Used Dividing Head for sale (10,493)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Kdjdpfx Ahswh Rp Ej Ejt Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Kodpfx Ajxw R Udjh Esdt # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: used, machine/vehicle number: 2032, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for tool grinder Ksdpfec Nw Svjx Ah Eedt -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops Kdjdpfx Asxraimjh Eet 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: good (used), Stock number: 2888 Make: Hermle Machine number: Type / Model: FU 801 Travel x-y-z: 400 - 150 - 350 mm Manual travel: 430 - 160 - 370 mm Table: 800 x 220 mm Speed range: 50 to 3,150 rpm Kdedpsub Rxcjfx Ah Eet Spindle holder: SK 40 Feed rates: 4 to 1,100 mm/min Rapid traverse: 8 to 3,300 mm/min Connection: Accessories/equipment: Coolant device; counter bearing, dividing head (integrated), various holders, various horizontal spindles Condition: good, Z-axis only works with manual adjustment Weight: 0.8 t Dimensions: 2,300 x 1,700 x 2,400 mm

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Kdodpfxjyi Amwe Ah Eot Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system Ksdpfxeugpwno Ah Eedt No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Technical data – Schaublin 53 N Model: N Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·t/min Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories Kodpfx Ahjyhm D Ds Eodt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Cover SOE graver grinding machine Largest bore of the collet 17.5 mm Largest grinding length 90 mm Largest grinding angle 180° Largest sandable radius 10 mm Coarse displacement 100 mm Fine adjustment 15 mm Pivoting of the dividing head support 90° Coarse adjustment of dividing head slide 40 mm Fine adjustment of dividing head slide 12 mm Height from center of tube guide to center of grinding spindle 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Rail for twist drill Optics Collets Grinding wheels Kedpfx Asq U R Tzeh Eedt You are welcome to visit us for an inspection. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The offer includes a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. It is designed for the production of: • round, marked buns • elongated, unmarked buns • cut buns • twisted buns • Kaiser rolls Kodpfjy And Nsx Ah Eodt • hot dog buns • Poznań-style buns Product description: • Fully automatic and compact bun production line • Based on a Mini Rex Futura divider-rounder from 2009, which is rotary • 2-row operation • Manual removal of products from the discharge conveyor • Marking station with easily replaceable tools; includes heads for: Kaiser rolls and Korinsky buns • Integrated elongation and flattening unit • Weight range: - for marked buns from 25g to 75g dough piece weight – output: from 1,800 pieces/h to 2,640 pieces/h, - for unmarked buns 80g - 125g dough piece weight – output: from 1,800 pieces/h to 3,960 pieces/h. • Fermentation time: approx. 6 minutes at an output of 2,000 pieces/h • Dough types: wheat, whole wheat, yeast dough, donuts. • Single-person operation The machine is in the final stage of renovation. The attached photos show its current, actual condition. If you are interested in the price and would like to see more photos, please contact us.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Kdsdpfx Aheyitxqs Eot Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: used, Year of construction: 2009, Roll production line WP Multimatic MUS Rollmeister SC 51 Year of manufacture: 2009 Suitable for sliced rolls, round rolls, and long rolls Maximum hourly output: approx. 5,100 pieces Weight range (without proofing): 30-90g Weight range (sliced rolls): 40-65g Pre-proofing cabinet I (before long rolling): 6 minutes Pre-proofing cabinet II (after long rolling, before cutting): 6 minutes Dough divider and rounding machine Multimatic MUS, 4-row Pressure roller on spreading belts after the head machine Long rounding station Pressure roller before the cutting station, height-adjustable Cutting station Bypass for green operation without proofing cabinet Discharge device for Euro pallet sizes With heating and humidification With tunnel dryer Kdedpfoz A Sd Iex Ah Eot

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Fortuna Automat A 3 E + roll press TOP model with automatic shut-off Head cleaning to the rear Partial head with stainless steel blade, NEW Dough divider with 3 dividing heads robust technology Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty Kdedpfx Asy Nv Amjh Eot Visit our unique machine exhibition!

Condition: used, Year of construction: 2004, Roll production line König Mini Rex G2000 Year of manufacture: 2004 Compact system G2000 with Mini Rex 4000 heading machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Weight range: 35-85 g Ksdpfxoz A R Apj Ah Esdt Dough divider size: SKG58 and RK58 Dough dividers for round and square rolls Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Dough rounding unit incl. one dough rounding tool of your choice, subject to availability Integrated infeed and long roller

Year of construction: 2003, condition: used, Roll divider Fortuna Automat A3E Condition: refurbished Fully automatic dough dividing and rounding machine 30-piece division Kdodpfx Asz A Skzeh Est With rounding stop Tilting head via hand crank (for cleaning) Dough piece weight: 960-2100 g Weight (dough piece): 32-80 g External dimensions (W x D x H), without base frame: 690 x 800 x 1470 mm Machine weight: approx. 540 kg Includes 3 rounding discs (new) Includes base frame

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety Kdodpfx Aezv Safoh Eot - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: used, Fortuna A4E Automatic Roll Divider and Rounder Fully automatic dough dividing and rounding machine 30-piece division With rounding stop With electrically tilting head (for cleaning) Dough piece weight: 1,200-3,300 g Weight (per dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Kdodpfx Ahez A Sk Io Eet Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4 Automatic Roll Former Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function Tilting head via hand crank (for cleaning) Dough weight range: 1,200-3,300 g Weight (dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding discs (new) Kdjdpfsz A Sk Usx Ah Eet Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with locking brake + 2 fixed castors)

Condition: used, Fortuna A4E Automatic Roll Divider and Rounder Fully automatic dough dividing and rounding machine 30-piece division Kdodez A Sgpepfx Ah Ejt With rounding stop With electrically tilting head (for cleaning) Dough piece weight: 1,200-3,300 g Weight (per dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4 Automatic Roll Divider and Rounder Fully automatic dough divider and rounder 30-piece division Kdsdpfx Ahjz A Stie Est With rounding stop Tilting head via hand crank (for cleaning) Dough weight range: 1,200-3,300 g Weight per dough piece: 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 2 rounding plates Optional: Base frame with fixed feet Base frame with casters (2 swivel casters with brakes + 2 fixed casters)

Condition: used, Fortuna A3E Automatic Bread Roll Former Fully automatic dough divider and rounder 30-piece division With rounding stop Tilting head via hand crank (for cleaning) Dough piece weight: 960-2100 g Weight (dough piece): 32-80 g External dimensions (W x D x H), without base frame: 690 x 800 x 1470 mm Machine weight: approx. 540 kg Includes 3 rounding plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors) Kdodpfx Ahoz A Snao Est

Condition: used, Fortuna A4 Automatic Roll Former Kodpoz A Sm Nefx Ah Eedt Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function Tilting head via hand crank (for cleaning) Dough weight range: 1,200-3,300 g Weight (dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding discs (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with locking brake + 2 fixed castors)

Condition: used, Fortuna A4E Automatic Roll Former Kdodpfxjz A Sgio Ah Eot Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function With electrically tilting head (for cleaning) Dough weight range: 1,200-3,300 g Weight per dough piece: 40-110 g External dimensions (L x W x H), without base: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Base with fixed legs Base with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A3 Automatic Bread Roll Forming Machine Fully automatic dough dividing and rounding machine Kdodpfx Ahjz A Si Ds Eot 30-piece division With rounding stop Tilting head via hand crank (for cleaning) Dough piece weight: 960-2100 g Weight (dough piece): 32-80 g External dimensions (W x D x H), without base frame: 690 x 800 x 1470 mm Machine weight: approx. 540 kg Includes 3 rounding plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4E Automatic Roll Former Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function With electrically tilting head (for cleaning) Dough weight range: 1,200-3,300 g Weight per dough piece: 40-110 g External dimensions (L x W x H), without base: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Kjdpfsz A Sgvsx Ah Eedt Base with fixed legs Base with castors (2 swivel castors with brakes + 2 fixed castors)