheel), CONNECTIVITY (includes: EASY LINK 8-inch with WiFi smartphone integration), SAFETY/ASSISTANCE SYSTEMS (includes: ESP + HSA hill start assist, driver drowsiness warning, emergency brake assist, lane departure warning), LIGHT AND VISIBILITY (includes: light and rain sensor). Trade license required | Only available in conjunction with financing or leasing from Mobilize Financial Services. INCLUDE: delivery inspection, transport costs, vehicle under manufacturer’s warranty, new general inspection and emissions test (TÜV/AU), manufacturer’s warranty...Subject to change, prior sale, and errors.

Condition: used, mileage: 211,736 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, overall weight: 20,500 kg, gearing type: automatic, Equipment: air conditioning, parking heater, soot filter, Vehicle number: 253199 1 owner, accident-free, full service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Auxiliary heater ASSISTANCE SYSTEMS Tsdpowk Ab Ejfx Ab Dsd * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) INTERIOR * Air conditioning * Left-hand drive * Driver seat armrest * Black seat belts LIGHT & VISIBILITY * LED headlights OTHER EQUIPMENT * ZF Intarder * 120 A alternator Additional features ----Paint/Color---- Cab color H3329GREE * Chassis color: Gray ----- Tires / Wheels ----- F1, 385/55R22.5MI XMF 160/000 K Steering BB72-2 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * Steel disc wheels, silver gray ----- Equipment / Special equipment ----- Front axle 8T * Rear axle 13T * MX-13 engine, 355kW/483 HP * Automated TraXon transmission, 12 speeds * Technically permitted gross chassis weight max. 20,500 kg * AdBlue tank 90l on left fender * Emission class Euro 6 * Mechanical differential lock * Wheelbase 3.80m / rear overhang 0.99m * Steering wheel, leather, black * Glass roof hatch, electric operation * Driver's seat: Luxury Air * Pneumatic tool preparation * Passenger seat: Basic * Passenger seat fixed * Door trim: loosely woven fabric * Interior trim color scheme: Dark Sand * Cab interior trim Delta black * Water auxiliary heater * Timer for auxiliary heater * Roof hatch, electric operation * Cold foam mattress for lower bunk * Upper bunk * Lower bunk with 65-liter drawer * Automatic cab climate control * Safety net at both bunks * Curtains with partition curtain * Cool box or refrigerator * Three ignition keys * Auxiliary power supply: standard + 2x 40A * PL lights in cab roof lining * ECAS remote control with extended functions * Water auxiliary heater * Auxiliary heater with waste heat pump and timer * Single front axle * Single rear axle * Rear axle SR1344 * First steering rod height 84.5 mm * Camber adjustment for normal road conditions * First steering rod length 270 * With ECAS air suspension * Stabilink rear axle suspension * Parabolic front suspension * One driving height position, standard height * Front axle with leaf springs * Rear axle with air suspension * 4x2E * Type FT * Vehicle series XFH * Motor project version 10.673/74 * Fully Built Up (FBU) manufacturing * Cab width 2550 mm * Air filter with single element * Top air intake * Dust shield * Heated fuel pre-filter * Drive rear axle with disc brakes * Standard compressor pipe * Parking brake actuator with test position * Cab type U249 * Cab suspension mechanical * Cab - Super Space Cab * Super Space Cab * Convex main mirror * External sun visor, green translucent * Headlight beam for right-hand traffic * Fog lights * Skylights * Longitudinal member height 260 mm * Right chassis side clear, 1600 mm * Catwalk with step, standard * Steering with Euro certificate * Splash protection * Work lights, LED * Battery box in rear overhang * Aluminum air tanks * AdBlue tank 90 l, on left fender * Aluminum fuel tank, height 620 mm * EAS unit on right side * Tail lights with LEDs * Exhaust pipe horizontal, low * Front underrun protection 365 mm below frame * Idle shutoff automatic, 5 minutes * Rear axle ratio 2.38 * Premium sound system with 6 speakers * Speaker under lower bunk * Adaptive cruise control with F

Year of construction: 1985, condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) The machine is in good condition and is sold for lack of space. The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Todpoccl N Sefx Ab Ded Travel Y 1000mm Stations 16 Machining up to 6mm aluminum Machining up to 6mm steel Machining up to 3mm CNS

Condition: new, machine/vehicle number: 59ade5d1599dcdee29033ac46, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Suspension bar for aluminum ramps across the entire width Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle with anti-spray flaps behind each axle Pair of ferry eyes, marked yellow 1 Spare wheel holder for 1 e-wheel, with wheel mounting kit 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Container lock, 4 pairs of locks embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, foremost position recessed as hinged lock Tsdpfx Abold Ihlo Ded 10 pairs of stake pockets embedded in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets embedded in the center of the floor, 70 x 40 mm inside dimensions 2 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 rdnung: Position 2 and 4 according to Fliegl data sheet 20 stanchions, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them Storage space for aluminum ramps, ramps can be inserted from the rear 3 pairs of folding eyelets 10 tons in the outer frame (1x in front of the bulkhead and 2x in the rear area). Axles + suspension SAF disk brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage 2 ride heights, adjustable via hand knob, 1 x for semi-mounted height 980 mm 1 x for semi-mounted height 1100 mm (Note! Vehicle with inclined position) Brake system 2-line compressed air brake system Colored cable routing for easy servicing. Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting & lowering valve 2 ride heights, adjustable via hand knob, 1 x for fifth wheel height 980 mm 1 x for fifth wheel height 1100 mm (Note! Observe overall height, excess height at customer risk) Driving height in conjunction with lift axle, when the lift axle is raised, the total loading or semitrailer height increases by 50 mm (with Mega Flex only with low driving height or semitrailer height) Vehicle driving stability system Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Stee

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, color: white, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FAN XG 480 Swing-Board with Tail Lift Climate Package Chassis configuration front: Floor plate XG cab Rear-view camera LED daytime running lights Fixed cab entry Air-suspended cab Laminated glass with sun protection film Central locking, 3 keys, 2 remote controls Windshield with sun protection film Headlamp washer system Headlights with height adjustment DAF Corner View LED headlights, cornering and fog lights Auxiliary heater with waste heat pump and timer Interior trim color: Exclusive Leather steering wheel Roof hatch with electric operation Integrated parking air conditioning Driver’s seat: Luxury Air Co-driver's seat: Kino Table fabric cover Driver’s seat with swivel base Tedpfxexqkr Ae Ab Dsd Xtra Comfort mattress, adjustable under bunk Automatic cab climate control Fridge and drawer Armrests on both sides of the driver’s seat Storage compartment with drawer in center console Auxiliary power supply: Standard + 2x 40 A ECAS remote control with extended functions Adaptive cruise control with FCW and AEBS-3 Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, Version G2V2 DAF Infotainment Exclusive prep. Luxury speakers Antennae: DAB-prepped Radio, 2x Mobile, GNSS-Extra: CB Hill start assist DAF Side and Turn Assist DAF Drowsiness Detection Reversing warning system Load limiter 11.5 t Axle load ratio 11.5/7.5 Manual tail lift control Tail lift Rear: 20.00 t, air suspension, SR1344 Rear axle capacity 13.00 t Trailing axle load 8.0 t Front: 8.00 t, air suspension, 161 N Tire pressure monitoring system F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB Idle shutdown automation Automated transmission, TraXon, 12-speed Automated gearbox with manual shift – full version Traction control (ASR) 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 Emission standard Euro 6 Rear axle ratio 2.38 Mechanical differential lock Traction aid 15.0 t MX-13 engine, 355 kW/483 hp, cab emblem: 480 Drive rear axle with disc brakes ZF Intarder Front underrun protection Wheelbase 5.05 m / rear overhang 2.90 m LED rear lights EAS unit right, horizontal with 75-litre AdBlue tank left Longitudinal members 310/7.0 mm, with internal reinforcement front/rear 620-litre aluminium fuel tank left, height 620 mm Pneumatic coupling for trailer, turntable Cross member D137 + Ringfeder coupling D137 Electrical trailer connection, 24 V / 15-pin Additional chassis lighting connector Body mounting method: BAM 1, bracket type B Side marker lights Generator 150 A, batteries 2 x 210 Ah AGM Warranty Plus-Drivetrain-3 years-300,000 km Body: 1. ZIKUN Swing Board I body Internal through-loading length: 7,520 mm Loading length: 7,670 mm + 30 mm tail lift seal = 7,700 mm Clear loading width 2,480 mm (rear portal) Loading width inside: 2,480 mm External width: 2,550 mm Internal clear loading height: 2,200 mm Overall height: approx. 3,663 mm Floor made of 24 mm thick vehicle construction panels Front wall enclosed up to the roof Side walls: ZIKUN folding swing system. By folding down the lower side wall, the upper side wall is mechanically swung onto the roof. Important: When opened, the lower side wall stands vertically on the vehicle. Flat, smooth entry at the front wall without intrusive stanchions. Upper side wall parts made from special aluminum composite panels, 25 mm thick. Central locking on the side wall, left and right. Fold-down upper wall parts do not protrude beyond the d

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate Tedsw Sgnkopfx Ab Dod - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead Tjdpek Unitofx Ab Djd recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, color: white, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FAN XF 480 NGD Multi-Changer 1020-1320 * CRYSTAL WHITE * Chassis front: Aero floor plate * Air-suspended cab * Sleeper High Cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * Two LED headlights for rear cab wall * LED skylights * DAF Corner View * LED headlights and fog lights * DAF digital vision system * Reversing camera * Grab handle and trim: black, side walls: cab color * LED daytime running lights * Adjustable short roof spoiler, Sleeper High Cab * Electrically operated roof hatch * Integrated parking air conditioning * Driver’s seat: Luxury Air * Passenger seat: Cinema & table, fabric upholstery * Door trim: loosely woven fabric * Xtra Comfort mattress for lower bunk * Automatic cab climate control * Safety net on both bunks * Curtains with separating curtain * Fridge and drawer * Armrests on both sides of the driver’s seat * Dashboard design: Plateau * ECAS remote control with extended functions * Interior trim color: Luxury * Central storage compartment * Roller blind driver’s side * Dashboard table * LED interior lighting * Auxiliary heater with thermal pump and timer * Pollen filter * Wireless charger * PACCAR Connect with navigation * Antennae: radio, 2x mobile, GNSS, extra: CB * FMS connector, extended and prepared * Infotainment including DAF Truck Navigation * Speakers: Luxury * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Digital tachograph, Stoneridge 1C, Version G2V2 * Toll pre-installation * Speed limiter setting: 90 km/h * Driver Performance Assistant * Reversing warning system * Lane change warning system * Start assist * DAF Side and Turn Assist * Electronic Stability Control (ESC) * Speed limit recognition * DAF Drowsiness Detection * Standard immobilizer * Compliant with UN regulations R155 and R156 * Alcohol interlock preparation * Axle load monitoring * Front: 8.00 t, air suspension, 161 N * Rear axle capacity 13.00 t * Load limiter 11.5 t * Tag axle load 8.0 t * Axle load distribution 11.5/7.5 * Manual lift axle control * Air suspension front: medium * Lift axle * Rear: 20.00 t, air suspension, SR1344 * Front axle 1: 8,000 kg, load index 156 * Rear axle 1: 11,600 kg, load index 145 * Rear axle 2: 7,500 kg, load index 154 * R1, 315/60R22.5 GO KMAXD2 152/148 * Silver-grey wheel covers * Goodyear * Tire pressure monitoring system * Front axle(s): 315/60 R22.5 * Driven rear axle(s): 315/60 R22.5 * 2nd driven rear/tag axle: 315/60 R22.5 * Steel disc wheels, silver-grey * F1, 315/60R22.5 GO KMAXS2 154/148 * R2, 315/60R22.5 GO KMAXS2 154/148 * RR, not applicable * Mechanical differential lock * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 Tjdjw Sb H Uepfx Ab Dsd * MX-13 engine, 355kW/483hp, cab badge: 480 * Shunting mode * Emission standard Euro 6 * Eco-Fuel * Idle shut-off automatic, 5 minutes * Automated gearbox, TraXon, 12 speeds * Automated gearbox with manual override – full version * Rear axle ratio 2.21 * Traction control (ASR) * OBD-E engine H6, fuel B7 * Traction assistance 13.0 t * 2-cylinder compressor without clutch * MX engine brake * Driven rear axle with disc brakes * Pneumatic control for parking brake * Wheelbase 4.80 m / rear overhang 1.62 m * Four LED work lights * EAS unit right, vertical, plus 45-litre AdBlue tank left * Longitudinal ...

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Tjdpfxei Ri Szs Ab Djd Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: used, machine/vehicle number: 41b5b53ab0b527fda1f0f26fe, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2020, tire size: 445/45 r19,5, Further information The pictures are archive pictures, the vehicle may still be in use! Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins PRO SLIDE, additional front skid plate for protection when saddling up Slightly angled outer frame with Load-Lock profile for attaching tensioning straps Note! To attach the straps in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Note: Free support leg corner dimension or free swing radius to the rear approx. 1930 mm 1 pair of gear support legs at the rear, with straight lower section and single-sided operation in FR right Pull-out ladder at the rear Side door retainer Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray flaps behind each axle Heavy blocker rear transverse bumper + side roller bumpers Heavy-duty pallet stop bolted on both sides, approx. 15 - 20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15 - 20 mm Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Storage compartment for 16 insertable slats, one-sided in FR-left, below loading area Axles+suspension BPW disk brake axles with 370 mm disk diameter, Axle/chassis laser-measured Reduction in tire wear and fuel consumption Tsdpfx Abjqhiyxs Ded Air suspension Rear loading height approx. 1200 mm when raised (air suspension on truck lowered to approx. 910 mm semi-mounted height) without lift axle Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-applied parking brake Duomatic connection at the front, without connecting cable EBS make Wabco-E, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Wabco ramp starting aid, TailGUARD with 3 ultrasonic sensors at the rear of the vehicle Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable Reversing camera system with color flat screen monitor, with wireless connection to the screen, screen with suction cup mount and power supply via 24 volt vehicle socket Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Rear area with heavy-duty floor approx. 1800 mm long In the rear area, steel/ checker plate flooring is fitted over a length of approx. 300 mm (protrudes slightly). Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, Crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. 3 pairs of stanchion positions Insertion slats Wooden slats Additional row of aluminum V-slats Vario steel slats, in conj

Condition: new, machine/vehicle number: 562ca26c733cc91276e95b716, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Todpfx Aei Riywjb Ded Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, machine/vehicle number: cd0062ee491e6794168ccb01a, empty load weight: 8 kg, maximum load weight: 26 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r 19,5, Further information Chassis semi-trailer In proven HANGLER welded construction made of high-quality steel with UP-welded side members tapered towards the front. Frame neck height 120 mm, with double center bar. Z-profile cross members punched through on the side member with floor panels (larger spacing) and with welded special side frame.2 kingpins to DIN 74080, replaceable, with grinding plate beveled to the front, made of high-quality sheet steel. EC front turning radius 2,040 mm. Sliding plate continuously welded from saddle plate to front plate *inside* 18 pairs of lashing eyes embedded in the outer frame, 2.5 tons each 8 pairs of lashing eyes embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side collision protection Plastic mudguards with splash protection mats Underride guard Impact protection at the rear Spare wheel holder for 1 e-wheel, with wheel mounting kit 3 Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Aluminum ladder 3 300 mm, loose Pair of recessed stanchion pockets Piece of stanchions Storage compartment for plug-in slats on one side in FR left, below loading area Storage compartment for drop sides underneath the cargo bed, open, if technically possible Coil trough/inclined loading device Coil trough 8,000 mm long with cover and rubber pad. Cover 35 mm. With inclined loading bars and supports suitable for FR 80/80/4, complete stanchions 80/80 incl. lower reinforcement supplied Hydraulic sloping loading device with 4 crossbars:Hydraulic supply via tractor unit by means of 2-pipe pump system (forward/return) with 2-fold Faster coupling mounted on bulkhead (hoses are connected to Faster coupling from below).Sloping loading bars (FR 180x100x8 mm) with integrated extension part can be locked in height. Multi-stage hydraulic cylinders, each beam with cardanic suspension Incl. outriggers - adjustable - with bolt safety device underneath the loading area5-fold control block for operating the sloping loading device and for folding device sliding roof.1 set of boiler floor holder with height-adjustable support bolts for different boiler floor diameters, incl. shelf.1 piece of stop protection for sloping plate - for securing to the front! Axles + suspension SAF disc brake axles Offset axle spacing mm Air suspension Brake system 2-line compressed air brake system Aluminum air reservoir Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Wabco, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle - driving stability system Wheels and tires 435/50 R 19.5, manufacturer's choice Factory silver steel rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 additional LED work light(s) at the rear, switched via reversing light 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, detachable with plug 1 rotating beacon with holder, detachable Floor Tedpfx Abji Riw Hj Dod Screen printing plates approx. 3

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable Tsdpsi Riytjfx Ab Ded 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: d9c951d746f03c05bc5470f89, empty load weight: 5 kg, maximum load weight: 29,045 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis saddle forwarding Todji Ri R Djpfx Ab Ded Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Vario stanchion system 4 pairs embedded in loading area, can be pushed together to 2 100 mm and extended to approx. 3 500 mm for loading. Stanchions can be locked every 100 mm on an internal width of 2 100 mm to 3 000 mm, 4 pairs of divisible stanchions 600 mm + 1 200 mm, total height 1 800 mm removable. With an internal stanchion width from approx. 2 350 mm, excess width. Vario end walls Floor prepared for inserting 3 end walls. 4 x 5 pairs of Vario stanchion pockets for insertable end walls (front and rear) and 1 x 3 pairs in the middle for transporting 2 x 5,000 mm or 2 x 6,000 mm construction steel mats. 2 Vario end walls, each consisting of 1 pair of plug-in stanchions and 1 top crossbeam approx. 2200 mm wide. Cross beams can be extended by 220 mm on both sides, with lashing hole for tensioning. 1900 mm high Vario bulkhead, can be converted to 1300 mm or 700 mm high. 4 stanchion pockets embedded in the center of the floor for 80 x 80 mm stanchions 1 pair of supports at the bottom for Vario bulkhead at the front 1 pair of lower supports for rear Vario bulkhead Slightly slanted outer frame with Load-Lock profile for lashing strap attachment 14 pairs of lashing eyes additionally embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Wheel chocks with holder Aluminium side collision protection Galvanized steel underride guard Quarter-shell mudguards in front of and behind axle unit with anti-spray flaps on last axle only Impact protection at the rear 8 construction steel winches with wire rope and counter hooks, 4 x left and 4 x right with rope feed-through through the outer frame, 1 removable slip-on gearbox for construction steel winches - supplied loose (without bracket on the frame) 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be to

Condition: new, machine/vehicle number: 6650f95fd39bb5625662ee336, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Tjdji Riwxepfx Ab Djd 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Condition: new, machine/vehicle number: 745183e095a8a43501797c66c, axle configuration: 2 axles, first registration: 12/2022, tire size: -, Further information Tandem platform trailer Type TPS 180 Standard building material with forklift bracket Weights and dimensions: Total weight: 18000 kg Unladen weight (basic version) approx.: 4600 kg +/- construction tolerance Payload approx.: 13400 kg Drawbar load: 1000 kg Overall length approx.: 9925 mm Overall width max.: 2550 mm Overall height approx.: 3150 mm Interior length approx.: 7750 mm Interior width approx.: 2480 mm Platform height approx.: 1200 mm Towing height approx.: 380 mm Towbar length approx.: 2150 mm Chassis central axle trailer Fine-grained steel welded construction Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Tedondwdhepfx Ab Dsd Quarter-shell mudguards 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Please note! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1900 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle) The axles are shifted backwards by the forklift bracket, observe load distribution when driving without forklift. Customer risk! Note! Forklift bracket! Carrying a forklift truck can lead to a considerable reduction in the drawbar load. Front counterweight required! On wet and slippery roads, an additional ballast weight provided by the customer or a load of at least 2 tons at the front of the bulkhead is required; the speed must then be reduced and adapted to the roads and driving behavior. The truck must always be secured with chains while driving. The distance between the lift mast and the body must be max. 45 mm or the vertical forklift tines must be in contact with the forklift pockets at the end. We assume that the towing vehicle has no steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Towing equipment for central axle trailers Towing bar with tested 50 mm towing eye, forwarding version (not suitable for trucks with tail lift) Towbar under-coupler Folding bracket with spring support on the drawbar, for guiding the connecting cable to the truck Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension with lift & lower valve 1st axle automatic lift axle with proximity switch, for lift axle (only for driving with forklift) Wheels and tires 385 / 65 R 22,5 according to manufacturer's choice Steel rims factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Duomatic connection at the front, with connecting cable to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, LED multi-chamber lights, amber LED lighting on the side, LED lic