Used Deckel Fp 2 Nc for sale (689)

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: Dksdpfeygia Esx Al Asu - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Dksdpfxez Indhs Al Asu Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: good (used), functionality: fully functional, Internal article number: 26092 Dkjdpfxsz Ha Eue Al Asu Original Deckel high-speed milling head SK40 Compatible with Deckel FP1 / FP2 Well-maintained original condition! This high-speed milling head comes from an educational institution and is in good condition.

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Dksdpfx Alscxxyho Asu Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Dkedpfx Ajrhzcuel Aou

Condition: excellent (used), Used Deckel FP 1 Aktiv tool milling machine. The machine is in good technical condition and ready for operation. It has a robust construction and the necessary functions for performing precise milling operations. The machine is equipped with manual and automatic feeds, as well as automatic feeds controlled by a simple NC system. Net price: 23,000 + VAT Spindle taper: 40 Travel: X: 300 Y: 160 Z: 340 Spindle speed: 63-2000 rpm Extendable quill Dsdpfx Aezy Rwwjl Aeku

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Dedpfx Aezx Ep Sjl Aeku Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Dsdpfezxwz Tjx Al Aeku Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Dkodpjihp U Defx Al Asu Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: 500 mm Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: Djdpfsyalcpex Al Aeku 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: used, x-travel 400 mm y-travel 315 mm z-travel 400 mm control Dialog 4 Djdpjzz S Rnjfx Al Ajku spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 1994, condition: excellent (used), Deckel milling machine FP 2A with Dialog 12 control system + vise. Dkjdpfsfgmbdex Al Asu

Condition: used, There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible. Dodpfxez H Utao Al Asku

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Dedpewrdu Aofx Al Aeku Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Deckel FP4M Overhauled by FPS in 2021 Dedpfezxgy Ssx Al Aoku + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover + Operating manual Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg The machine comes from a training workshop and is in very good condition.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Dodpfxor En Dyj Al Ajku Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: excellent (used), Year of construction: 1987, operating hours: 800 h, Deckel milling machine FP 5 A Contour, in excellent condition, with numerous accessories. It has not been in operation for the last 20 years. Dsdsz Afdwopfx Al Aeku

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW Dedoqpl Uuepfx Al Aoku weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: Dodpfx Aswhk Ubsl Aoku - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Dsdpfxeq A Icqo Al Asku

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4 Dsdpfx Alehvz Iie Ajku Individual sales upon request.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm Dsdpfx Aszrn Tyel Aeku >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, machine/vehicle number: 46589, This universal tool milling machine with accessories, type: FP2, will be auctioned online as part of our industrial auction / machine auction due to the business closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment. Dkjdpez Nc Rfjfx Al Aeu You can find this and many other items on our platform.

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! The machine comes from the prototype construction department of Castwerk Technologies. Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: Dkedjzy U E Eepfx Al Aju approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2010, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - very good condition Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 18,000 rpm Spindle mount: SK40 tool magazine: 60 seats chip conveyor: . probe: Hexagon electric handwheel: Heidenhain operating mode: 4 Tool measurement: Blum Laser Internal coolant supply (IKZ) and chip removal package: 40 bar Dkedpfx Alozz Aizo Aju High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50