Generator

Doosan PO86TI

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Gbsdpfxeytdkfo Ad Isp Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm Gsdpfx Asw S Efzsd Ijbp centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), functionality: fully functional, Year of construction: 2021, Used container facility, dry, leak-proof, in good condition. Individual sale is possible. - Consists of 14 units of 20 ft containers and 2 units of 16 ft stair containers = approx. 210m² - Cement-bonded floor slab Godpfx Adsy Ahvro Isbp Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Insulation: Roof: 100 mm Wall: 60 mm Floor: 100 mm Features: - 2x double-leaf external doors - 4x external doors - cement-bonded floor slabs - air conditioning units - plastic windows with insulated glazing and tilt/turn function - blinds - electric heating - sealing gaskets - wall paneling - ceiling paneling - transition plates - container clamps - VDE standard 400V/32A/5 - forklift pockets - Documentation available - Signs of wear on floor covering Loading and transport can be arranged. Only serious and credible inquiries that include name, email address, and telephone number will be answered.

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available. Gjdpfx Adjyhc T Ij Iobp

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V Gbodpfx Aex E Dn Njd Iep weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: good (used), Year of construction: 1993, Power generator is in good working condition. Gbsdpoyh U Tqjfx Ad Iop Technical details shown on machine plate.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Gsdjw D Dy Nopfx Ad Isbp

Condition: ready for operation (used), For sale: a conveyor belt with dimensions of 1x3 meters, ready for operation. ✅ Length: 1x3 m ✅ Belt width: 0.4 m Gbedpjt R R T Tofx Ad Iop ✅ Transport can be arranged ✅ A wide selection of conveyor belts is available on site Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2198535, overall weight: 2,409 kg, fuel type: diesel, tank capacity: 600 l, color: red, power: 160 kW (217.54 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 160 kW (217.54 HP), nominal power (apparent): 220 kVA, continuous power: 160 kW (217.54 HP), continuous power (apparent): 220 kVA, total length: 3,300 mm, total width: 1,200 mm, total height: 1,970 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 42.1 l/100km, fuel consumption (urban): 24 l/100km, fuel consumption (extra-urban): 32.87 l/100km, fuel: diesel, fuel tank capacity: 600 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,970 mm, control cabinet length: 3,300 mm, control cabinet width: 1,200 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 200 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage-V. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 600 liter heeft de generator een autonomie van maximaal 14 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 200 KVA - Nom. vermogen: 220 KVA - Max. vermogen: 220 KVA - Motor: FPT/Iveco NEF67TM7 - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 220 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 68 dB(A) op 7 meter - Brandstoftank: 600 liter - Autonomie: - 100% PRP: 14 uur - 70% PRP: 18 uur - Motorvermogen:160 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3.30 m x 1.20 m x 1.97 m - Gewicht: 2409 kg - Emissieklasse: Stage-V Brandstofverbruik: - 100% PRP: 42,1 L/h - 70% PRP: 32,87 L/h - 50% PRP: 24 L/h Opties: Gbodpfjwf Nkcsx Ad Isp - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 200 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: CMX 70 U Year of manufacture: 2022 Control system: Celos with Siemens 840D sl Operate Technical data: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm B-axis: -10 to +95° C-axis: 360° Main spindle: Tool interface: SK 40 Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (40/100%): 20 / 14.5 kW Torque - main spindle (40/100%): 121 / 84 Nm Work table: Table size: D 800 x 620 mm Tool changer: Number of tool positions: 30 Max. tool diameter: 80 / 130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 120 kg Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 5,300 h Spindle hours: approx. 3,010 h Godpezcy I Sjfx Ad Isbp Technical features & accessories: - Direct linear measuring system in x, y, and z, incl. air purging - Compressed air switching via M function - Chip disposal package, includes: - Chip conveyor, tank 300 l - Spray gun - Signal light, 4-color - Tropical package, includes: - Active control cabinet cooling - Additional cooler on the control panel - Hydraulic oil temperature sensor - Cooling unit 3.3 kW for the main drive - Preparation for oil mist separator - Measuring probe kit, manufacturer Heidenhain, includes: - TS460 workpiece measuring probe - Measuring cycles - Tool length/diameter kit, manufacturer Heidenhain, includes: - TT160 for tool measurement - Measuring cycles, incl. tool breakage monitoring - Automation package, includes: - Loading and unloading via automatic magazine door - Automatic closing of the tool magazine - Cabin roof - Electronic handwheel - ATC (Application Tuning Cycle) - Preparation for 3D quickSET Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!