Used Doosan Dx 225 Nlc for sale (325)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Gtjdpfox Ryrhex Agbot Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg.

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun Gsdpfex Rxv Sjx Agbstt - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor Gjdpfst H Nbuex Agbstt

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Gsdpsthb Icsfx Agbett Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: good (used), Year of construction: 2008, Year: 2008 FANUC 0i Series Control Swing over saddle: 500 mm Bar capacity: 76 mm Spindle size: 315 mm (12″) Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Swing diameter: 630 mm Tailstock quill diameter: 100 mm Tailstock quill stroke: 100 mm Taper MT #5 Turret positions: 12 stations Driven turret speed: 5000 rpm Rapid traverse XZ: 20 x 24 m/min Spindle motor power: 22 kW Spindle nose: A2 #8 Spindle speed: 3500 rpm Boring bar holder diameter: 50 mm Gtjdpfx Agex Rrf Tsbot Tool dimensions: 25 x 25 mm X-axis travel: 242 mm Z-axis travel: 1100 mm Machine dimensions: 3418 x 1670 x 1735 mm Machine weight: 4700 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin Godpfxjx Rpv No Agbjtt 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, machine/vehicle number: 16786, Year of construction: 2021, operating hours: 1,918 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, construction height: 2,200 mm, fork length: 1,200 mm, overall weight: 4,800 kg, enginetype: Electric, manufacturer: Doosan Gtedpfxox Rk Els Agbot

Condition: good (used), Year of construction: 2018, THIS MACHINE IS NOW READY FOR SALE. IF YOU HAVE ANY QUESTIONS ABOUT THIS MACHINE, PLEASE CONTACT US BY PHONE (06-54667163). THE TECHNICAL SPECIFICATIONS WILL BE PUBLISHED ON THE WEBSITE BY JANUARY 5TH AT THE LATEST. The Doosan (now DN Solutions) Puma GT3100LM is a robust horizontal CNC turning center, specifically designed for heavy-duty machining and high productivity. The “LM” designation stands for an extended bed (Long) with driven tools (Milling). Why the Doosan Puma GT3100LM? Gsdsx Rg U Aepfx Agbett This machine features the most powerful spindle in its class and offers a larger machining envelope than previous models. This makes the GT3100LM the ideal choice for workshops looking to efficiently machine medium to large workpieces with a high surface finish quality. Subject: Doosan Puma GT3100LM CNC Turning Center Year of manufacture: 2018 Machine number: ML0314-000104 Standard accessories: (still being finalized) Fanuc i-series CNC control Options: · Automatic tool setter · Tool load monitoring · Chain-type chip conveyor · High-pressure coolant pump, 5 bar · Programmable tailstock

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET Gtodpfx Agjq Nqkxebot X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Gtsdpjxzaqiofx Agbjt Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: good (used), Year of construction: 2015, Model Year: 2015 Width: 560 Length: 430 Height: 570 Number of Axes: 3 Holder: BT40 Gedpox N Txfefx Agbett Spindle Speed (RPM): 10,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Gsdpfex N S D Tjx Agbjtt

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Godpfx Agox I N Rbebett Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2013, Please contact us for further information. Gtsdpfx Agex Nqg Hobjt

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; Gedpfjw Dkflox Agbstt PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Gtedpfx Aew Srarjgbjt Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: like new (used), Year of construction: 2005, functionality: fully functional, CNC Lathe DAEWOO PUMA 2000 SY. Swing diameter over bed: 600 mm. Maximum turning diameter: 330 mm. Maximum machining length: 510 mm. Bar capacity: 65 mm. X-axis travel: 250 mm. Z-axis travel: 580 mm. Y-axis travel: +50 - 50 mm. B-axis travel: 580 mm. Main spindle: 18.5 kW - A2-6" - 4,500 rpm. Subspindle: 7.5 kW - A2-5" - 6,000 rpm. Driven turret with 12 positions (BMT). FANUC 18iTB control (Manual Guide i). Chip conveyor. Tool presetter. Parts catcher with conveyor belt. In very good condition. Gsdex I Srnepfx Agbett

Condition: used, Upper driven head with Y axis, lower driven head, twin spindles. Max. swing over bed: 300 mm. Max. swing over support: 230 mm. Max. swing over bed with upper head: 230 mm. Max. swing over bed with lower head: 230 mm. Max. turning length: 600 mm. Max. distance between the face of the right and left spindle: 980 mm. Milling range outside the turning axis via Y axis: 100 mm (+/-50 mm). Max. turned bar diameter (left spindle): 65 mm. Max. turned bar diameter (right spindle): 65 mm. Max. permissible workpiece weight without counter spindle (including chuck weight = 23 kg): 12 kg. Total weight: 7800 kg. Accessories: Feeder SS 2500, length 200-1525 mm. Gsdpfx Asx Np U Aogbstt

Condition: used, Year of construction: 2007, turning length: 510 mm, turning diameter: 250 mm, overall weight: 4,000 kg, controller manufacturer: Fanuc, controller model: I Series, Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle bore: 53 mm X-axis travel: 175 mm (160 plus 15 mm) Gtjdpfx Asx Nqwlsgbot Z-axis: 550 mm Spindle speeds up to 6,000 rpm Tailstock 12-position turret All 12 stations equipped with driven tools

Condition: used, Year of construction: 2013, x-travel 650 mm Godpfx Agexzk Npjbstt y-travel 765 mm z-travel 520 mm weight of the machine ca. 10000 kg

Condition: good (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller model: Fanuc, Catalog No. : 7960 Type: DNM 4500 Producer: DOOSAN Made in: 2022 Characteristic: Control system: Fanuc Hours on: 2471 h Gsdpfx Agjuxcd Uebstt Length of the working table: 1000 mm Width of the working table: 450 mm X-Axis travels: 800 mm Y-Axis travels: 450 mm Z-Axis travels: 510 mm Machine weight: 5000 kg

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Gsdpfou Sfncox Agbstt Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2017, operating hours: 14,421 h, Type of fuel: Diesel Empty weight: 12.860 kg Dimensions (LxBxH): 405 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.440 x 2.200 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00135 - Operating hours: 14421 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3920mm Gedsx Iqcxspfx Agbjtt - Free lift: 0mm - Fork length: 2440mm - Maximum fork width: 2200mm - Minimum fork width: 570mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Heating, Full cabin, Radio, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4050mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 12860kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2019, control Fanuc F0-iTF + MG i turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. Gtjdpex Ik Ubofx Agbot spindle hours ca. 8.953 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Driven tools - Chip conveyor - Parts catcher - Coolant pump, 7 bar, 25 L/min - Automatic tool measuring arm Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2016, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. auto power on hours ca. 13.086 spindle hours ca. 4.221 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Gtsdpfx Agsx Ik T Robot - Coolant pump, 7 bar, 25 L/min - Oil separator - Pneumatic parts catcher with collection box - Automatic tool measuring arm - Automatic cutting force monitoring Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.