Used Diesel Engine Stand for sale (26,366)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition. Bodpfowu D Unjx Aa Dodb

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. Bdsdpfx Aajwu Dbus Djb By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, functionality: fully functional, Year of construction: 2021, Technical data: Type: CPCD50-XC11H Load capacity: 5000 kg (500 mm center of gravity distance) Operation: diesel Engine: StageV Xinchai engine 60kW/2200rpm Lift mast: duplex tower (two-section) Lift height: 3000 mm (maximum fork height) Free lift: 150 mm (construction height does not change) Bodpfx Ajy It Uqea Dedb Machine width: 1510 mm Machine height (tipping frame) 2350 mm Forks: 1 pair 1520 x 150 x 50 mm Aisle requirement (AST): 4960 mm Tilt cylinder: 6o forward – 12o backward Wheels: SE solid tires: front: 300-15-18PR rear: 7.00-12-12PR Steering: rear wheel, hydraulic power steering Brake system: self-adjusting hydraulic drum brake/mechanical lock Transmission: automatic, hydrodynamic Travel speed: with load 23km/h without load 24km/h Hydraulics: 4/4 control valve Lighting: full LED lighting (two front and rear work lights, indicator, brake and reversing light Battery: maintenance-free starter battery Equipment: Horn, indicator, rearview mirror, electric reverser, sprung driver's seat with seat belt for increased comfort and safety Safety equipment: anti-roll bar, handrail, steering knob, automatic start-up prevention Other equipment: Hydraulic fork positioner, sideshifter

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Bjdpfxsyyqz Se Aa Dedb Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: used, Storage location: Supplier Bjdpsynttfefx Aa Dedb

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,403 h, load capacity: 4,000 kg, lifting height: 3,480 mm, fuel type: diesel, mast type: telescopic, construction height: 2,250 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, empty load weight: 6,591 kg, drive type: Diesel, Diesel Forklift Load Center: 500 Bdsdey Iicdepfx Aa Djb ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Superelastic Front Tire Size: 250-15 Rear Tire Type: Superelastic Rear Tire Size: 250-15 Description: In addition to this unit, we offer a wide range of forklifts and warehouse equipment. All of our machines are workshop-inspected and FEM 4.004 certified. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in buying your used equipment, regardless of whether you purchase a vehicle from us. Lease-purchase and financing at attractive conditions are available upon request. We will be happy to provide you with comprehensive and professional advice regarding our vehicles. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, particle filter, full cabin, safety light, interior mirror, exterior mirrors, joystick, wiper, single-pedal, LED, seat,

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW Bsdpfxjwqifkj Aa Djdb - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,883 h, load capacity: 8,000 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Bdodsy Ih D Hjpfx Aa Dob Rear tyres type: Superelastic Rear tyres condition: 40 - 60% Description: 3rd valve, 4th valve, rear work lights, front work lights, roof cover, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 287 h, load capacity: 8,000 kg, lifting height: 5,430 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,080 mm, fork carriage width: 2,380 mm, fork length: 2,500 mm, empty load weight: 13,215 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,210 mm, Diesel Forklift Load Center: 900 mm Fork Width: 180 mm Fork Thickness: 70 mm Mast Type: Triplex Condition: Operational and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 8.25-15 Rear Tyres Type: Superelastic Bdsdsvt Ew Nspfx Aa Dsb Rear Tyres Size: 8.25-15 Description: In addition to this Clark model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire Purchase & Financing options available at attractive conditions. We are also happy to purchase your used forklift outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this C80D900. P.S.: Our master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on a consignment basis in our showroom. Sideshift, fork positioner, Heating, full cabin, full free lift,

Condition: used, Year of construction: 2022, load capacity: 3,500 kg, lifting height: 4,340 mm, total length: 4,150 mm, Hersteller: Toyota Antrieb: Diesel Bedienung: Sitz Tragfähigkeit/Last 3500kg Lastschwerpunkt 500 mm Bsdsy Ihhxopfx Aa Dsdb Lastabstand: 495 mm Radstand: 1700 mm Achslast mit Last vorn/hinten kg 7260/1100 Achslast ohne Last vorn/hinten: kg 1710/3150 Reifentyp - Luft (P), Superelastik (SE), Vollgummi (R): SE Reifengröße vorn 250-15 Reifengröße hinten 6.50-10 Räder, Anzahl vorn/hinten (x = angetrieben) 2x/2 Spurweite vorn mm 106 Spurweite hinten mm 965 Neigung Hubgerüst vor/zurück a/b Grad 6/11 Höhe Hubgerüst eingefahren mm 2115 Sitzhöhe mm 1120 Kupplungshöhe mm 335 Gabelträger FEM/ISO 2328, Klasse/Typ A, B IIIA Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4185 Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4385 Wenderadius mm 2490 Kleinster Drehpunktabstand mm 745 Fahrgeschwindigkeit mit/ohne Last km/h 16,5/17,0 Hubgeschwindigkeit mit/ohne Last m/s 0,37/0,40 Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,45 Max. Zugkraft mit/ohne Last N 17000/10600 Steigfähigkeit mit/ohne Last % 18 Betriebsbremse Hydraulisch Arbeitsdruck für Anbaugeräte bar 147 Ölstrom für Anbaugeräte l/min 65-80 Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 79

Condition: used, Year of construction: 2021, load capacity: 3,500 kg, lifting height: 4,345 mm, total length: 4,220 mm, - Hersteller: Toyota - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand: 495 mm - Radstand: 1700 mm - Achslast mit Last vorn/hinten kg 7260/1100 - Achslast ohne Last vorn/hinten: kg 1710/3150 - Reifentyp - Luft (P), Superelastik (SE), Vollgummi (R): SE - Reifengröße vorn 250-15 - Reifengröße hinten 6.50-10 - Räder, Anzahl vorn/hinten (x = angetrieben) 2x/2 - Spurweite vorn mm 106 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück a/b Grad 6/11 - Höhe Hubgerüst eingefahren mm 2115 - Sitzhöhe mm 1120 - Kupplungshöhe mm 335 Bjdpfx Asy Ihguea Dedb - Gabelträger FEM/ISO 2328, Klasse/Typ A, B IIIA - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4185 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4385 - Wenderadius mm 2490 - Kleinster Drehpunktabstand mm 745 - Fahrgeschwindigkeit mit/ohne Last km/h 16,5/17,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,37/0,40 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,45 - Max. Zugkraft mit/ohne Last N 17000/10600 - Steigfähigkeit mit/ohne Last % 18 - Betriebsbremse Hydraulisch - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-80 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 79

Condition: used, Cutting length 5300 mm, cutting height 2200 mm, motor 5.5 kW, cutting depth 80 mm, free-standing Bdsdpfxoynbm Hj Aa Deb Storage location:

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Bodpfxjy Idb Uo Aa Dedb

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,934 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Bdodpfxjy H Tgqj Aa Deb Technical condition: Good Description: The vehicle will undergo a UVV inspection. Prior to delivery, the machine will receive a service. Sideshift, 3rd valve, heater, full cabin.

Condition: used, Year of construction: 2016, operating hours: 1,091 h, load capacity: 8,000 kg, lifting height: 4,750 mm, fuel type: diesel, construction height: 2,750 mm, gearing type: automatic, Equipment: cabin, Vehicle No.: 044-26 Bsdpfx Aoyvck Noa Dodb STILL RX 70-80 Diesel Hybrid 8-ton Lifting Capacity ??? No 81 of 100 ??? From German Army surplus Original operating hours (like new condition) Year of manufacture: 2016 * Sideshift * Fork positioner * DRUWEN front attachment * Load guard * Fork length: 2,400 mm * Lift height: 4,750 mm * LED work lights * Rotating beacon * Full cabin incl. heating * Front and rear window wipers * 80 kW * 4-cylinder DEUTZ engine (TCD 4.1 / 4,038 cm³ displacement) * Diesel-electric drive * LIKE-NEW CONDITION!!! Viewing available at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained and refunded upon receipt of the certificate of arrival. Company logos or advertising decals on the vehicles may have been digitally altered in the photos. No guarantee is given for the functionality of the additional equipment. All details provided without guarantee – subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and take note of them.

Condition: used, Year of construction: 2017, operating hours: 792 h, load capacity: 8,000 kg, lifting height: 3,300 mm, fuel type: diesel, construction height: 2,750 mm, gearing type: automatic, Equipment: cabin, Vehicle No.: 110-26 STILL RX 70-80 Diesel Hybrid 8-ton Lifting Capacity From Bundeswehr (German Army) stock Original operating hours (in mint condition) Year of manufacture: 2017 * Sideshift * Fork positioner Bsdpfsy H Td Njx Aa Dedb * DRUWEN attachment * Load guard * Fork length: 2,400 mm * Lifting height: 3,300 mm * LED work lights * Beacon * Full cabin including heater * Front and rear window wipers * 80 kW * 4-cylinder DEUTZ engine (TCD 4.1/ 4,038 cm³ displacement) * Diesel-electric drive * EXCELLENT, AS-NEW CONDITION!!! Inspection possible at any time during our business hours, test drive available by appointment! For export sales, a deposit will be withheld. This will be refunded after receipt of the confirmation of arrival. Company logos or advertising decals on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extra equipment. All information is provided without guarantee—subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed properties. Please refer to our general terms and conditions and familiarize yourself with them.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,068 h, load capacity: 15,000 kg, lifting height: 4,090 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 22,000 kg, total length: 4,700 mm, drive type: Diesel, construction width: 2,550 mm, Diesel Forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Linde model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide comprehensive advice on this H150D/600. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer commission sales for your vehicle at our premises. Sideshift, fork positioner, Fork positioner opening range: 770 / 2,305 mm Heater, full cabin, Bodox Ixm Espfx Aa Djdb

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 17,619 h, load capacity: 12,000 kg, lifting height: 3,320 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 2,450 mm, fork length: 2,400 mm, empty load weight: 16,500 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load centre: 600 Fork width: 220 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 12.00-20 Rear tyre type: Superelastic Rear tyre size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr Peter Sawitzki, is happy to offer you detailed advice on this DCG120-6. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and special construction for forklifts from 8 tonnes upwards. We are also happy to display your vehicle for commission sale. Sideshift, fork positioner, Fork positioner opening range: 615 / 2330 mm Heater, full cabin, Bsdou Uwcbjpfx Aa Dedb

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Bdsdpfxey H E Uto Aa Dsb Saw blade bore: 30 mm Lower support: fixed rollers Material support: tilting plastic slats Measuring system: scale Saw head tilt: manual Saw feed: manual Mounting: free-standing Extraction: external extraction Saw beam locking: manual Approx. weight: 1,500 kg Dimensions: 6300 x 1300 x 2900 mm Motor power: 5.5 kW Stock location: Supplier

Condition: excellent (used), Year of construction: 1991, Technical Specifications HBX 360 Distance between centers (mm): 750 Center height (mm): 180 Maximum turning diameter over bed (mm): 360 Maximum turning diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound slide travel (mm): 110 Compound slide width (mm): 110 Type of quick-change toolpost Spindle taper type Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Cross feed range (m/min): 0.0125 to 5.6 Rapid longitudinal feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading (number) (mm); Whitworth thread range (tpi) Brake motor Electrical supply: 380V three phase Overall dimensions (mm): 2000 x 1000 x 1250 Weight (kg): [not specified] Chuck: Manual/Hydraulic 3-jaw Equipment: - 2-axis Heidenhain digital readout - Work light - 3-jaw manual chuck - Quick-change toolpost Bdjdey H Dxwepfx Aa Dob - Foot brake

Condition: used, Year of construction: 2024, operating hours: 322 h, machine/vehicle number: S65XCD-1359, mast type: telescopic, fuel type: diesel, Empty weight: 11.523 kg Lifting capacity: 454 kg Working height: 2.200 cm Dimensions of cargo space: 976 x 249 x 281 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Max. horizontal reach: 1650 m Please contact PFEIFER GROUP for more information Bodpfxsuythtj Aa Dsdb

Condition: used, Year of construction: 2007, operating hours: 3,596 h, machine/vehicle number: G320-00-6364, fuel type: diesel, Empty weight: 31.200 kg Lifting capacity: 1.000 kg Working height: 3.400 cm Dimensions of cargo space: 702 x 298 x 363 cm Front tyres / undercarriage remaining: 40 Bdjdpfx Aoy Hz R Roa Dob Rear tyres remaining : 40 Tyre brand: Wide Wall Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,743 h, load capacity: 3,000 kg, lifting height: 5,950 mm, fuel type: diesel, mast type: simplex, construction height: 3,590 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Description: Dealers or export only Bedey Hyvrepfx Aa Djdb Sideshift, 3rd valve, half cab,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,400 h, load capacity: 3,500 kg, lifting height: 5,200 mm, free lift: 1,790 mm, fuel type: diesel, mast type: triplex, construction height: 2,370 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,868 kg, drive type: Diesel, Diesel forklift Load centre: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Bdodsy Hynzspfx Aa Deb Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 23x10-12 Rear tyres type: Superelastic Rear tyres size: 21x8-9 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our machines are workshop serviced and FEM4.004 inspected. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you are not buying a vehicle from us. Leasing & financing options available upon request at attractive terms. We are happy to provide competent and comprehensive advice about our vehicles. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, soot filter, full free lift, safety light, interior mirror, joystick, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 ISO class: Terminal West Bsdpfxsy Hylte Aa Dedb Mast type: Duplex Transmission: Clark 13.7HR28316 Condition: Ready for operation and fully functional Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Sideshift, fork positioner, Exhaust purifier