Used Demag 2000 for sale (496)

Condition: good (used), Year of construction: 1987, machine/vehicle number: 33, Offer 25003 Technical specifications (approx.): - Load capacity: 250 kg - Outreach: 6.0 m - Hook height (approx.): 5.0 m - Wall bracket height (approx.): 820 mm - Flange width (approx.): 400 mm - Hole pattern / hole spacing (approx.): 720 x 325 mm Gujdjw I S Hkjpfx Afish - Slewing radius (approx.): 180° Hoist Manufacturer: DEMAG Type: PK 2 L Machine No.: 5710310 Year: 1986 Technical data: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operated via handheld remote control - Jib arm slewed manually - Total weight (approx.): 300 kg - Transport length (approx.): 6.5 m

Condition: good (used), Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: Mannesmann Demag, Gearbox Crane Gearbox -Type: AF08-MTranslation ratio: 36.9:1 -Motor: without electric motor (can be supplied at an additional cost) -Input- shaft: Ø 24 x 25 mm Guedpfexb Rkmex Afish -Output hollow shaft: Ø 41/45 x 155 mm -Dimensions: 210/200/H360 mm -Weight: 33.5 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD396, DEMAG KBK Crane Ceiling Crane Runway with dimensions approx. 19.5x7m (2x 7m bridge) Payload / Lifting Capacity: 2x 250 kg - 0.25 t Technical Data of the System: Runway made from Demag KBK2 rails, one side with KBKII-R rails featuring integrated power feed Gusdsxdvn Aopfx Afieh System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. including 2 bridges, each 250 kg including 2x 250 kg Demag DC chain hoists Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125 kg to 1600 kg Please inquire about your crane runway with required capacity and dimensions, non-binding.

Year of construction: 1992, condition: good (used), Compressor unit consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min 3,000 rpm 45 kW Digital display Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³/min Pressure: 75 bar 3,000 rpm 45 kW Refrigerated compressed air dryer Manufacturer: MANNESMANN DEMAG Model: AD160AB Year of manufacture: 1993 Oil-water separator Model: ÖWAMAT 6 Goderi I Rrepfx Afisuh Compressed air receiver Manufacturer: LOHENNER Model: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Operating pressure: 11 bar 91025ä

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Shot weight: 2,560 g/PS Gjdpsxauycjfx Afisuh Control: NC 4 Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 - 4 core pulls

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Guodpfx Afovzhhtsioh Mains connection 380 - 415 v Uc: 24 v

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Gedpfx Afexc Inxoijuh Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: excellent (used), functionality: fully functional, Also take a look at my other offers. 2 units! Identical design. Price: 1 unit €6,900 net, 2 units €11,900 net. Ideal for mounting on a single-girder overhead crane (underslung), complete with all control systems and DEMAG DST pendant control. Hoist type: DEMAG DH410 H12 Year of manufacture: 2002 Drive group: 4M Gusdpfxsv Uvm Rs Afieh Reeving: 4/1 Load capacity: 4 t (5 t) Hook travel: 6 m Main lift: 8 m/min Creep lift: 0.8 m/min Both units are in very good condition and come complete with DEMAG trolley drive with 2 speeds. Price per unit when purchasing both: €4,500 net each. Personal delivery within Germany possible, €0.70 per km from 99734 Nordhausen (for purchase of 2 units). On request: 2 bridge travel motors for end carriages, DEMAG KBF90 type with AF gearbox, 2 speeds, available to match! From a large DEMAG warehouse stock of hoisting and travel motors. Also take a look at my other offers.

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Gedpfx Afshvpzhoisuh Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Condition: good (used), functionality: fully functional, Year of construction: 2008, load capacity: 125 kg, -KOM 3164- Offered here is a DEMAG industrial hoist. The hoist can lift loads of up to 125 kg. In addition to the hoist, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and the hook block. Dimensions can be found in the last image. Type: DCM PRO 1-125 Year of manufacture: 2008 Number of load strands: 1 Chain: 4.2 x 12.2 RDC Hook travel: 2.8 m Guedjxcny Iepfx Afijh Motor: ZNK 71 A 8/2 Protection class: IP 55

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system Gujdow Uy Uiepfx Afieh -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Condition: good (used), Year of construction: 1965, weight max. 250 kg throat 2.500 mm height 3000 mm Base plate 600 x 600 Column-mounted slewing jib crane from DEMAG Gusdpfx Aevylh Iofioh Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 25,500 h, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580 mm, displacement volume: 442 cm³, injection pressure: 2,100 bar, injection weight: 393 g, overall weight: 11,000 kg, General Data Year of manufacture: 2009 Weight: 11,000 kg Dimensions (L × W × H): 6.7 × 1.7 × 2.2 m Control system: NC5 Operating hours: 25,500 h Clamping Unit Clamping system: 210/... Clamping force: 210 t Gjdpfx Aoxc Ifwefijuh Platen dimensions (H × V): 855 × 860 mm Tie bar spacing (H × V): 580 × 580 mm Mold height (min.–max.): 340 – 690 mm (max. increased) Opening stroke: 575 mm Maximum daylight: 1265 mm Ejector stroke: 165 mm Ejector force: 60 kN Ejector coupling: mechanical (automatic engagement, manual disengagement) Injection Unit Injection unit type: …/1000 Screw diameter: 50 mm Screw L/D ratio: 20 Injection volume: 442 cm³ Shot weight: 393 g Specific injection pressure: 2,100 bar Wear-resistant screw; bimetallic cylinder; standard L:D Check valve (RSP), 3-piece, ring type Additional Equipment Extended maximum mold height (min. unchanged, max. increased) Mold opening and ejector function only with safety guard closed Programmable injection pressure before screw (multi-point curve – 6 support points) Injection, hold pressure, pre-injection pressure, dosing – adjustable Manual pressure relief for 2 hydraulic core circuits on the moving platen (shared valve)

Condition: excellent (used), functionality: fully functional, DEMAG slip ring motor 36/24 S4 GÜ Fine input FG36 19K or Fine input 72 DFg overhauled or Hoist motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse Godewafidopfx Afiouh

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. NEW, unused Gedpfxeq U Iito Afisuh Item location is 75053 Gondelsheim See pictures

Condition: good (used), functionality: fully functional, -KOM 3161- Offered here is a load crane from Demag. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, which consists of the chain and hook block. The dimensions can be found in the last image. Unfortunately, the type plate on the drive unit is no longer present. Gsdpfxoxcnvpo Afiouh

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation Guodpfx Afsw Uxt Rjish -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/piece

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, overall weight: 21,000 kg, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Gujdpfx Afexc Idtsioh Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Gedpsmqf Nbefx Afijuh Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag load crane. The load crane has a lifting capacity of up to 80 kg. In addition to the crane, you will receive the corresponding motor unit, including a chain hoist consisting of a chain and hook block. The dimensions can be found in the last picture. Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Gusdpfxjxcnmns Afijh Protection class: IP 54

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm Gsdpjw Uw Tcefx Afieuh -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Year of construction: 2006, condition: used, machine/vehicle number: BSxx, Demag roller trolley chassis crane trolley trolley EU RU 11 Payload 1350KG Width adjustable: 10-22cm - 50 pieces 95 euros Gusdporfwncsfx Afieh 22-30cm - 6 pieces 115 euros Used Item location is 75053 Gondelsheim Shipping possible via DHL package, large quantities via shipping company See pictures

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures Godperft Nzofx Afiouh

Condition: good (used), Year of construction: 1977, machine/vehicle number: TH2001/0171-7548 /// RES !, DEMAG KBK Crane System, Crane Runway with dimensions approx. 15x7m (7m bridge) Load capacity / Lifting capacity 500 KG - 0.5t Technical data of the system: Crane runway made from Demag KBK1+2 rails System is delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, etc. Includes 500kg Demag DK chain hoist (not as pictured DC model) - lifting height approx. 3.5m (chain hoist is newer than the crane) Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities 125kg - 1600kg Please inquire about your crane runway, specifying load capacity and dimensions, without obligation. Gusdpfsvdndaex Afish

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m Gjdju I U Anjpfx Afiouh (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.