Used Da 160 for sale (9,034)

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 150 mm, jaw width: 160 mm, total length: 700 mm, total width: 160 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Hodpfxjym T Ndj Ahvefd Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 160 x 150 mm Weight: 80 kg External reference: Lot 46 / Osthoff

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 min. module 0,5 weight 4,5 t total power requirement 10,5 kW Equipment/accessories: - Milling arbors Hfodpfxjvzhfrs Ahved - Clamping devices - Documentation

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm Hfjdpfsvzhf Ssx Ahvod min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: ready for operation (used), functionality: fully functional, center height: 160 mm, center width: 750 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, workpiece diameter (max.): 375 mm, machine/vehicle number: 160378, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified timeframes: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Hjdpfx Aeym Nkkohvsfd Centre height: 160 mm Centre distance: 750 mm Maximum workpiece diameter over bed: 375 mm Maximum workpiece diameter over cross slide: 180 mm Spindle speeds: 38 to 3,000 rpm Spindle taper: Morse 5 Spindle bore: 40 mm Collet capacity: 24 mm Fine feeds longitudinal and cross: 0.015 to 0.21 mm/rev Longitudinal and cross feeds: 0.025 to 0.35 mm/rev Cross slide travel on bed: 750 mm Compound slide travel: 120 mm Cross slide travel: 215 mm Centre height above tool slide: 32 mm Tool section: 20 x 20 mm Tailstock quill taper: Morse 3 Quill travel: 120 mm Lateral adjustment: +/- 10 mm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,000 x 1,500 mm Weight: 2,500 kg EQUIPMENT Including documentation Matching tool cabinet with accessories included External reference: Showroom

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. Hjdpfx Aev Nzpgohvjfd From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 5.5 kW Hfjdpfeb A Nf Rsx Ahvod -Speed: 1400 rpm -Intake volume: 160 m³/h -Weight: 240 kg

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Hfsdpfow Tbr Hex Ahvod Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: used, Year of construction: 1976, turning diameter over bed 0300 mm turning diameter over slide rest 180 mm turning length 750 mm turning speed range 44 - 1300 U/min spindle bore 41,0 mm quill stroke 105 mm morse taper 3 MK bed width 245 mm total power requirement 2,2 kW weight of the machine ca. 1250 t dimensions of the machine ca. 2000 x 1200 x 1500 m We supply the machine with a 3 jaw chuck, a 4 jaw chuck, a face plate, a collet Hfsdpoxu Nrcjfx Ahved chuck with collets, a quick tool changer with holders and change gears for threat cutting.

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Hfodpoymk E Ajfx Ahvjd Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 55,000 km, Year of construction: 2019, 2-axle truck, 16 t GVW, fitted with a 3-way tipper body measuring 4.60x2.50 m, payload 6700 kg, Bonfiglioli Series 15000 crane with 4 hydraulic extensions, 4 outriggers, radio remote control, manual gearbox, rear air suspension, wheelbase 3900 mm, Euro 6 compliant. Note: The vehicle description is for guidance only and may contain errors or inaccuracies. Please contact us to verify the exact vehicle data. Hfedpfsyq R Ufex Ahvsd

Condition: new, Year of construction: 2026, saw blade diameter: 460 mm, cutting height (max.): 160 mm, cutting range round steel at 90°: 160 mm, saw blade speed: 120 rpm, cutting range square steel at 90°: 110 mm, cutting diameter: 160 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 120 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Saw Machine – CHK-160 Circular saw machines are industrial cutting solutions designed for the high-precision and mass cutting of pipes, profiles, and solid metal materials. They are widely used in serial production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Saw Machines deliver high production efficiency thanks to their robust mechanical structure and advanced automation system. Cutting parameters can be easily set via the PLC-controlled automation and touchscreen operator panel, enabling high-precision and serial cutting operations. The ductile cast iron machine body, powerful transmission system, and servo feeding technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular cutting technology • Servo drive feeding system • PLC-controlled automation system • High cutting precision and stability • Robust machine construction for industrial usage Application Areas • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supply industry Standard Features • Precision cutting and smooth surface finish • Special transmission design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo drive feeding system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter measuring system • Chip cleaning brush driven by hydromotor • Air pressure control system • User-friendly PLC control unit • Torque control system prolonging blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-160 Cutting Capacity (Round): Ø40 – 160 mm Cutting Capacity (Square): Max 110 × 110 mm Cutting Capacity (Rectangle): Max 140 × 120 mm Main Motor Power: 15 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Blade Size: Ø460 × 2.25 × 2.7 mm Blade Speed Range: 30 – 120 rpm Hodpfx Aheyq N Nzjvjfd Single Feed Length: 720 mm Bundle Material Feed Length: 3000 mm Trim Length: 60 – 70 mm Machine Weight: 4600 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,610 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 360 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load center: 600 Mast type: None Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 24V Hfodpjwgr S Sjfx Ahved Battery Ah: 150Ah Battery year: 2020 Description: Factory-refurbished used device from Toyota incl. new inspection and new approval according to FEM (formerly UVV). Load protection grid, impulse control, CE certificate,

Condition: used, spindle diameter 160 mm x-travel 10500 mm y-travel 4000 mm spindle taper ISO 50 z-travel 950 mm turning speeds 3,15-1000 U/min transmission ratio 4 spindle power 58 kW Support sleeve 340x400 mm w-travel 900 mm Hedpfxoyqvzwo Ahvefd Feed x 0,12-9600 mm/U Feed y/z/w 0,1-5600 mm/U Plate area 39,5 m² Plate 5400x3500 mm Plate 5900x3500 mm T-slot - distance 365 mm T-slots 35/75 mm Thickness of the plate 360 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 1600 mm y-travel 700 mm z-travel 850 mm control Heidenhain TNC 407 Hfjdpfx Aeyqtrajhvod taper ISO 50 Table dimensions 1950 x 650 mm spindle speeds 80 - 3000 U7min voltage 400 V total power requirement 23 kW Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1981, faceplate diameter 1600 mm swing diameter 2100 mm turning height 1700 mm Control R & D type MTC 4 turning speeds 280 U/min workpiece weight 20000 kg Tool changer 14 Pos. Hfedpfx Ahjyqr Srjvod weight of the machine ca. 2800 t dimensions of the machine ca. 3,7x3,75x5,1 m Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m NIPPON GEROTOR TYPE IS- 160-2PC-2AM0-MI-17 + NACHI SL-G01-C5-G0R-C1-S320B Hfsdpfxsymgb Tj Ahvjd WET TYPE MFG. NO. 000

Condition: used, power capacity / kW volt / V ampere / A Make: Baumüller Type: GNA 160 LV Power: 32kW Rotation max: 3375 rpm incl. fan Hsdsymf Npepfx Ahvjfd ODF 71-2 Power: 0.45kW Maximum rotation: 3600 rpm Weight: 315kg

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0,8L from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm Hfedpslxqk Hofx Ahvsd - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 160° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup Hfsdpfx Ahjuayatevod

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Hfjdpjx Edmpjfx Ahvjd Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: used, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 37 W, X-AXIS TRAVEL: 16,000 MM Z-AXIS TRAVEL: 1,500 MM Y-AXIS TRAVEL: 3,500 MM SPINDLE MOTOR POWER: 37 KG SPINDLE NOSE CONNECTION: ISO 50 SPINDLE SPEED: 4,000 RPM HEIDENHAIN iTNC 430 CNC 80-POT TOOL CHANGER 2.5° X 2.5° AUTOMATIC HEAD INTERNAL AND EXTERNAL COOLANT HEXAGON WORKPIECE PROBE 2000 X 2000 MM ROTARY-TRANSLATING TABLE, 15 TON LOAD CAPACITY, 1500 MM V-AXIS STROKE OPERATOR CABIN WITH OPERATOR Hedpfx Aox A Ulwshvjfd FIXED PLATES CHIP CONVEYOR

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Hfjdpfoh Dp R Eex Ahvjd Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale Hsdpjglvwgofx Ahvsfd With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. Hfsdpfx Ahjwccnpevsd The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Further information available upon request.

Condition: used, Year of construction: 1989, Erfurt press with 160-ton capacity, currently disconnected and drained, ready for transport. Hodpfx Ahjxyp Axjvjfd