Used Deckel Fp 2 for sale (712)

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm Dksdpsclli Uofx Ac Noh movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 Dkedpfxefnry He Ac Noh spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: excellent (used), jaw width: 160 mm jaw height: 50 mm span width: 310 mm Dsdpfx Acsd Hyfwo Nokh total height: 170 mm

Year of construction: 1988, condition: used, x-travel 500 mm Dkedpfsqpl Uqex Ac Njh y-travel 400 mm z-travel 400 mm digital readout Heidenhain 3 Achsen spindle taper SK 40 spindle turning speed range 50 - 2500 U/min table-size 650 x 375 mm weight of the machine ca. 1,5 t dimensions ca. mm

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. Dkjdsv Dxzcepfx Ac Njh FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm Dkedodzqb Sjpfx Ac Nsh - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base Dedpfjiy Ekvox Ac Nokh - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Djdpfsdzp T Esx Ac Nskh Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically Dkedpfx Acepn Rgve Noh the state of the art of the year of construction.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: Dkjdpfx Acor En Dyj Njh - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: Dkodopmrpxepfx Ac Noh MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. Dedpfx Acsw A Apye Njkh control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Dksdetqqllepfx Ac Neh Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, Dodpfxowwwr Ee Ac Njkh various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, Dodjwl N R Nspfx Ac Nskh various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW Dodpfx Aotqqtbsc Nokh total power requirement 20 kVA weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: not inspected (used), Please see technical details on photo. Dkedpfx Ajhvzxzec Nsh

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Dodpfx Acjwffyme Njkh Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Dksdpfx Aowffzkoc Neh Vertical travel 380 mm Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2

Condition: used, machine/vehicle number: 2806-0743, x-travel:800 mm y-travel:550 mm z-travel:500 mm table surface area:(B x T )1000x550 mm spindle turning speed - stepless:0 - 5000 U/min feed speeds - directly programable:2- 6000 mm/min rapid traverse:6,0 m/min quill stroke:80mm mm Tool bore:SK40 total power requirement:12 kW weight of the machine ca.:3,9 t Dkodpfx Ascxxngsc Njh dimensions of the machine ca.:(LxBxH) 2200x2800x2400 mmxmmxmm Deckel FP5 NC Universal Milling Machines - CNC - Swivelable left or right) 90 ° & Tilting Vertical Spilndle Head - Rigid Fixed Table: 1100 x 550 mm (Max. Load 450 kg) - High RPM on Both vertical and Horizontal Spindles - Powerful 9,0 kw AC drives for Main Spindle - Equipped with Electronic handwheel and handheld rapid travel attachement - Dialog 4 - 3D Path Control System. - Seperate Power cabin, Chip tray

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Dsdpfxewtg Ibo Ac Nokh

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 Dksdjcxxwaopfx Ac Njh The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 1986, functionality: fully functional, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC rotary table 630 mm Spindle taper SK 40 Dedpfowu Dfmox Ac Nskh Spindle speeds 18 - 6300 rpm DIALOG 4 control Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Max. table load 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Machine weight approx. 4.6 t Dimensions L x W x H 3.8 x 2.24 x 2.35 m Accessories: LNS Fox ws 2-1500 filter unit with 2 new filters in box, 2 cabinets full of tools This machine is stored at our facility.

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible. Dkodpfx Acjwzbblj Neh

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m Dkedpfx Ascxxrijc Nsh The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray