Used Dosing System for sale (1,101)

Condition: new, Year of construction: 2025, Vertical packaging machine as high-speed version with auger dosing unit for powder. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm; suitable film width: 240mm; suitable film: composite film, heat sealable (monofilm on request); dosing range: 1-50g; max. speed of the machine in neutral: 150 cycles/minute; power supply: 220V, 50Hz; power consumption: 5kW; air pressure: max. 0.6MPa; dimensions: L900xW700xH170mm; weight: 280kg. Ijdov Nnh Aepfx Ah Njht Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Iodpfevpfhyox Ah Njht Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: used, Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control Ijdpfx Ahet Ulume Noht -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

Condition: used, - Dimensions: 1050 x 660 x 990 mm - Empty weight: 62 kg - Operating weight: 192 kg - Precise water cooling down to +0.5°C, ideal for bakery and pastry applications - Double-walled insulated stainless steel tank, useful volume: 135 litres - Easy cleaning: rounded corners, hygienic and accessible design - Water flow rate up to 10 L/min (gravity-fed) - Includes DMA dosing kit for precise water metering in your recipes Ihodpfx Aow Ducboh Nst

Condition: like new (used), functionality: fully functional, Volumetric dosing - With built-in Ruhrwerk - Twin screws - Built-in tamping unit for materials with low bulk density Ihjdpfx Aet Akaqoh Njt

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Volumetric dosing machine COMAS model DN (reconditioned with new dosing unit) Specialized machine for dosing “sponge cake” composition and creams onto cake layers: a) Sponge cake onto mould trays with diameters of 240–260 mm and thicknesses of 7–12 mm, or onto rectangular trays with custom circumscribed dimensions. b) Creams onto the layers from point a) in multiple layers (optional). Machine configuration: - Main structure made of stainless steel (S/S) with wheels and locking pivots. - Dosing head with pneumatic operation, Waicon and/or Fesner brand. - Height adjustment device for the dosing head, operated by handwheel. Ihjdpowxlm Tjfx Ah Njt - Product dosing volume adjustment device, operated by handwheel with markings. - No. 1 height-adjustable work surface. - No. 1 50-liter buffer tank for sponge cake composition storage. - No. 1 interchangeable dosing cylinder, diameter 100 mm. Adjustable dosing volume from 78 to 1240 cm³. - No. 1 terminal distributor for dosing into moulds with diameter 260 mm, equipped with perforated diaphragm for final closure. - No. 1 limiting pedal for dosing actuation or line synchronization. - No. 1 set of nozzles for sponge cake dosing. - Optional cream decoration (see pictures/next page). - No. 1 electrical installation and control panel. Main technical features - All parts in contact with the product are made of AISI 316 stainless steel or other decontaminable materials. Structure made of AISI 304 stainless steel and/or food-grade aluminium. - Transmissions and gears made of chrome-plated steel. Bearings are stainless steel-coated with hermetic sealing. - Pneumatic system: Waircom and/or Fesner brand. - Compressor: excluded. - Working cadence: a) Manual, via pedal (estimated 5–15 cycles/min). b) Automatic mode: 8–15 cycles per minute, adjustable.

Condition: new, Year of construction: 2025, Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm; suitable film width: 240mm; suitable film: mono-material or laminated, heat sealable; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L700xW600xH1600mm; weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ihodpfxsv Nnhcs Ah Net

Condition: excellent (used), Dosage filler. Iodpjvhbckofx Ah Neht Make - FillFlex. Model - F5500A Capacity - 25L/min. Dosage from 20ml-1500ml. Max temperature - 60 degrees or above. Extra pump housing included and hose pump head for dosing. Various spare parts included. CLH.24

Year of construction: 2010, condition: used, Dosing system, dosing device, dispenser for dosing system, dosing machine, paint mixing system -Manufacturer: FAST Iedpfx Ahju Huvlj Nsht

Condition: ready for operation (used), Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible. Ihedoq Npf Ajpfx Ah Not

Condition: ready for operation (used), The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Iodewnr Trjpfx Ah Njht

Condition: used, Year of construction: 2000, type of input current: three-phase, 1 dosing scale for bulk materials. Most recently used for limestone powder. Container: stainless steel Iodpfxev T T H So Ah Noht Discharge via screw conveyor

Condition: new, Year of construction: 2025, Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: L(40-170)xW(20-110)mm; suitable film width: 220mm; suitable film: composite film, heat sealable; dosing range: 1-30g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2,8kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L930xW750xH1920mm; weight: 350kg. Ijdpsv Nniysfx Ah Noht Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Iedpfx Ahsibx S Nj Noht Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: used, dosing pump, piston pump, diaphragm pump -Manufacturer: Preci-Pompe, dosing pump with stainless steel container -Type: PP 31 -Motor: VEM 0.55 kW -Individual components: see photos -Dimensions: 680/440/H620 mm -Total weight: 87 kg Ihedpfx Ahou Huu Uo Nst

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Iodsh Akm Tjpfx Ah Nsht

Condition: used, Stainless steel dosing screw, auxiliary feed screw Entirely stainless steel Screw flight diameter: 150 mm Ihedpfxjw Abtde Ah Not Hopper dimensions: 800 mm x 700 mm x 1100 mm See our other listings VMA Wekerom

Year of construction: 2025, condition: new, Auto Dosing Machine to dose agricultural products (potatoes, onions, etc.) into knitted sleeves, boxes, pallets, bags or cases. The products shall be cleaned and sorted out to have a smooth and trouble free operation. - Specifications: min. - max. size of fruits (mm): 20-120; 70-Liter hopper (~ 50kg potatoes with sizes of 70-90mm); dosing weights: 3-50kg (in steps of 0.01kg); 2 parallel feeding conveyors (one for main volume, one for final fine filling); max. speed of the machine in neutral: 6 cycles/minute; machine dimensions: L2800xW790xH2232mm; weight: 380kg. Iedpfx Ahev Nmx Hs Nsht Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Filling system, filling machine, filling station, table filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 Ijdpfjumpnbox Ah Neht -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170mm -Weight: 9.6 kg

Year of construction: 2012, condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Iodpfjqygxmsx Ah Noht

Condition: new, Year of construction: 2025, Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film: composite film, heat sealable; dosing range: 1-50g; max. speed of the machine in neutral: 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH1900mm; weight: 300kg. Ihjdpfov Nniasx Ah Net Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun Ijdpjdntftsfx Ah Noht -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Iodpfxow R Uzpj Ah Neht

Year of construction: 2025, condition: new, Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: L(40-170)xW(20-110)mm; suitable film width: 220mm; suitable film: composite film, heat sealable; dosing range: 1-30g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2,8kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L930xW750xH1920mm; weight: 350kg. Ihjdev Nnitjpfx Ah Njt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Ihjdpow Hgltofx Ah Net