Used Deckel Maho Dmu 70 for sale (333)

Condition: good (used), Year of construction: 2003, operating hours: 14,807 h, overall weight: 3,545 kg, input voltage: 400 V, year of last overhaul: 2015, Operating hours approx. 02/2025: Control on: 14807 h, machine on: 76429 h, program run: 39412 h 3D path control Universal milling head with controlled B-axis SK 40 Shelf magazine with 60 magazine spaces SK 40 Infrared measuring probe, Heidenhain TS 641 NFS server Chip conveyor, Blechtechnik GmbH Cooling with extended media line, Bürener Maschinenfabrik GmbH The blue computer terminal in the picture in front of the machine does not belong to the machine Gsdev Ab Rkjpfx Afieuh The machine is still in use and can be viewed during our opening hours. The SK40 tool holders can be purchased, the tools are not sold. Sale from location without warranty and return. Dismantling and removal must be organized by the buyer.

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Guedpfx Aevtnm Hsfijh Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2001, Deckel Maho DMU50 Evolution Control: Heidenhain iTNC530 Year: 2001 x-travel 500 mm y-travel 420 mm z-travel 380 mm control iTNC 530 Heidenhain power capacity - main spindel 25 / 35 kW turning speeds 20 - 18.000 U/min Torque (40 / 100%) 130 / 87 Nm tool taper HSK 63 Feed speed 20.000 mm/min rapid traverse X-axis 50 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min tools in tool magazin 100 positions max. tool length 200 mm max. tool weight 6 kg max. tool diameter 50 mm surface area 500 x 380 mm center bore 30 H6 T-slot - distance 63 - 14H7 mm swivelling range 0° / +180° (B-Achse) swivelling range 360° / 0,001° (C-Achse) max. table load 200 kg Guedpfjxggl Djx Afish Rapids C - Axes 33 min -1 rapid traverse B-axis 26 min -1 total power requirement 38 kVA weight of the machine ca. 6,0 t Accessories/options: - Blum tool measuring system - Swarf conveyor - Through spindle coolant - Documentations Under power in our warehouse!

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm Gjdpfxsxfcqyj Afieuh This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Gedsw Rrcqepfx Afisuh Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: excellent (used), Year of construction: 2005, CNC machining center DECKEL MAHO DMF 220 Year: 2005 Control: Siemens 840 D Technical data: Travel (axes): X: 2200 mm Y: 560 mm Z: 720 mm Speed range: 20–12,000 rpm Table size: 2600 x 600 mm 30 tool magazine positions SK 40 Gusdpfx Ajxm Umpsfijh

Condition: ready for operation (used), operating hours: 28,461 h, functionality: fully functional, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Gedpfoxm Tu Eox Afisuh Loading height: 850 mm MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: used, Year of construction: 2005, Travel: X-885 mm, Y-600 mm, Z-600 mm Spindle speed: 0 - 18,000 rpm Spindle mount: HSK63 Gedpfx Afexl Icusijuh NC rotary table: 750 mm B-axis: -10 / +110 degrees tool magazine: 30 seats Internal coolant supply (IKZ): 40 bar chip conveyor: , probe: Heidenhain Control: iTNC530 Heidenhain operating mode: 4

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm table surface area 1250 x 600 mm Gedpfxsw Hybus Afijuh table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 rpm max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Control Unit Brand Siemens Model Sinumerik 810D Powerline Main Drive Spindle speed range 10000 rpm Guedpjxnr Hisfx Afish Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 Gusdpfx Afexni Uqsish x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: excellent (used), Year of construction: 2002, CNC MACHINING CENTER DECKEL MAHO DMC 64 V LINEAR 2002 Heidenhain iTNC 530 Technical Specifications: X-AXIS MOVEMENT: 640 MM Y-AXIS MOVEMENT: 600 MM Z-AXIS MOVEMENT: 500 MM Gjdpjwgk Dgofx Afieuh SPINDLE SPEED RANGE: 12,000 RPM TOOL HOLDERS: SK 40 OUTER LENGTH: 850 MM OUTER WIDTH: 630 MM MAX. TABLE LOAD: 600 KG

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 Guedpfx Afew A I Uueijh range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: good (used), Year of construction: 1987, functionality: limited functionality, Universal tool milling machine Deckel Maho FP 4 A Manufacturer: Deckel Maho DMG Type: FP4A Control unit: Heidenhain TNC 355 Incl. handwheel Travel paths x-path 485mm y-path 385mm z-path 380mm Table surface approx. 800 x 460mm Speed range - milling 63 - 3,150 rpm Drive power - milling spindle 4.4 kW Tool holder SK 40 Machine weight approx. 1.8 t Space requirement approx. 2.0 x 3.0 x 2.0 m Accessories Chip tray Coolant system Rubber mats The price is net. Legal. VAT 19% is added. Gsdpevmq U Tofx Afieuh We are happy to answer any further questions you may have. Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please ask. We look forward to hearing from you.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 Guedowtft Nspfx Afieh X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Gjdjxnd I Sspfx Afieuh Number of station 20 Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 Guodpoxni T Tofx Afish x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Godpfx Afjuqmvkjieuh Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 20, control type: CNC control, number of axes: 3, For sale is our used but maintained and good condition Deckel Maho DMC635 machining center due to machine park upgrade. The machine is available for inspection and can be put into production immediately. The milling machine has mainly been used in single-shift, small batch production. Upon request, it can be sold with 20 tool holders and a vise. Year of manufacture: 2008 Gujdpexl Ubdofx Afioh Operating hours: 17,641 h Control: Sinumerik 840D Table clamping area: 790 x 560 mm X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Spindle speed: 0 - 10,000 rpm Number of controlled axes: 3 Through-spindle cooling: no Spindle taper: SK40 Tool changer: yes Tool magazine capacity: 20 Rapid traverse: 30 m/min Dimensions (L×W×H): 3300x2905x2705 mm

Condition: good (used), Year of construction: 2002, Travel paths X/Y/Z: 560/560/510 mm Max. spindle speed: 18,000 rpm Tool holder: HSK 63A, 40 positions Table clamping surface: 400 x 400 mm Control: Siemens 840D Guodpjxlznksfx Afish

Condition: used, Year of construction: 2015, Machine type: -> 5-axis machining center Spindle: -> Tool holder HSK63 -> Speed 18,000 rpm Drives: -> Ball screw drives Linear axes: -> X-axis 2,600 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 positions Table: -> Integrated rotary table Operating data: -> Spindle hours approx. 21,121 -> Operating hours approx. 38,989 Machine/asset does not include any product-related tool/fixture or gripper (robot) Gujdpjxgpdcofx Afish

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Godpfexllprox Afiouh Additional Equipment 40 bar IKZ This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, General Data Measurements width 7000 Measurements depth 5000 Machine weight 3400 Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 8000 Number of axis 4 Movement X-Axis Movement 600 X-Axis Working Feed 60000 mm/min X-Axis Rapid Traverse 60 m/min Y-Axis Movement 560 Y-Axis Working Feed 60000 mm/min Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 560 Z-Axis Working Feed 60000 mm/min Z-Axis Rapid Traverse 60 m/min Table Table load 350 kg Tools Slots in storage 90 Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69871-SK40 Media Chip conveyor Yes Additional Equipment Coolant Type/Content: Emulsion (internal & external) / approx. 1100L Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command Machine Accuracy: VDI / DGQ 3441 Renishaw Measuring Probe Tool Breakage Detection Drum filter Pallet Sequential Operation Enclosed Work Area Enclosure Gusdpfjxllp Eox Afijh Network Connection Technical Documents and Layout Plan available This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 76,968 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 28000 Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 560 mm This 3-axis DECKEL MAHO DMC 105 V linear was manufactured in 2006. It's a Vertical Machining Centre designed for precision and efficiency in complex milling operations. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 105 V linear machine we have for sale. Contact us for more information. Guodpfx Aexirigofioh Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, operating hours: 88,546 h, Control Unit Brand SIEMENS Godjxg Umvopfx Afijuh Model 840D Main Drive Number of axis 4 Movement X-Axis Movement 800 mm Y-Axis Movement 710 mm Z-Axis Movement 710 mm This 4-axis DECKEL MAHO DMC 80 H horizontal machining center was manufactured in 2001. It features a SIEMENS Sinumerik 840D CNC control, a spindle speed of up to 6000 RPM, and a 40-position tool changer. Additional highlights include dual 630 x 500 mm pallets, SK50 spindle taper, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 80 H horizontal machining center. Contact us for more information about this machine. Application Types Milling