Used Doosan Dl 200 for sale (259)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs Dcsdey Dr A Eepfx Ailsn - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Djdpfx Aey Dunweiljcn An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: used, Year of construction: 2015, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, 2-axis CNC lathe Doosan Puma 2600LB Year of manufacture: 2015 Siemens 828D control system with Shop Turn interface Axis travel: X - 260 mm Z - 1350 mm Max. turning diameter: 481 mm Max. turning length: 1275 mm 12-inch (315 mm) chuck with a large spindle bore of 102 mm 12-tool turret Tailstock Very good machine condition Dodszxz I Rspfx Ailecn Included with the machine: - Documentation - LNS chip conveyor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) Dcsdpfx Aisy Nmdnelen - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, Dodsz Ehvfjpfx Ailjcn milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid Dcodpfxozh U A To Ailen -LNS MH500 chip conveyor- right side -mist collector interface

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways Dcodpfx Aiozvq Dpelen --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm Dedoy Tmlmspfx Ailocn -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool load monitoring -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Dcedpjzluq Eefx Ailsn Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Tailstock, Swarf Conveyor, Coolant, Dedsz D Axfepfx Ailscn

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: Dcjdpfx Aezlcyujilon - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Load capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks Dedpsz E S Eqofx Ailecn - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, Dcjdpfx Ajz D Ayvoilon 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. Dcodpjzia Evofx Ailon The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm Djdpsz Eaz Tefx Ailocn • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Dcedszzap Eepfx Ailon Presetting tools Chip conveyor Parts collector Set of tool holders, including 2 motorized ones

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism Dedpjzi Da Rsfx Ailscn - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Dcedpfx Aezzzwqeilen Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Dcsdpfjzrmiaox Ailon

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, a very stable machine that operates without any issues – it is only used for machining aluminum plates. Djdpfjzmzcqjx Ailscn

Condition: used, Year of construction: 2015, Control system: Fanuc series 32i Max. workpiece diameter: 800 mm Clamping diameter of rotary table: 450 mm Max. table load: kg Max. workpiece height: 750 mm Ram travel (Z): 780 mm Ram size: mm Driven tools: yes Tool magazine: YES Number of positions in magazine: 8 Travel X-axis: 390 mm Travel Z-axis: 780 mm Table rotation: 20 - 2000 /min Main motor power: 30/37 kW Dodpfxszxgcyo Ailjcn Max. spindle torque: 2243/2766 Nm Machine weight: 9000 kg Machine dimensions (l x w x h): 2000x2800x3300 mm

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Dcodpfxezw N E Is Ailen Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: used, Year of construction: 2012, operating hours: 8,501 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140 LCR YEAR: 2012 CE MARKED: YES OPERATING HOURS: 8501 HOURS TYRES/UNDERCARRIAGE: 50% POWER: 74KW ENGINE: CUMMINS QSB 4.5 WEIGHT: 14,800 KG OPTIONS: TRACK EXCAVATOR Dsdpfx Aiozg Sfiolscn BLADE VA BOOM WORK LIGHT HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, Dcsdpfxszzwgnj Ailsn sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart Dedsz Hb Htjpfx Ailscn • High-pressure coolant system Technical Specification Driven Tools No