Hoist motor 28/12K4P

Demag

Condition: excellent (used), Year of construction: 2012, Wittmann TP+D-S-2, 140,SO-C, S,X- TVEBBH2M_04_00 (2012) 1\. Overview & Model Decoding 1. Manufacturer: Wittmann (Austria) 2. Year of Manufacture: 2012 3. Model Series: Tempro Plus D (TP+D) – high-end temperature controller equipped with a touchscreen interface 4. S-2: S (Single) = single-circuit configuration / 2 = dual connection configuration or generation 2 module 5. 140: Pressurized water medium with a maximum operating temperature of up to 140 °C 6. SO-C: Solenoid valve / Option C cooling configuration Bodpfx Aks Ah E Adjnsww 7. S: Standard pump and heating size configuration 8. TVEBBH2M_04_00: Internal PCB assembly or firmware system part code from the rating plate 2\. Main Technical Specifications (Tempro Plus D 140 Series) 1. Heat Transfer Medium: Pressurized water (up to 140 °C) 2. Heating Capacity: Typically 9 kW or 12 kW (depending on the exact internal configuration) 3. Cooling Capacity: Approx. 40 kW – 60 kW at 130 °C 4. Pump Performance: 5. Max. Flow Rate: Approx. 40 – 60 l/min 6. Max. Pump Pressure: Approx. 4.5 – 6.0 bar 7. Power Supply: , 8. Control System: Microprocessor Touchscreen Display (Tempro Plus D visualization unit) 9. Communication: Injection molding machine interface (Serial/CAN-bus/Ethernet/Wittmann B2/C2 protocol)

Condition: as good as new (ex-display), For sale Bsdpfx Akjh Up Tbonoww Hoist motor used/reconditioned for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: good (used), Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow rate: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm Bsdpfswu Axlsx Akneww -Weight: 1032 kg

Condition: used, Guest Plate, Adapter Plate / Mounting Plate for Demag 330-Ton Injection Moulding Machine – Used Machine Manufacturer: Demag Bsdpfe Ahya Ejx Aknoww For sale is the factory-made, precision-machined guest plate (adapter plate / mounting plate) shown in the photos, in excellent condition. It is specifically designed for Demag 330-ton (330T) injection moulding machines. Overall Dimensions: Width: 1040 mm Depth: 950 mm Height: 100 mm Weight: 770 kg

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned for a Demag P hoist Bwodpfxjh Uqcce Aknew NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: good (used), functionality: fully functional, Column crane, manufacturer Demag, type ZSL 1600-3, year of manufacture 2001, load capacity 1600 kg, with Demag chain hoist. Overall height approx. 3 m Lifting height approx. 2.5 m Outreach approx. 3 m Bwsdpfx Ako Ahrw Rsnjw Disassembled, available from stock.

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Bedpezd Urtjfx Aknjww Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned for a Demag P hoist Bedpfxoh Uqb Ro Aknsww NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) Bodpfxeyzylvs Aknsww \+ 2x Magnetic platten

Condition: used, 1,450 rpm, 28.7 kW at 2 bar, 580 m³ volume flow 37 kW electric drive Bjdpjzr H Trsfx Aknsww

Condition: good (used), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Solenoid valve -Type: CPE18-M1H-5J-1/4 -PN: 2-10 bar -Number: 28 valves available -Price: per piece -Weight: 0.1 kg/piece Bsdpjb Nktusfx Aknoww

Condition: used, Year of construction: 2022, overall weight: 300 kg, load capacity: 125 kg, Used pillar-mounted slewing crane from DEMAG, type KBK. The crane has a load capacity of 125 kg, an outreach of approximately 2,900 mm, and an overall height of approximately 4,000 mm. The lower edge of the jib is at approximately 3,500 mm, and the highest hook position is at approximately 3,250 mm. The system is equipped with a Demag DC-PRO 1-125 1/1 H5 V8/2 electric chain hoist, manufactured in 2022, with a load capacity of 125 kg and a lifting height of 5.0 m. The chain hoist has two lifting speeds of 2.0 and 8.0 m/min, FEM class 4m / M7, and a power rating of 0.18 kW. In addition, the system includes a mechanical Rieder box handling gripper with a load capacity of 45 kg and a GROHMANN ENGINEERING MP02 handling gripper with a permissible load of 45 kg. Condition: used, stored in disassembled condition. Bwodo Agxf Depfx Aknjw

Condition: used, Year of construction: 2012, machine/vehicle number: DCM-Pro 1-125 1/1 H2,8 V16/4, overall weight: 240 kg, load capacity: 125 kg, Used Demag slewing jib from the KBK/KBK-AL system with KBK I 3M-1 jib profile. The existing jib has an outreach of approximately 3,000 mm and is designed for manual slewing. A crane column is not part of this system; the jib with slewing bearing mount is included. The system is equipped with a Demag DCM-Pro 1-125 1/1 H2.8 V16/4 electric chain hoist, manufactured in 2012, with a lifting capacity of 125 kg and a lifting height of 2.8 m. The hoist features lifting speeds of 4.0 and 16.0 m/min and is FEM class 4m / ISO class M7. Condition: used, stored disassembled. Bwjds Agxd Aspfx Aknsw

Condition: used, Proximity switch, proximity sensor Bwedpfx Aeb A S Hlsknsw -Manufacturer: Festo, proximity switch unused Ovp -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece

Condition: like new (used), functionality: fully functional, 2 x Demag drive motors with reduction gear Type ZBA 71 A4 Bjdpfx Akj Ah Hgljneww New and unused.