Used Digital Printer for sale (10,414)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition - Operated in a clean professional studio environment - Preventive maintenance performed regularly Godoyt Rk Eopfx Ak Uskb - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: used, Year of construction: 2015, functionality: fully functional, cutting width (max.): 3,210 mm, cutting length (max.): 3,200 mm, overall weight: 1,945 kg, type of input current: three-phase, total width: 3,920 mm, working width: 3,210 mm, total length: 5,100 mm, input voltage: 400 V, input frequency: 50 Hz, The Kongsberg C64 is a used digital cutting table manufactured in 2015. It is in good working condition and has been regularly serviced by an authorized distributor. With a working area of 3,210 × 3,200 mm, it is designed for precise cutting, milling and finishing of large-format materials. Gjdpfx Aszz Igxjk Uskb The machine is equipped with a 3 kW milling unit, an i-camera system, eight vacuum zones, a workstation, the QuickRelease system and a range of tools for cutting, milling, V-notching and processing self-adhesive vinyl. The machine is sold without a conveyor system and is in good working condition.

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Gjdpey Rq Hisfx Ak Uskb Build volume: 330 x 270 x 200 mm Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Location on request! Collection or transport can be arranged.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² Gkodpfx Akjzt Dmrs Usb UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Optional accessories are negotiable. Further information available upon request. Gkodpfxjyag Ims Ak Ueb

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, • Realistic simulation of end products through the combination of different materials • Multi-material parts: Simultaneous application of different modeling materials • Mixed Tray: Production of various parts made of different materials in a single process step • Wide selection of FullCure® and composite materials: Photopolymer for model and support materials; dynamically generated Digital Materials™ • Numerous design and printing processes • Greater creativity through the use of multiple materials and composites with different material properties and color shades • Highest quality and accuracy • High-resolution 16-micron layers guarantee smooth surfaces and fine details • 350x350x200 mm large build platform for the production of various parts and assemblies • Suitable for use in an office environment TECHNICAL DATA - Layer thickness (Z-axis): up to 0.016 mm - Build platform (X x Y x Z): 350 x 350 x 200 mm - Build volume (X x Y x Z): 342 x 342 x 200 - Resolution X = 600 dpi, Y = 600 dpi, Z = 1600 dpi - Printing modes Digital Material (DM): 0.03 mm High Quality (HQ): 0.016 mm High Speed (HS): 0.03 mm - Accuracy: 0.1 - 0.3 mm typical - Model materials FullCure 720, universally applicable and transparent Vero, opaque material DurusWhite, polypropylene-like material Tango, rubber-like elastic material Gkedpfx Akjzw Emho Ueb ACCESSORIES Spare parts new replacement print head (new price approx. €1,000)

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste Gksdjyk Ip Tjpfx Ak Usb ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Suitable Applications Ideal for: • Self-adhesive labels • Paper and film labels • Flexible packaging • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays Gkedpszkawuofx Ak Uob • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Gjdpfx Akjytg Rzs Uskb Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Gkedpfx Aeznl N Rjk Usb Machine running on external Air pressure, to reduce machine noice. Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. - Support Removal Wash Unit (German Sonic Cleanstation UW90) Machine located in Roskilde, Denmark

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Gedswna R Sepfx Ak Uokb Machines ready for pickup.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer, a digital flatbed printer, replaces conventional laser printers and enables color printing on glass, wood, textiles, plastics, metals, and many other materials. Easy to peel and apply to various surfaces! New model: UV4060DTF Print head: Epson TX800 2690 dpi max. Includes software for the printer and image editing. Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height are possible. 5 x 500ml of ink can be supplied (additional cost). Software setup and printer explanation are available upon request, throughout Germany/Europe (additional cost). Demo videos, etc., can be sent via email/WhatsApp. Gksdsg Icd Sjpfx Ak Ujb

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. Gkjdpfjd Etadsx Ak Ujb The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: used, Year of construction: 2011, machine/vehicle number: 1537111, type of input current: three-phase, input current: 30 A, input voltage: 400 V, EFI VUTEk GS3200 UV roll-to-roll printer, year of construction 2012, including two extension tables. Sold directly by the owner: a Belgian manufacturer of visual communication, founded in 1832 and part of an international group, ISO 9001 and ISO 14001 certified. This printer comes from our own production floor. It is for sale because our focus is shifting towards total solutions in visual communication, not because there is anything wrong with the machine. MACHINE - EFI VUTEk GS3200 UV printer - Printing width up to 3.2 m - Year of construction 2012 - Supplied with 2 extension tables Gksdpszvu Niefx Ak Ujb CONDITION Used, from our own production. Sold as seen, without factory warranty. We will tell you the exact condition and answer every technical question before you decide. Additional photos and technical details available on request. PRACTICAL - Ex works, collection in Olen, Belgium - Dismantling, transport and installation can be arranged at day rate - Business sale with invoice - Payment before collection Get in touch through this listing for additional photos, exact specifications or a viewing appointment.

Condition: excellent (used), Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes proven, configurable standard weighing applications: · BASIC for simple weighing systems · COUNT for piece counting · CHECK for simple checkweighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be configured from a PC using the IT3000 Configurator or directly via the network using a web browser. After each weighing operation, the weight, date, time, and entered data can be saved directly to a file on the PC's hard drive via Ethernet. No special PC software is required for this. In ONLINE mode, the IT3000 can be remotely controlled from a PC via the Ethernet interface. The command set includes weight requests, taring, zero-setting, and dialog functions. Any scale overload or other faults are logged in an error table—complete with date and time—and can be viewed via a web browser. Features an integrated legal-for-trade weight memory; optional legal-for-trade weight memory on the PC hard drive is also available. Operation User guidance via 20-character backlit plain-text display; data entry via numeric and function keys beneath an acid-resistant overlay. Weighing Electronics Integrated measuring amplifier for connecting up to eight 350-ohm strain-gauge load cells (4- and 6-wire technology). Calibration as single-range or multi-range scale and as single-interval or multi-interval scale. Legal-for-trade resolution: 6,000d at max. 80% preload; internal resolution: 524,000d. 50 filtered measurements per second. Calibration performed either on the IT3000 via display/keypad or via the Ethernet interface. Ethernet Interface Integrated Ethernet interface (RJ45) with configurable IP address for 10/100BASE-T networks. Configuration via network using "EtherPort Tool" PC software. Security Data stored in a power-failure-proof manner. Password protection. Interfaces One optional serial interface (selectable: RS232, RS485, or passive 20mA CL) for connecting a printer, remote display, or reference scale. Digital Inputs and Outputs Optional PIM module with two digital 24V inputs and two digital 24V outputs. Gkedpfx Akjzp Uybo Ujb Power Supply 110 (–15%) – 240 (+10%) VAC; 50/60 Hz, Max. power consumption: 15 VA; Option: 12 – 30 VDC. Operating Temperature –10°C to +40°C at 95% relative humidity, non-condensing. Options / Accessories Ethernet connection cable Protective cover PC COM+ communication software for online operation PC ARCHIVE software for storing weight data on a PC hard drive in a format suitable for legal-for-trade applications. You can find additional items in other sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Gksdpfxowi T Tvo Ak Ujb Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, Everything is still quiet. Godpfxsy Siqis Ak Ujkb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Gkedjyr Aiwjpfx Ak Ueb Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, This listing is for the Mettler Toledo P25 Printer The unit is in full working condition and is ready for immediate use The Mettler Toledo P25 printer is designed for laboratory environments: the USB-P25 is a compact dot-matrix printers tailored for use with Mettler Toledo instruments, ensuring reliable and compliant printouts. Gjdpfxsxhgdie Ak Uskb

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. Gedpfxjztn Dzs Ak Ujkb - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning Gjdpfx Akjyi Ak As Uokb We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this period, it was regularly serviced by the distributor. The unit features two independent print stations, significantly facilitating and speeding up operation. A head replacement is required for the AEOON. We are including a PRETREAT priming device with the Aeoon printer FREE of charge! We will assist with packaging and transport.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand large-format printer/plotter, the “Roland TrueVIS SG2-300” Item for sale: 1 x Roland TrueVIS SG2-300 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Gsdpfx Akjzzafts Ujkb Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Helios Preisser length measuring machine, measuring machine, measuring device with camera system Gsdpfx Akjiwxwhs Ujkb Length x width: 1350mm x 270mm Accuracy class: Grade 0 Flatness: Actual - 5.9 µ; target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Oce Arizona 460 GT Year of manufacture: 2015 (installed in 2016) Color: 4 colors + 2 white Resolution: 1440 dpi Speed: up to 34 m²/h Variodot: 6 pl - 42 pl Format: 2.5 m x 1.25 m Roll option: 2.2 m In excellent condition, complete with Onyx RIP software. Godpfjzzpf Asx Ak Uekb

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Gjdpfx Akjzzynbe Ujkb Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with 2 EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 66 mm. The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.