Used Cut To The Length Line for sale (50,902)

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Fsdov Hm A Tepfx Ab Tsgk - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm Fgjdpfx Ajhzbipsb Tek - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Fgedpfx Abewk Iphj Tsk Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Fgedpfx Asvrvcajb Tjk Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: new, Year of construction: 2025, Shears for transversal cutting of sheet metal to length: Fgedpfx Absfvqfxe Tok - roller shears - holder for sheet metal - max. input width 1.250 mm

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Fedpfowk Himex Ab Togk Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. Fgodswk E Uuspfx Ab Tjk TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Fgjdpfxod I D R Ts Ab Tsk Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Fgjdpfxsxxldco Ab Tek Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: excellent (used), Year of construction: 2021, PROLINE 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: Fgedpogb Rkljfx Ab Tjk - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 700 h, CMS Tecnocut Easyline like new Fgedpetq Eh Dsfx Ab Tok Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Fsdpfx Aew Dpzrsb Tsgk Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump

Condition: good (used), Year of construction: 2018, operating hours: 1,900 h, CMS Tecnocut Easyline Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 2.000 mm Z-Axis: 220 mm Options: - Sanddoser - Dredge for abrasive - Antikollisionsfeeler Fgsdpfxeun Rm Ij Ab Tok - CAD/CAM IGEMS

Condition: like new (used), We sell an automatic machine to cut vaseline for embroidery. Ideal for high volumes shops using, ZSK, Tajima, Barudan, Brother, Happy machines. High end and easy to operate, huge savings on labor/material Fgsdpfjxz S Tvex Ab Tsk Completely programmable Rare

Condition: like new (used), Device for cleaning die-cut sheets Fodpowyxi Rofx Ab Tegk German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device.

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Fgodpstqmwgofx Ab Tek Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2024112326, CUT-CREASE-FOLD Max cut size - 600*900mm Operating mode - Vacuum absorption Cutting accuracy - 0.01mm Head - 2 blade heads Fedpfjx Ezk Iox Ab Togk Repeat Accuracy - 0.05mm Maximum uncut running speed - 800mm/s Max cutting speed - 700mm/s Force - 2000g Output modes - U disk/WiFi/USB Power

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: no 1, total height: 2,000 mm, total width: 100 mm, total length: 8,000 mm, overall weight: 1,500 kg, year of last overhaul: 2022, high capacity, packing possible from both sides. 20 rolles of plastic will follow this machine Fsdpfx Asx Dtgpob Togk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Fgjdpfxow Uppps Ab Tok Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: excellent (used), Hydraulic Guillotine Shear (used) Manufacturer: VOLZ Euro-Cut Model: 6.5 x 3050 Year of manufacture: 2002 Max. cutting length: 3050 mm Max. plate thickness (ST 45): 6.5 mm Distance between side frames: 3050 mm Motorized back gauge adjustment: 20 – 1000 mm Cutting angle adjustment: hydraulic Hold-down clamps: 18 pieces Motor power: 11 kW Machine weight: approx. 5100 kg Required space: Width 3830 mm, Depth 2865 mm, Height 1700 mm Foot switch Angle stop Front support arms Motorized back gauge adjustment Fedpfsx Ag Scox Ab Togk Cutting edge illumination The machine is in very well-maintained condition and is immediately ready for operation. Forklift available, free loading onto truck Low-cost shipping available Machine location: 59510 Lippetal

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 Fgedpfx Aboxz Ayts Tek - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: like new (used), Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Fodpfsuyhdvex Ab Tegk Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Variojet Rinser Filling machine Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Fjdjv Ay Uujpfx Ab Tsgk Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters

Condition: used, Year of construction: 2010, Bottling Line: Krones CSD Line Year of Manufacture: 2010 Suitable for: Carbonated Soft Drinks Currently Running: Apple Juice with Water and CO2 Container Sizes: PET 0.5 L – PET 1.0 L – PET 1.5 L Neck Formats: PCO 1810 – 28 mm / PSO 28 mm – 1810 – 1881 (Short Neck) Fedpfx Asxfg Ebsb Tegk Capacity: • 24,000 bottles/hour (0.5 L) • 18,000 bottles/hour (1.5 L) Control System: Siemens Simatic S7-series PLC Operating Hours: approx. 40,000 Krones VarioClean F AUT: Fully automatic CIP system, 4 x 5,000 L, 30 m³/h GEA TDS Processing Plant: Includes flash pasteurizer, mixer, carbonator, degasser, and tanks Preform Hopper and Feeder Conveyors: • Preform Feeding System: Krones Contifeed RS • Preform Cleaning Unit: Prejet Linear Cap Feeding System: Gassner, includes cap rinsing and sterilisation Blow Moulder: Krones Contiform S12M Ultra Clean Volumetric Filler: Krones 86-22 (Volumetric VODM-PET) with capper Filler Block Cleaning: Krones VarioDos ultra clean Date Coder: Domino DDC 3 (laser) Filling Level Inspection: Krones Checkmat Bottle Conveyors: Krones SYNCO S Bottle Leak Tester: Krones Flowliner Labelling Machine: Krones Contiroll OPP 720-15, double roll feed, hotmelt glue applicator Label Inspection: Krones Checkmat 731 EM Shrink Packer: Krones (Kettner) Variopac TFS 30 (2003) Package Conveyors: Krones Multico S Handle Applicator: Twin Pack Pack Coding: Leisinger Jet 3 (inkjet) Palletiser: Krones Robopox Modulpal (year 2016) Reference Code: NP 647

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Fgjdouhzlaopfx Ab Tsk Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator HEUFT bottle inspector X-ray for bottle bottom inspection Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml User manuals and wiring diagrams present