Used Double Spindle for sale (23,072)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4150x1200x1650 mm Fgedpfovz Ezwox Ab Tsk Weight 450 kg Total power requirement 1,5 kw

Condition: good (used), Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack -Lifting jack: Spindle jack -Type: unfortunately without a type designation Fgedpfx Asx Eih Esb Tek -Height: 330 to 545 mm -Quantity: 1x lifting jack available -Dimensions: 240/140/H330 mm -Weight: 8.6 kg

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm Fgodpfx Ajg E Th Ssb Tjk No of Top Units: 2 Lateral horizontal groups: yes

Condition: ready for operation (used), Fanuc A06B-1401-B105 AC spindle motor, serial number: C194SB3A0, used, in good preserved condition, 100% functional, scope of delivery as per photos. Fgedpfxox Eghce Ab Tsk

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler Fgsdowx Nnbepfx Ab Tek spindle diameter: 30 mm speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm machine depth: 1400mm weight: 1000 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical College Inventory Technical Data: - Year of manufacture: 1992, Machine No. 92 160 3273 - Center height: 160 mm - Center distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feeds from 0.02 to 0.63 mm/rev - Thread cutting options: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 8 mm - Weight approx. 680 kg - Spindle brake can be engaged - Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Features: - 3-axis DRO by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction reversal, - Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments - 160 mm three-jaw chuck (with 1 set of jaws) - Quick-change tool post with 4 tool holders - Bed stop - Electronic spindle guard - Rear splash guard - Coolant system - Operating manual, spare parts diagram About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All carriage slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for finishes similar to grinding. Take the opportunity to inspect this machine under power at our premises and see the condition for yourself. Fgsdjx Eb D Eopfx Ab Tsk Immediately available.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x1500x1500 mm Weight 1400 kg Total power requirement 12,6 kw Fedpfx Ajvz Eu Dob Togk

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm Fgjdpfx Ash Nvyzob Tjk -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Fgedpfjx D Dagex Ab Tek Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital display Centre height: 150 mm Swing over bed: 300 mm Distance between centres: 1000 mm 3-jaw chuck, Fgjdpfxox Eah As Ab Tjk Tool holder Chip guard Chip tray

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Fgodpfx Absx D Iq No Tek Application Types Edge Banding

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm Fsdpfx Asx Eb A Uob Togk >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Weight 2200 kg Total power requirement 40,3 kw Fodpfx Ajvz Em Hjb Togk

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Fgodpex Dzxasfx Ab Tjk Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 Fedox Ddcuopfx Ab Tjgk 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Fsdpfxjx Dy U Ts Ab Tsgk Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Multifix tool holder A Lathe chuck Live centre

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120,000 h, General Data Machine weight 6000 kg Control Unit Brand FANUC Model 21i Main Drive Fgsdpfsx D D Nbex Ab Tok Number of axis 2 This Takisawa TT-200 BMC multi-spindle turning machine was manufactured in 2001. It features a twin-spindle (X + Z) horizontal CNC lathe configuration with a gantry forklift. Weighing approximately 6000 kg, it has both spindles operational, though the tool turret on the right side is broken. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Tranklein EK-D 100 double corner cutter Production Germany, Karl Tranklein. Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction ensures precision operation. Two trimming heads. Interchangeable knives. Adjustable margins. One set of knives included. Stack height 100mm Fsdpfx Abewxtgus Togk Weight 140kg Efficiency 50 cycles/min Power supply 400V

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Fgedpfx Abevz Ei Us Tek Weight 3500 kg Total power requirement 57,7 kw

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Application Types Fedex D I D Aspfx Ab Tjgk Edge Banding

Condition: ready for operation (used), Year of construction: 2025, Main Drive Number of axis 3 Fjdpjx D Dnkofx Ab Tsgk This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 1986, This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine. Application Types Fgodpfx Abjx D D R Ee Tek Edge Banding

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 4500 kg Fjdpfxex D Rdls Ab Tegk Main Drive Spindle speed range 45–4500 Number of axis 4 Movement X-Axis Movement 130 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 145 mm Z-Axis Rapid Traverse 24 m/min This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 5500 kg Workpiece Workpiece drm 15 mm Workpiece X 300 mm Fjdox D Ikcopfx Ab Tegk This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8300 kg Main Drive Number of spindles 2 Spindle speed range 5000 Spindle motor power 22 kW Number of axis 9 Additional Equipment Fjdex D R Ikspfx Ab Togk Automatic Conversational Programming System: Mapps 4 Automatic Effort Control and Tool Consumption Monitoring Oil Cooler for Both Spindles Double Pedal for Chuck Opening and Closing Interface for Bar Feeder Installation Automatic Rear Part Catcher (Special Clamp for Long Parts) Side Chip Conveyor (Hinged Type) Communication Ports: USB, PCMCIA Card, RS-232 Includes Electrical Transformer, Documentation, Parts List, Electrical Schematics, Programming, and Operation Manual This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning