Used Cutters Mk 2 for sale (43,890)

Condition: used, Year of construction: 2011, Weights Empty weight: 3.770 kg Functional Mast: articulated arm Lifting capacity: 215 kg Working height: 1.350 cm Identification Serial number: A38E-01-004598 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Ibedpfxsxlx N Se Afiec Tyre brand: - Max. horizontal reach: 610 m Transport dimensions (LxWxH): 4.1x1.5x2 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Code: 0026 Iodpfxovw Uf Do Afijbc Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), axle configuration: > 3 axles, loading space length: 27,060 mm, loading space width: 2,530 mm, first registration: 04/2006, suspension: hydraulics, tire size: 245/70-R17.5, Year of construction: 2006, Equipment: ABS, = Additional options and equipment = - EBS - Lift axle - Air suspension - Drum brakes = Notes = 2006 BROSHUIS 5ABSD-68/2 5-axle low loader with ABS/EBS, double extendable (6.70m + 6.50m), extendable up to 27m, 1st axle is a lift axle, 5x hydraulically suspended axles, of which 4x are hydraulically steered (with remote control), hydraulic gooseneck, stake pockets, lashing rings, twistlocks, extensions, unladen weight: 17,000kg, max. total weight: 97,000kg, GIGANT axles with drum brakes, twin tires with 245/70-R17.5 (L: 8/8, 7/8, 7/7, 6/8, 6/4mm; R: 10/11, 7/7, 5/6, 8/6, 6/5mm) = Additional information = Axle configuration Tyre size: 245/70-R17.5 Axle brand: GIGANT DRUM Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Tread depth left inside: 50%; left outside: 50%; right inside: 70%; right outside: 60% Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 50%; left outside: 45%; right inside: 45%; right outside: 45% Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 45%; left outside: 45%; right inside: 40%; right outside: 30% Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 50%; left outside: 40%; right inside: 40%; right outside: 50% Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 25%; left outside: 40%; right inside: 30%; right outside: 40% Ibjdoxni Dlepfx Afisc Dimensions Dimensions (L x W): 2,706 x 253 cm Weights Unladen weight: 17,000 kg Payload: 80,500 kg Gross vehicle weight: 97,500 kg Functional Body make: Broshuis 5ABSD-68/2 Loading height: 100 cm Extendable body: Yes Condition Technical condition: Good Visual condition: Good Further information Please contact Arne Honingh for further details.

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V Ibedpfxswu Dbbe Afiec kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Iedpoxlggrsfx Afiobc

Condition: good (used), Swing over bed 425 mm Distance between centers 1500 mm Spindle speeds 36-2240 rpm Ibedpfx Afohz D Eueijc Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: Ibsdpfx Ajfpa Ihjfiec • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Code: 0419 Isdpfxju A S Hao Afisbc Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: used, axle configuration: 3 axles, wheelbase: 6,390 mm, loading space length: 9,430 mm, loading space width: 2,440 mm, first registration: 06/1994, suspension: air, tire size: 385/65 R22.5, Year of construction: 1994, Equipment: ABS, = Further Options and Equipment = - ADR - BPW axles - Lift axle - Air suspension - Drum brakes = Notes = 1994 DESOT 20FT/30FT ADR chassis with 5 twistlock arms (20FT center/rear, 30FT), ABS, BPW Eco axles with drum brakes, ADR (FL, AT), 1st axle = lift axle, 385/65-R22.5 tires (L: 10/8/8 mm; R: 13/8/9 mm), unladen weight 3,800 kg, max. gross weight 38,000 kg, Belgian registration = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Left tyre tread: 65%; Right tyre tread: 80%; Brakes: Disc brakes Rear axle 2: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50%; Brakes: Disc brakes Rear axle 3: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 55%; Brakes: Drum brakes Ibodpfjxbhc Hjx Afiec Measurements: Dimensions (L x W): 9,300 x 255 cm Weights Unladen weight: 4,800 kg Payload: 33,200 kg Gross vehicle weight: 38,000 kg Condition General condition: average Technical condition: moderate Visual condition: average Additional Information Please contact Arne Honingh for further details.

Condition: used, Year of construction: 2011, Weights Empty weight: 3.770 kg Functional Mast: articulated arm Lifting capacity: 215 kg Working height: 1.350 cm Ibedpjxivwhofx Afioc Identification Serial number: A38E-01-004590 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 610 m Transport dimensions (LxWxH): 4.1x1.5x2 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 614,338 km, first registration: 11/2016, fuel type: diesel, EQUIPPED WITH PTO PREPARATION Iodpsxmlihjfx Afiebc For information

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Iedpfx Ajuzlh Isfisbc

Condition: used, Year of construction: 1979, functionality: fully functional, feed length X-axis: 850 mm, feed length Y-axis: 280 mm, feed length Z-axis: 355 mm, overall weight: 6,100 kg, For sale is a Fritz Heckert FW 315 X1/2 milling machine from 1979. The machine is fully operational and is being sold based on offers. Please submit your serious offer. Scrap prices or offers only slightly above scrap value will not be considered. Technical specifications: Year of manufacture: 1979 Rated voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connected load: 8 kW Machine rated current: 19 A Incoming line fuse: 50 A X travel: 850 mm Y travel: 280 mm Z travel: 355 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Speed range: 28 - 1400 rpm Table clamping surface: 1070 x 270 mm Total weight: approx. 6.1 t (tons) Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are exclusive of VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Ibodewv T I Tspfx Afioc Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Code: 0030 Brand: MARZANI Model: RE/2 Automatic slot-cutting machine for window shutters Ibjdjvyy Uiepfx Afisc Technical data Spindle coupling mm 10 Bit rotation 10000 rpm Two uprights can be processed simultaneously Several cutting intervals executable Main motor Hp 2 Working unit inclination Bits lowering adjustment Feed adjustment Slot skipping Compressed air 6-7 bar Overall dimensions mm 1450 x 950 x 1400 h Weight kg 440

Condition: excellent (used), Year of construction: 2009, operating hours: 150 h, functionality: fully functional, power: 30 kW (40.79 HP), Chipper Shredder Teknamotor SKORPION 280EB/2 - manufactured in Poland - year of production 2009 TECHNICAL PARAMETERS: Material diameter 140 mm main motor 30 kW number of knives 2 pcs. length of knife 270 mm length of infeed transp. 2500 mm belt width 280 mm transport dimensions (length / width / height) 4100 / 1000 / 1550 mm weight about 1000 kg Ibjdpexmif Hofx Afiec

Condition: used, Year of construction: 2011, Weights Empty weight: 3.770 kg Functional Mast: articulated arm Lifting capacity: 215 kg Isdpfx Afsxivvweiebc Working height: 1.350 cm Identification Serial number: A38E-01-004549 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 610 m Transport dimensions (LxWxH): 4.1x1.5x2 Additional information Please contact PFEIFER GROUP for more information

Condition: used,

Condition: new, The SB E 2060/2 is a robust Manual Folding Machine from KNUTH, designed to meet the demands of the Folding Machines category in the Manual Folding Machines group. With its sturdy cast-iron construction, this machine efficiently handles bending operations for large plates up to 2000 mm in length and a maximum plate thickness of 2 mm. Featuring a long male die stroke and a one-piece male die, the SB E 2060/2 ensures precision and durability in every application. The high counterweight facilitates easy bending, making it versatile for various tasks. Additionally, it comes with an operator manual to assist users in setup and safety. For those interested in reliable and powerful performance in sheet metal processing, this machine stands out. Ready to enhance your productivity? Request a quote today for the SB E 2060/2 and experience the benefits of a robust Folding Machine. Iboden Tlg Iopfx Afisc

Condition: used, mileage: 752,350 km, emission class: euro6, Year of construction: 2016, Year of manufacture: 2016 Price: On request Iodpoxl Ui Usfx Afiobc

Condition: good (used), Code: 0218 Brand: ORMAMACCHINE Model: P25/2 Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Platen dimensions mm 2500 x 1200 Aluminum-coated platens Opening mm 500 N° 2 hydraulic pistons Ø 40 Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800 Isdpfxoxlt Uve Afijbc

Condition: used, max. temperature 1150 Grad voltage 380 Volt total power requirement 5.0 kW Dimensions - Inside - B x H x T 220 x 220 x 350 mm weight 50.0 kg from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: Iodpfxjxg R Ivj Afijbc - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

Condition: used, Double-shaft shredder Drive 37.50 KW Ibodexgtcvspfx Afiec

Condition: used, Calibrating machine brand Sandingmaster model CSB/2/900, roller + pad, with 900 belt, roller motor of approximately 11 Kw, pad motor of approximately 7.5 Kw. Used. Ibedpfx Asiv Daujfioc Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 carpet, roller motor of about 11 Kw buffer motor about 7.5 Kw. Used.

Condition: good (used), Code: 0610 Brand: LEISER Model: 120/2 Rebating cutter With 2 knives Diameter mm 120 Height mm 70 Hole mm 40 Ibodpfsd I H Rfex Afijc

Condition: used, Comec FR/2 Programmable automatic milling machine for cot legs or similar items, overhauled Ibsdpfjr R H D Hjx Afioc