Used Double Reel for sale (11,497)

Condition: excellent (used), Double bench grinder Lrsdok Iwx Eopfx Aftop

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Ledetqt T Ispfx Afterp - complete with hydrostation, - electrical cabinet.

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Lsdpfxjxrc Eqj Aftsrp Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Lrjdpfx Afexrdgvetjp Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Lsdpfxoym U Ino Afterp Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: good (used), Year of construction: 1998, operating hours: 1,452 h, load capacity: 1,600 kg, lifting height: 1,700 mm, fuel type: electric, mast type: duplex, empty load weight: 850 kg, mileage: 1,452 km, Electric double pallet stacker Brand: BT Year of manufacture: 1998 Capacity: 1,600 kg Lifting height: up to 1,700 mm Double pallet model Equipped with INITIAL LIFT, ideal for uneven floors Includes battery With charger Lrsdpfx Aezpflheftjp Watch the video on YouTube

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment. Lredpfx Afevwgm Hstsp

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm Lredpsvwglvefx Aftop table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Lodexa Hl Ropfx Aftorp Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm Lrsdpfevwgmgex Aftep The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm Lsdpfx Aezak Hgoftjrp y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm Lrodpfxoym D E Ae Aftop table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,895 h, load capacity: 2,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: telescopic, construction height: 1,540 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck forklift Load center: 600 Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Lsdpozpb Raofx Aftjrp Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: Still Battery type: PzS Battery year of manufacture: 2020 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Initial lift, non-marking tires, double-deck loading.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,780 h, load capacity: 2,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: telescopic, construction height: 1,540 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck forklift Load center: 600 Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Still Battery type: PzS Lredpfxozpb N Ns Aftep Battery year of manufacture: 2020 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and in accordance with FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used forklifts, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will gladly provide you with comprehensive and expert advice on our vehicles. Initial lift, non-marking tires, double-deck loading.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Vertical Turret Lathe - Double Column Brand: WALDRICH SIEGEN | Year of construction: 2018, commissioning: 2019 High-performance turning and milling unit with a modular design system for optimal adaptation to customer requirements. Fully hydrostatic guidance of all main axes for the highest cutting performance and precision. Main structural components made of high-performance cast iron for the best damping characteristics and high stiffness. Condition: Ready for use / operational. The machine can be inspected by appointment. Total operating hours: 65.432 h TECHNICAL DATA: Portal, passage width: 6.000 mm Travel distances: - Horizontal support (X1/X2 axis): 5.160 mm - Spindle slide vertical (Z1/Z2 axis): 2.000 mm - Distance X1/X2 (centre of spindle): min. 2.100 mm - Crossbeam vertical (W axis): 1.800 mm Lrsdpfx Afoynbxcjtep - Horizontal measuring device (X3 axis): 7.065 mm - Vertical measuring device (Z3 axis): 2.350 mm Faceplate: - Clamping surface diameter: 5.000 mm Rotary table: - Drive power: 2 x 110 kW - Number of gear stages: 2 Support Spindle drive: - Spindle drive power: 63 kW - Number of gear stages: 2 - Speed range stage 1: 0 - 600 rpm - Speed range stage 2: 0 – 3.000 rpm Spindle carriage: - Cross-section: 400 x 400 mm Electrical: - Total connected load: approx. 361 kVA EQUIPMENT: - Two rotary and milling supports - CNC-Control: SINUMERIK 840D sl - External and internal cooling lubricant supply - Chip conveyor (belt filter) - Extraction and filter system, Keller Vario - Workpiece measuring probe: Renishaw, RMP 60 - Additional accessories ... No guarantee is given for the completeness and accuracy of the technical data and equipment. Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm Lrsdpfxsg Db U Ae Aftsp weight ~ 5000 kg

Year of construction: 1991, condition: excellent (used), A. COSTA PUMA 2/60 double-shaft multisaw - Italian production - year of production 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor 1.1 kW height adjustment motor disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed control on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment Ljdpsh Izpcofx Aftsrp electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm Lrsdpfx Afew H R R Hetsp – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW Lsdpfx Aew H Rdajftsrp - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Lredpfx Aoq Ii Dlsftsp - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 610 mm, number of blades: 4, extraction connection diameter: 150 mm, number of planer blades: 4, planing height: 190 mm, – German-made – For wet wood TECHNICAL SPECIFICATIONS: – Planing width: 610 mm – Planing height: 190 mm Lrsdpfxexykn Aj Aftjp – Motor power: 2 x 5.5 kW – 4-knife cutterheads – Four feed speeds: 6 / 9 / 12 / 18 m/min – Two upper toothed feed rollers – One upper smooth feed roller – Two support rollers in the table – Row of anti-kickback fingers – Extraction port diameter: 150 mm – Machine dimensions (L/W/H): 160 / 140 / 170 cm – Weight: 1500 kg

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm Lrjdpoymd I Defx Aftep – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg Lodpfx Aezcdz Aeftorp – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Lredexqgf Ejpfx Aftjp

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Lodpfxoznn Upj Afterp Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton