Used Cylindrical Grinding Machine for sale (91,895)

Condition: ready for operation (used), Centre height: 175mm, centre width: 1000mm, max. external grinding diameter: 350mm, max. grinding length: 1000mm, max. workpiece weight: 130kg, grinding wheel dimensions X/Y/Z: 400mm/80mm/127mm. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1700mm, weight: approx. 3300kg, operating hours: approx. 21315h. An on-site inspection is possible. Fgodpew Dfhbjfx Afish

Condition: used, Year of construction: 1999, grinding diameter 120 mm centre height 100 mm Stirnschleifeinrichtung Kein Typenschild auffindb Fgsdpfsw Sybdox Afieh

Year of construction: 1997, condition: ready for operation (used), Main Drive Number of axis 4 Additional Equipment Belt filter system This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding device with a tiltable B-axis and a C-axis for out-of-round grinding, complemented by a belt filter system. Consider the opportunity to buy this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for more information. Fsdpow Spr Eefx Afisgh Application Types Grinding

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2205, grinding wheel diameter: 350 mm, grinding wheel width: 5 mm, mount diameter: 75 mm, Power Supply: 400 V / 50 Hz Power Rating: 70 kVA Fusing: 3 x 125 A Conductor Cross-Section: 5 x 25 mm² Cu Workpiece Diameter: ⌀ 5 – ⌀ 50 mm Workpiece Length: 50 – 300 mm Manual loading and unloading External fully automatic loading device Workpiece headstock fixed on grinding table Workpiece Spindle Unit: Dimensions: ⌀ 135 x 400 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: With HF motor Special Mount: Junker standard flange ⌀ 75 mm Max. Speed: 6000 rpm Tailstock: Longitudinal Adjustment: Manual Rotating Center: Junker standard flange ⌀ 48 mm (⌀ 75 mm) Grinding Table: Feed: Z-axis Grinding Spindle Headstock: Infeed: X-axis Horizontal Swivel: B-axis HF Grinding Spindle Units I, II, III: Dimensions: ⌀ 165 x 350 mm Flange: ⌀ 190 mm Standard Flange: ⌀ 127 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: 8 kW Balancing: Electronic Max. Speed: 8800 rpm Fgsdewfg Rgepfx Afieh Grinding Wheels I, II, III: Type: Borazon (CBN), ceramic bond Diameter: ⌀ 350 mm Bore: ⌀ 127 mm Coating Width: Max. 5 mm (standard) Peripheral Speed: Max. 140 m/s

Condition: excellent (used), Year of construction: 1983, Model: Fortuna F23 S1000 ASW 45 Manufacturer: Fortuna-Werke Maschinenfabrik GmbH Origin: Stuttgart-Bad Cannstatt, Germany Year of Manufacture: 1983 Machine Type: Universal external cylindrical grinding machine Control Type: Not CNC – semi-automatic with digital position indicators Workholding: Grinding between centers with headstock and tailstock Max. Grinding Length: 1000 mm Main Motor Power: 26 kW Voltage: 380 V Frequency: 50 Hz Connected Load: 50 A Machine Weight: Approx. 4900 kg Grinding Wheel & Spindle: Wheel Diameter Options: 400 mm, 450 mm, 500 mm, 600 mm, 750 mm, 900 mm Wheel Bore Diameter: 127 mm / 203 mm / 305 mm Spindle Speeds (depending on wheel size): From 930 rpm to 1870 rpm Surface Speed Compatibility: 35 m/s and 45 m/s Spindle Design: Combined axial-radial bearing system for high rigidity Oscillating Grinding Support: Yes – for improved surface finish and cooling Grinding Functions: External cylindrical grinding only (not centerless) Longitudinal feed (table movement) Plunge feed (cross movement) Oscillation grinding (with adjustable stroke) Digital input system (non-CNC but programmable logic based) Manual fine adjustment via micrometer and scale plate Notes: Machine is designed for roughing and finishing of steel, cast iron, and aluminum Built-in charts and formulas provided in the manual for infeed rates, stock removal, overspark passes, and optimal feed per material Extremely rigid German construction, ideal for toolrooms or production environments seeking repeatable precision without CNC control Equipped with electronic displays and control panel (not G-code programmable) Fgedpfx Afow Avhpeish Power panel and internal logic controlled through Fortuna's relay/PLC interface

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: TTS-10371, grinding wheel diameter: 200 mm, rotational speed (max.): 5,000 rpm, TECHNICAL DETAILS Application area: Pre-grinding tasks such as for step drills, narrowings, relief grinding, chamfering, etc. Spindle speed range: 1,000 – 6,000 rpm Maximum grinding wheel dimensions: 300 mm Voltage: 380–420 V, 50 Hz Full load: 15 A Phases: 3 MACHINE DETAILS Fsdpfxsxam Tbs Afisgh Weight: 1,700 kg EQUIPMENT - EPSON manipulator

Condition: excellent (used), Churchill Model D Cylindrical Grinder Fedpsw U Undsfx Afisgh 25″ / 635mm Swing Over Bed, 118” / 3000mm Between Centres, 26″ / 660mm Dia Wheel, Swivel Table Coolant Tank & Pump, 4 off Steadies,

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm Fgjdpfjw Sya Tex Afijh serial number 12013

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Fgodpfjtximvex Afioh Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: ready for operation (used), Year of construction: 1987, Swing diameter: 280 mm Distance between centers: 630 mm Max. workpiece weight: 60 kg Total machine power consumption: 10 kVA Total machine weight: 3000 kg Fgsdpfx Afow Uk Dhoish The machine is fully functional and comes with a very comprehensive set of accessories.

Condition: used, Year of construction: 2009, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm Fedpfx Afsw Rf Tvsijgh External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Make Karstens Technical data: Center width: 1100 mm center height: 180 mm / (250 mm = option) workpiece weight: 100 kg flying, 300 kg between centers grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) workpiece spindle: MK 4, speed infinitely variable 30-450 rpm, swivel range 0 - 90 ° tailstock: MK4, quill stroke 45 mm quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) table inclination: 10 degrees feed spindle adjustment travel: 80 mm rapid traverse path: 50 mm Coarse adjustment air cushion: 280 mm Grinding spindle motor outside: 4 KW / (5,5 KW = option) Infinitely variable speed adjustment of the grinding wheel with potentiometer grinding spindle motor inside: 2,2 KW Workpiece spindle motor: 1,1 KW Hydraulic motor 1,5 KW Lubrication motor 0,1 KW Hydraulic tank 80 liters Machine weight: Net 3800 Kg Infeed drive by DC motor Air cushion-supported quick adjustment of the grinding headstock for fast and safe approach of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Fedpfxjh Rimms Afisgh Fast forward, fast reverse, grinding mode, infeed stop, mym infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Work headstock with infinitely variable drive with travelling and lockable spindle. New infeed control digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for return, infeed amounts, feeds, burnout times, empty strokes, compatible to the old Karstens infeed control, with colored Siemens touch panel similar to Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: good (used), Max. diameter: 560mm Working length: 3550mm Fedpev Dvzysfx Afijgh Max. workpiece length: 4000mm

Condition: like new (used), Year of construction: 2019, absolutely as good as new condition, Fgjdpfx Afovt R Awsijh 2 external wheels, 1 internal grinding spindle Siemens control controlled B-axis suitable for Capto grinding (out of round) center width 1000 mm center height 200 mm

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Price on request Used universal grinding machine Brand WMW Type SU 315 x 1000 mm With internal grinding attachment Max. workpiece diameter 315 mm Max. machining length 1000 mm Grinding spindle speed 1340 rpm Workpiece speed 22-500 rpm Table travel for longitudinal grinding 5-1680 mm Table speed 0.05-5 m/min Workpiece mass max. 300 k Connection value 12.5 kW Fgedpfx Afjwl A H Deijh Machine weight approx. 5.8 t Use Cylindrical universal grinding machine Manufacturer WMW Model SU 315 x 1000 mm With internal grinding spindle max. working diameter 315 mm max. working length 1000 mm speed of grinding spindle 1340 rpm Table feed travel 5-1680 mm Table feed 0.05-5 m/min. Workpiece weight max. 300 kg Machine weight approx. 5 t

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Fjdpfx Afju Rdm Ujiogh Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: used, Year of construction: 2000, centre distance 1000 mm Fgodpfxjvy Im Hs Afieh grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Distance between centers: 2000 mm Maximum grinding diameter: 360 mm Height at center: 180 mm Wheel diameter: 500 mm Wheel width: 80 mm Restear rest: Yes Internal grinding: Yes Fgjdev R Ufdopfx Afioh

Condition: good (used), Center height: 175mm Max. workpiece diameter: 350mm Fgsdow Tyr Sepfx Afish Max. grinding length: 1000mm YOM: 1993

Condition: refurbished (used), Year of construction: 2015, Retrofit 2015 Fgodpfx Afsuc Uttoijh Karstens K 52 cylindrical grinding machine, CNC control Eckelmann ENC 66, Workpiece length 650 mm, Weiss Schleiftechnik retrofit 2015, Expansion through automation 2023, Spindle power 7.5 KW, Center height 180 mm, Ø grinding wheel 500 mm, straight / angular grooving, filter system, Auto. Loading between the centers, Prismatic belt blank / finished part

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 020.0686.90.084, Price on request Used CNC cylindrical grinding machine Manufacturer: STUDER Model: S 36 CNC Year of manufacture: 1999 With FANUC 16 G CNC control Used Cylindrical Grinding machine Manufacturer: STUDER Model: S 36 CNC Fsdpfx Afswl Axtsiegh Year of manufacture: 1999 With FANUC 16 G CNC control

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5041, Please let us know your asking price. Fgsdpfsu Izvhsx Afijh Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: used, Year of construction: 1979, centre height 125 mm centre distance 1.025 mm max. travel of plain turning slide 1.020 mm table speed -stepless- 0,05-5,5 m/min Cylindrical Grinding Machine - Universal | STUDER - RHU 1000 / 125 equipped with a grinding wheel on the right side for external and longitudinal grinding, as well as straight and angular plunge grinding. The machine is in excellent, well-maintained condition. For further technical details, please refer to our offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RHU1000/125 | RHU1000 / 125 | RHU 1000 - 125 | RHU1000 125 Fgsdpow Nbl Esfx Afish

Year of construction: 2007, condition: ready for operation (used), This OKAMOTO OGM 250UDX GRIND-X cylindrical grinding machine was manufactured in 2007. It features a maximum workpiece diameter of 220 mm and a distance between centers of 500 mm. The grinding wheel measures 305 mm in diameter. With a robust design, it weighs approximately 1900 kg. Consider the opportunity to buy this OKAMOTO OGM 250UDX GRIND-X cylindrical grinding machine. Contact us for more information. Fjdpsw I H Ayofx Afisgh Application Types Grinding

Condition: used, Rondslijper centre height 125 mm centre width 650 mm grinding diameter 250 mm grinding wheel diameter 400 mm total power requirement 8 kw weight approx. 2500 kg Dit is een machine van Machines4you Fgjdpfx Ajgfqn Nefish