Used Cvt Transmission for sale (10,731)

Condition: used, Part suitable for: trucks Price: On request Bedpfoyrd Rvex Adrjdd VAT/differential taxation: VAT deductible Type number: ACHL 195

Condition: used, Part suitable for: trucks VAT/margin scheme: VAT deductible Type number: 2616790 Bdsdpoyrd Rpofx Adrod

Condition: used, Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Bedoyrd Dvopfx Adrsdd Type number: ACHL 193

Condition: used, Gear, bevel gear -Gearbox No.: 1511747 -Shaft: Ø 22 mm -Hollow shaft on the coupling side: Ø 19 mm Bdjdpfodnn H Iox Adred -Translation: i 30,000 -Torque: (80 Nm) -Number: 2x available -Price: per piece -Dimensions: 215/100/H125 mm -Weight: 7 kg

Condition: good (used), Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm Bsdpfx Aeikbq Todrsdd -Weight: 1.4 kg

Condition: good (used), Gears, spur gears, bevel gears, worm gears -Manufacturer: Himmel, gearbox type DF41 - KQ60 - (Q60) -Translation: i 18.93 -Drive shaft: Ø 30 x 60 mm -Hollow shaft: see photos -Ma: 330 Nm -Dimensions: 375/200/H225 mm -Weight: 27.3 kg Bdsdpfxshu Hwue Adred

Condition: good (used), PTO gearbox, hydraulic pump gearbox, gearbox, spur gear, transmission gearbox -PTO gearbox: hydraulic pump gearbox with incoming profile shaft -PTO input: 1-3/8" 6 teeth -Splined shaft output: 35x31 Z-18 -Shaft spacing: 204 mm -Bolt circle: Ø 155 mm / M12 -Dimensions: 350/205/H220 mm -Weight: 13.2 kg Bsdpfxsvum Sdj Adrodd

Condition: used, Gearboxes, stin gearboxes, angular gearboxes, transmission gearboxes, crane gearboxes -Ratio: 16.29: 1 -Hollow shaft: Ø 80 x 310 mm -Hole circle: Ø 300/ M16 -Price: per piece -Number: 2 pieces Bdsdpeffm Ecofx Adrjd -Dimensions: 700/540/H405 mm -Weight: 282 kg/piece

Condition: good (used), Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm Bdjdscnl Snjpfx Adrsd -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

Condition: used, Gears, spur gears, bevel gears, worm gears -Manufacturer: Stöber, gearbox type K813AG0420SD132S4 -Translation: i = 42.495 -Hollow shaft: Ø 70 x 260 mm -Drive wheel: helical -Bolt circle: Ø 215 mm M12 -M2 perm: 1482 Nm / n1= 1440 rpm n2= 33.9 rpm Bedpfxjlb Iwqs Adredd -Dimensions: 420/290/H410 mm -Weight: 125 kg

Condition: used, functionality: unexamined, Ferwood code: RU0002879 - Manufacturer code: 2-083-01-5081 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, please contact us. Bodpfowtf Iyox Adrodd

Condition: used, functionality: unexamined, Ferwood Code: RU0009311 - Manufacturer Code: CACR-SR30BE12G-E - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bodjv Hrilspfx Adrsdd

Condition: new, heavy stock,2 12mm,XXL gripper,three-way transmission,not thread cutting Bdsdpoq Nl Nlofx Adrod

Condition: new, machine/vehicle number: 944460433, Reconditioned torque converter for Caterpillar D11 N R with prefix 74Z More information Bjdpfx Adjmwit Esrodd Type: transmission, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Part suitable for: DAF Technical condition: very good Visual condition: very good Price: on request Bodpfx Adsx Nmzasrodd VAT/Margin scheme: VAT deductible Type number: 2238877/8520245448

Condition: used, Part suitable for: trucks Price: On request Bsdsyanr Hopfx Adrjdd VAT/margin scheme: VAT deductible Type number: 00586247

Condition: excellent (used), Extremely rare machine, possibly the only one for sale in the world today. Gas flush whole bins or dolavs of product. The CV-Tek® CVP Systems A-200 Overhead model line brings the advantages of Modified Atmosphere Packaging to large and bulk items. Full pallets and dolav bins can now be processed efficiently. Being suspended from either the ceiling or wall allows excellent logistics for moving bins and pallets during processing. Bedpfx Aoi E Tt Hsdrodd Wrinkle free seals are achieved with seal bars of 100 inches (2540mm) and automatic bag stretchers. Floating head prevents bag pullout.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW, Rated current: 21 A Sound pressure level at 1m distance (free-field measurement): < 69 dB (A) Side feed-through: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Bdjdpfxezg Tyzj Adred Weight: approx. 570 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Bedpoh Tnaqefx Adrsdd Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,400 kg, lifting height: 8,800 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 9,530 kg, total length: 5,570 mm, drive type: Diesel, construction width: 2,400 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Bdjdpfozhyprox Adrod Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Bdsdpfxsxufype Adrsd Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Bdedpfx Adszdtdhersd Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants that comply with legal regulations 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, operating hours: 900 h, * HAMM HD10 C VT combi roller * NEW MODEL Bedpfjyq A D Sjx Adrodd * Year of manufacture: 2021 * 900 h * 16.1 kW Kubota D1105 engine * 1500 - 1740 kg * Edge cutting wheel

Condition: new, Year of construction: 2025, This handling device is suitable for safely and stably handling large-area materials with just one operator. The device can be provided as an independent unit to any machine. The price-performance ratio is impressive, as the payback period is less than one year. Comprises the following main components (also available individually): • Column stand • Pivot arm • Lifting traverse with controls Technical data VT 1000: Lifting capacity: 1000 kg Max. lifting height: 1295 mm Lifting speed: 4 and 8 m/min Max. rotation radius: 3900 mm Power supply: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight dependent) Bjdpew Nh Dzefx Adredd Overall height: 2990 mm Total weight: 1350 kg Alternatively, we also offer this handling device with a lifting capacity of 500 kg.

Condition: new, Year of construction: 2025, This handling device is designed for the safe and stable handling of large-area materials with just one operator. The device can be positioned next to any machine as an independent unit. The price-performance ratio is compelling, as the payback period is less than one year. Consisting of the following main components: (also available individually) • Column stand • Swivel arm • Lifting crossbeam with controls Technical data VT 500: Lifting capacity: 500 kg Max. lifting height: 1750 mm Lifting speed: 4 and 8 m/min Max. turning radius: 3900 mm Power connection: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight-dependent) Overall height: 3580 mm Overall weight: 850 kg Bdodpfx Asfi Trbjdred Alternatively, we also offer this handling device with a lifting capacity of 1000 kg.