Used Doosan Dx 27 Z for sale (264)

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Bdjdpfx Asyfxv Tscnjg We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, operating hours: 2,348 h, 2021 | Doosan DX225LC-5 | Used Tracked Excavator | 2348 hours Bdjdpfxezkuaks Acnjg 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 120000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 66 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in very good condition. Few hours and the track is almost new. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41033 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Bdjdezbilqjpfx Acneg Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Bsdpfx Asyvuvxecnodg

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Bdjdpfx Acozuddyjnjg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Bdjdpfxsyugvas Acnog Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec Bdedpjy Uwzbefx Acneg • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm Bdjdpszak Dxofx Acnsg SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Fanuc control, spindle bore 65mm, two turrets, Y-axis, counter spindle, powered tools, chip conveyor, short bar magazine, Bjdpfx Acjzwhhhjnsdg accessories.

Condition: used, Year of construction: 2023, operating hours: 1,773 h, 2023 | Doosan DX225LC-5 | Used Tracked Excavator | 1773 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 140000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine with very few hours, in very good condition, no issues. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40971 Equippo" is commonly used when looking up more details online. Bdedpfx Acszkuk Njnsg 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. Bdedszcmmnepfx Acnjg High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Year: 2007 Fanuc 21iTB with Manual Guide Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Turret: BMT 65 Tailstock Bdsdpfx Acoyrb Urjnjg Tool probe Chip conveyor, coolant tank with pump Tool holders Machine documentation Condition: very good

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Bsdpjx D Igdefx Acnsdg Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,520 mm, turning diameter: 540 mm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,595 mm, rotational speed (max.): 3,500 rpm, number of slots in tool magazine: 40, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS CNC control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar capacity: 76 mm Turning-milling spindle X-axis travel: 555 mm Y-axis travel: ±80 mm (160 mm total) Z-axis travel: 1,595 mm B-axis indexing: ±120° (240° total) Tool system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 1.5 s Number of tools in the magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous operation): 15 / 11 kW Lower turret X-axis travel: 185 mm Y-axis travel: 1,640 mm Number of tool positions: 12 Max. speed of driven tools: 4,000 rpm Main spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle mount: ASA A2-8 Bdjdjxf Hrnopfx Acnsg Spindle bore: Ø86 mm Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous operation): 26 / 22 kW Counter spindle Max. spindle speed: 3,500 rpm Counter spindle travel: 1,565 mm Travels and rapid traverses X1 axis travel: 555 mm X2 axis travel: 185 mm Z1 axis travel: 1,595 mm Z2 axis travel: 1,640 mm Y axis travel: ±80 mm (160 mm total) A axis travel: 1,565 mm C1, C2 axis travel: 360° (0.001° resolution) B axis travel: ±120° (240° total) B axis coupling angle: 15° X1, Z1, Z2 axis: 24 m/min Y axis: 16 m/min A axis: 24 m/min C1, C2 axis: 200 rpm B axis: 27 rpm MACHINE DETAILS Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - Fanuc 18iT-B CNC control - Capto C6 tool system - 40-position tool magazine - Lower turret with 12 tool positions

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes Bdedjtzgaqopfx Acnjg High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Bdjdpey Nmdnsfx Acnjg Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm Bdsdpfx Asx Sq Uvjcneg B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: FANUC, spindle speed (max.): 20,000 rpm, spindle motor power: 37,000 W, number of axes: 4, This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details. • Rapid traverses • X/Y/Z: 60 m/min • Cutting feedrate: 1–30,000 mm/min • Ballscrews: Ø45 x P20 • Accuracy • Positioning: ±0.003 mm (full stroke) • Repeatability: ±0.0015 mm • Measurement system • X/Y/Z/B: absolute pulse encoders • Optional linear guides on X, Y, Z • Distances • Spindle nose to table center: 100–980 mm • Spindle center to pallet surface: 80–810 mm • Spindle • Speed: • Standard/high-torque: 15,000 rpm • High‑speed option: 20,000 rpm • Base speed: • Standard: 1,200 rpm • High‑speed option: 1,800 rpm • Motor power: • Standard: 30 / 22 / 18.5 kW • High torque option: 37 / 26 / 22 kW • High‑speed option: 37 / 30 / 26 / 18.5 kW • Max. torque: • Standard: 229.9 / 206.9 / 147.2 / 119.4 Nm • High torque: 303 / 261 / 204 / 147 / 119 Nm • High‑speed option: 221 / 200 / 156 / 98.1 / 79.6 Nm • Tool clamping force: 9.8 kN (15.7 kN with HSK spindle) • Transmission: Integrated drive • Axis motors • X: 5.5 kW (7.37 hp) • Y: 4.5 kW (6.03 hp) • Z: 5.5 kW (7.37 hp) • B indexing motor: 1.4 kW (1.88 hp) • B 0.001° motorized: 2.7 kW (3.62 hp) • B axis / rotary table • Indexing: 1° indexing; 0.001° rotary table • Positioning accuracy: ±3" (±6" for rotary table) • Repeatability: ±1" (±4" for rotary table) • Max rapid rotation: 30 rpm Bsdpfx Ajy Tluaocnsdg • Clamping force: 93 kN • Clamping torque: 4327 Nm • Pallet • Size: 500 x 500 mm • Type: Threaded pallet; T‑slot pallet • Pattern: 24‑M16 x P2.0; 5‑18H8 • Machine travels reference • X/Y: 28.74" • Z: 34.65" Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Bjdpewu Rgqsfx Acnedg Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B Bjdpfx Acezh Uzcjnedg -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine Bsdpfx Acszh U D Donjdg -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump Bdedpfx Ajzh U A Tocnsg -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Bdjdpfoy Dunwex Acnjg Machine available for inspection under power by appointment.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Bdsdpfx Aszluq Eocnsg Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: excellent (used), Year of construction: 2018, operating hours: 5,742 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: FANUC i-Series, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,500 mm, overall weight: 8,500 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,963 h, coolant supply: 20 bar, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, USED ​​"DOOSAN DNM 6700" 3-axis vertical machining center with Fanuc i-Series CNC Bdodpfozrn Dxsx Acneg