Used Deckel Dc 30 for sale (666)

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Kdodpfxjzc Dzis Ahbsu Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Includes Heidenhain probe. Tool holder: SK 40. Kodpfx Ahsz Damtobedu The zero-point clamping plate shown on the table will be removed and is not included in the sale.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. Kdsdpfx Aoz Atpnehbju For self-collection. Details see attachment and available upon request. The following parts have been removed: Axle control module PCU Control unit for cooling system

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: Kodpfoy Iwdpjx Ahbjdu 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, feed length X-axis: 800 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, controller manufacturer: Siemens, controller model: 840D, spindle nose: SK-40, number of slots in tool magazine: 60, Deckel Maho DMC 80 U vertical machining center, year of construction 2003. Kdedpfx Ahez Hxryebju Фрезерный станок с ЧПУ Deckel Maho DMC 80 U 2003 года производства. Находится на предприятии в г.Минске, подключен. Хорошее техническое состояние, стойка Siemens 840D. Ходы осей: X 800 мм / Y 700 мм / Z 600 мм. Магазин инструментов на 60шт. конус шпинделя SK-40. Двухпаллетная система

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Ksdpszlnmmefx Ahbedu Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system Kdjdpfxez Sqq To Ahbju • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530, 3D-Path / 3D-Contouring • Rapid traverse: 30 m/min Kjdpfx Ahezv Sylobjdu • Main drive: AC 13/9 kW • Tool taper: ISO 40 / SK40 DIN 69871 • Tool clamping: DIN 69872 • Tool changer: 20 positions, SK40, double gripper • Table size: 1,200 × 560 mm • Measuring system: Direct measuring system X/Y/Z with air purge • Coolant / air blast: Switchable via M-function at spindle nozzles • Operation mode: Process monitoring with manual intervention • Software: Smart TNC incl. DZF and engraving cycle • Data communication: DMG Netservice Euro ISDN • Operating hours: 24,915.5 h (control ON) / 12,002.7 h (spindle ON) Technical Specification Taper Size ISO 40

Year of construction: 1980, condition: excellent (used), Milling spindle head Manufacturer: DECKEL, for machines type: LB2 and LB3, year of manufacture approx. 1980 Spindle mount: ISO 40 Head can be swiveled +/- 45 degrees on both sides. Kjdpfshvz Dxsx Ahbsdu In very good condition.

Condition: excellent (used), Year of construction: 1996, Maho MH 700 M Tool milling machine Deckel Maho MH 700 M with Heidenhain TNC 116 control, built in 1996, in SUPER condition. From the testing department of Castwerk Technologies. CE compliant!! Technical data: Year of construction: 1996 Universal table Speed: stepless up to 5000 RPM Feed rate: stepless in 3 axes from 0 to 3000 mm/min Travel ranges X/Y/Z: 700/450/450 mm Rapid traverse rates x/y/z: 5 / 5 / 4 m/min Table surface: 750 x 450 mm Table load: 450 kg Vertical quill stroke: 80 mm Vertical quill and horizontal quill - SK40 Hydraulic clamping system Weight approx. 3400 kg Space requirement approx.: 2.5 x 2 x 3 m Drive power: 12 KVA Accessories and equipment: Heidenhain TNC 116 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Kjdpfxjz Indns Ahbedu Spindle brake Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Deckel Maho MH 700 M with a Heidenhain TNC 116 control. This universal milling machine is in very good original condition. It comes from a company where it was only used to a limited extent for training purposes. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel Maho has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Deckel Maho on site under power. You can find more milling machines from renowned manufacturers on our website.

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics Ksdpfezx R Awex Ahbedu -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: used, Year of construction: 2010, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D 3D ShopMill Siemens turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm Kodez I Dy Eopfx Ahbedu change time 1,6 sec change-time chip to chip 7,0 sec rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours - only 13,700 power-on hours

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Kodpfxex Sdxzj Ahbedu Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Condition: refurbished Machine type: milling machine If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2001, functionality: fully functional, DECKEL MAHO DMU 60 T – CNC Universal Machining Center – 2001 Manufacturer: DECKEL MAHO Model: DMU 60 T Year of manufacture: 2001 Condition: Used CNC control: HEIDENHAIN Machine type: CNC Universal Machining Center Technical specifications Machine dimensions (L × W × H): 2,900 × 2,200 × 2,900 mm Machine weight: approx. 6,500 kg CNC control: HEIDENHAIN Rotary table Automatic tool changer Enclosed machining area Accessories Tool holders and cutting tools shown in the photographs (inclusion in delivery to be confirmed) Rotary table Automatic tool magazine Description Used DECKEL MAHO DMU 60 T CNC universal machining center, manufactured in 2001, equipped with HEIDENHAIN CNC control and a rotary table. The machine is suitable for universal milling, toolmaking, and precision machining applications. Kdodpfjz R D R Dox Ahbsu The machine is offered with photographic documentation. Further technical details, availability, and the scope of delivery can be provided upon request.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Kodozz Hk Njpfx Ahbodu Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 14,085 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details. Kedpfszza Easx Ahbjdu - Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h- Electrical Connection: 230V / 1A (Auxiliary)- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Kdodpfez Dp Dbox Ahbsu Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale: a DECKEL FP1 tool milling machine with a very extensive range of accessories and the original operating manual. The machine is in very good condition and is fully functional without any limitations. Kodpozr E D Njfx Ahbjdu Price plus VAT. Collection from Ahrensburg. Sale only within Germany.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Deckel FP4M Overhauled by FPS in 2021 + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover Kjdpfx Aezxgy Sehbjdu + Operating manual Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg The machine comes from a training workshop and is in very good condition.

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system Kedpfswf Rgfex Ahbedu - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, Year of construction: 2008, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment. Kdedpfxez R Uw Ao Ahbeu

Condition: used, Year of construction: 2000, X 1080mm Y 710mm Kjdpfx Asz Sqanohbedu Z 710 mm

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Ksdjz Dku Uepfx Ahbodu Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Ksdpfxszd Agrs Ahbedu Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. The machine can be disassembled by the buyer. Kdodpoz E Dl Nefx Ahbeu No direct sales to countries outside the EU. We will not handle customs clearance.