Used Cushions for sale (608)

Condition: refurbished (used), Year of construction: 2026, Karstens K11 650 The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been tested and is in very good condition. As specialists in Karstens cylindrical grinding machines, we can provide you with complete service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 650 mm Centre height: 180 mm Workpiece weight: 100 kg (between centers), 250 kg (supported) Grinding wheel diameter: 400 mm Workpiece spindle: Morse taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: MT4, quill stroke 45 mm, micrometer adjustment Quill force: 200–600 N, hydraulically operated via foot pedal Table swiveling: 10 degrees Feed spindle adjustment range: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,800 kg Pedsh Rixxspfx Ahvjgi Feed drive by DC motor Air-cushion-assisted rapid adjustment of the grinding spindle stock for fast and precise positioning of the grinding position. Separate drives for external and internal grinding spindles. Fully automatic operating sequence, feed movement controlled via cam switch: Rapid approach, rapid return, grinding mode, feed stop, micron feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with infinitely variable drive for live and locked spindle operation. Feed control for both plunge and traverse grinding, input for retraction, feed amount, feed rates, dwell times, and idle strokes Paper band filter system approx. 250 L Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Podpfx Aetqf Sqehvjgi Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Psdpfjiv Audjx Ahvsgi Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres, 300 kg with support Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed from 30-450 rpm, swivel range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N adjustable = optional) Table swivel: 10 degrees Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW = option) Infinitely variable speed adjustment of grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3800 kg Infeed drive via DC motor Air cushion-supported rapid adjustable grinding spindle stock for fast and safe positioning to grinding location. Separate drive for spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via rotary dial switch: Rapid approach, rapid return, grinding operation, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Pjdpfx Ahsh Rimmsvsgi Central coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle operation. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, inputs for retraction, infeed amounts, feed rates, spark-out times, dwell strokes; compatible with the old Karstens infeed control; with colour Siemens touch panel. Similar to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manually, (up to 2500 N adjustable, option) Pgjdsiv Au Eopfx Ahvji Table swivel: 10° Cross slide travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3,800 kg Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, infeed movements controlled via rotary selector switch: rapid advance, rapid return, grinding mode, infeed stop, micrometre infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for traverse and plunge grinding; input for retraction, infeed amounts, feed rates, spark-out times, idle strokes; compatible with the original Karstens infeed control; with coloured Siemens touchscreen; HEIDENHAIN scales in X and Z axes. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, Pgodpfxeyc Nubj Ahvji 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: used, Year of construction: 2001, Used machine Podpfxjwka S Us Ahvegi Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Podpfxoyw I Dre Ahvjgi Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: used, • Model – Genius 37 CT-S • Year of manufacture – 2007, serial number: 86592 Pgodpfx Ahewz U Hbevei • Max. glass size: 3300 x 2550 mm • Glass thickness: 3 – 19 mm • Can also cut shapes, offcut optimization, data input at the cutting table • With breaking bars and strong air cushions • Table can also tilt • Working height: 900 mm • Weight: 2600 kg

Condition: used, • Type – 490P/LFB/1Q+14 No. 2020/6450 • Semi-automatic for split strips • Cutting head can be automatically switched between longitudinal and cross-cutting • Digital display for longitudinal and cross-cutting • Cross-cutting drive: Automatic • Longitudinal cutting by pulling the cutting bridge over the cutting table • Complete table is pneumatically tiltable • Air cushions • Breaking bars • Working height approx. 900 mm • Table length – 3800 mm, width – 2500 mm • Width with cutting bridge 2800 mm • Year of manufacture approx. 2020 Pedpfx Aowcz Rijhvegi • Price upon request

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: GG6BCO-7816, total width: 3,660 mm, total length: 7,100 mm, overall weight: 3,300 kg, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, Bottero 100BLC jumbo table with belts and air cushion as loading and supporting table. Serial Number: GG6BCO-7816 Dimensions: L7100xW3660mm and approx. 3300Kg Podpfxjx A D Rvj Ahvsgi

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18/12, total length: 4,100 mm, total width: 1,850 mm, total height: 2,400 mm, overall weight: 800 kg, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), The SBM 1500 offers fully automatic blasting of glass between 3mm-40mm thickness, with up to twenty stored programmes for repetitive work, or fully creative manual blasting with an air-cushioned, counterbalanced gun. The unique design of the Bohle SBM 1500 means the rear wall and glass remain stationary, while the entire blast cabinet moves across the glass, which is held securely in place by a vacuum seal. This construction ensures that the sandblasted glass remains scratch-free, and with no infeed or outfeed, the machine is ideal for tight working areas, occupying a footprint of only 4m x 1.85m. Despite its compact dimensions, the open-topped design accommodates large sheets with ease, and by rotating, the 1.5m blast stroke can be doubled. The Bohle SBM 1500 is engineered for high throughput and minimal maintenance, offering approximately 10 square metres per hour coverage and featuring hard-wearing Boron Carbide nozzles for maximum service life. Podpoyntt Eefx Ahvjgi

Condition: good (used), Year of construction: 2012, operating hours: 750 h, functionality: fully functional, machine/vehicle number: GG5BTO-20295, total width: 3,510 mm, total length: 4,760 mm, overall weight: 1,900 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, Configured as follows: 352BCS-R EVO air cushion & tilting motion assembly Pgodsyg Etzopfx Ahvei Quick shut-off, edge barriers, On-board optimization. Regular breakout bars assembly Sandblast plastic cutting OPTWIN-CAD/M CE safety barriers 200 m/min - 2-19 mm - 1900 KG

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 551A 117, total width: 4,900 mm, total length: 6,100 mm, overall weight: 4,500 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 4,600 mm, BOTTERO LAMILINEA 551A - Year 1993 Max cutting length: 4600 mm Air cushion power: Minimum 200 mm water column Processable thickness range Monolithic: 3 - 10 mm Laminated: 3 + 0.38 + 3 (33-1) minimum, 8 + 4.56 + 8 (88-12) maximum Maximum carriage speed: 40 m/min - Max. cutting tolerance: +/- 0.5 mm Overall dimensions: 4900 x 6100 mm Weight: 4500 kg Working table height: Adjustable from 900 up to 940 mm Installed power: 18 KVA Compressed air max. consumption: 500 NL/min Pgsdpfjyntq Rex Ahvoi

Condition: used, mileage: 60 km, power: 125 kW (169.95 HP), first registration: 04/2023, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,059 mm, total height: 2,765 mm, loading space length: 4,073 mm, loading space width: 1,784 mm, loading space height: 2,025 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 62781---- Psdpfjyvc N Sjx Ahvegi Subject to errors and prior sale! SPECIAL EQUIPMENT * Airbag (passenger side) * Navigation system – dynamic as well as cloud-based navigation with traffic info, lane recommendation, and road map for Western Europe – includes automatic climate control – Ford audio system with 12" multifunction display and Ford SYNC4 – Bluetooth – hands-free system with voice control – music playback via voice control – integration of storage media (USB, MP3 player) – FordPass Connect including WLAN hotspot, control of selected functions via the FordPass app – emergency call assistant – Ford Power-Up – Android Auto, Apple CarPlay – touchscreen * Seat Package 15: Driver’s seat, 4-way adjustable – double passenger seat with storage compartment under individually folding seat cushions – height-adjustable headrests – integrated tray in the double passenger seat (foldable) – seat heating for driver and passenger – inner armrest for driver – lumbar support, manual (driver’s seat) – seat covers: fabric * Technology Package 13: Heated windscreen – rain sensor wipers – Park Pilot System front and rear, also with side sensors – active emergency braking assistant (radar-based) – lane keeping assistant with driver drowsiness alert and high beam assistant, also with lane keeping and lane change assistant – headlight assistant with day/night sensor – blind spot assistant – adaptive cruise control – reverse camera – LED downlight – fog lights – exterior mirrors, electrically adjustable, folding, and heated – automatic climate control – Ford audio system with 12" multifunction display and Ford SYNC4 ADDITIONAL EQUIPMENT * 1 battery * Driver's airbag * Anti-lock braking system with electronic brake force distribution incl. – ESP with traction control – hill start assist – crosswind assist – safety brake assist – rollover protection – emergency braking support incl. emergency brake light * Exterior mirrors, electrically adjustable and heated – with integrated turn signals * Battery: programmed operating time set to 10 min * On-board computer with consumption and mileage data * Rear double-wing door with 256° opening angle (without windows), no rear windscreen, with holding magnets * Front electric windows – with quickdown/-up for driver’s side * Ford Easy Fuel * High-performance alternator * Glove compartment with lockable lid * Interior lighting with delay function and front reading lights * Fuel tank 70 l * Cargo area lighting * Steering wheel: artificial leather * Steering column adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights * Emergency call assistant * Particle filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ – radio – DAB/DAB+ – MyFord Dock – FordPass Connect – speakers, antenna – audio remote control on steering wheel – Bluetooth interface – USB port – hands-free system * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 16 with 235/65 R 16 tires * Low-beam headlights: halogen headlights with daytime running lights * Sliding door entry light, automatic with door opening * Sliding door, right * Rear mud flaps * Side protective strips * Power steering * Seat belts – front seatbelt pretensioners and force limiters * Start-stop system * Rear bumper with integrated step * Partition (plastic) at B-pillar height * Recirculation switch

Condition: good (used), Year of construction: 2015, functionality: fully functional, total height: 9,000 mm, total width: 8,000 mm, total length: 8,000 mm, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Pedpfjyw Ah Eox Ahvjgi Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm dimensions (WxDxH) 1,9 x 1,3 x 2,7 m Pedsvuk Nmepfx Ahvogi permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Pgsdpfx Asx Twcvehvji

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, Pjdpoyu N Rgefx Ahvegi scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 90353865, Year of construction: 2009, operating hours: 4,385 h, load capacity: 1,400 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 1.6 kW (2.18 HP), motor manufacturer: Jungheinrich, gearing type: automatic, battery manufacturer: SBS, battery model: 24V 375Ah Bj. 2025 NEU, battery capacity: 375 Ah, remaining battery capacity: 95 %, battery voltage: 24 V, battery weight: 288 kg, DGUV certified until: 03/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), overall weight: 1,325 kg, empty load weight: 1,037 kg, total height: 2,050 mm, color: yellow, Equipment: CE marking, UVV, pallet forks, Price: €6,500 net €7,735 gross SKU: 676 Basic Information: - Manufacturer: Jungheinrich - Model: EJC 214 - Year of manufacture: 2009 - Operating hours: 4,385 h Technical Data: - Battery: 24V 375 Ah (Year 2025 – NEW) - Charger: Included Mast / Dimensions: - Overall height: 2,050 mm - Mast type: Triplex mast - Lift height: 4,700 mm - Free lift: 1,500 mm - Fork length: 1,150 mm - Rated capacity: 1,400 kg - Load center: 600 mm - Initial lift: No - Rated capacity with initial lift: No Tyres: - Type: Cushion tyres Equipment: - Scale: No - Creep speed function: Yes - Proportional lift: Yes Extras: - UVV inspection (safety check) available on request - Immediately operational - Viewing and test drive possible on site by appointment Transport: Cost-effective shipping available on request. Pgodpfx Ajywn Hyjhvei Invoice with VAT: You will always receive an invoice with VAT stated separately. Battery: We are happy to offer you a quote including a new battery as well. Contact: If you have any questions or are interested, please contact us by phone, email, or via the contact form.

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm Pgjdpjxpmtyjfx Ahvei - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland - immediately available -

Condition: used, Year of construction: 2025, color: other, empty load weight: 5 kg, mileage: 1 km, fuel type: gasoline, gearing type: other, TITLE: NEW CUSHIONED HOOK-UP CONTAINER WITH FIREPROOF TARPAULIN, HYDRAULIC RAISING AND LOWERING WITH 4 HYDRAULIC PISTONS AND REAR OPENING WITH 2 TR1 ALUMINUM DOORS WITH 1+1 TR1 SIDE SIDES REF: 22-N-110 TYPE: curtain-sided NEW: yes LID: yes OPENING: with raising and lowering OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.20 m + 0.20 m EXTERNAL WIDTH OF THE BODY: 2.55 m CUSHION HEIGHT: 2.50 m Pgjdpfx Ahov Ap Uwevei INTERNAL / EXTERNAL FRONT SIDES: 2.00 m / 2.20 m SIDES INTERNAL / EXTERNAL SIDE: 1.00 m / 1.20 m WEIGHT: 2310 kg BOTTOM FROM: 5 mm WALL FROM: aluminum COLOR: blue RAL 5010The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skip loaders, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: new, mileage: 50 km, power: 118 kW (160.44 HP), color: orange, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Engine: 3.0 L D EVIe with 118 kW (160 hp), HI-MATIC 8-speed automatic transmission, rear axle leaf spring suspension, twin rear wheels, standard chassis cab, wheelbase 3,450 mm, seat belt warning for driver and passenger, non-heated seats, seatbelt pretensioner passenger side, fabric seat covers, comfort driver’s seat with armrest and lumbar support (height, tilt, and longitudinally adjustable, hydraulically cushioned), 4G connectivity box incl. TCO service contract, front halogen headlights, daytime running lights, digital EC control unit 4.1, light and rain sensor, manual high beam control, mirrors for body width 2,350 mm, rear parking sensors, passenger-side turn assist (BSIS), lane departure warning system (LDWS), standard vehicle badge, tire pressure monitoring system (TPMS), front area monitoring system (MOIS), emergency brake assist AEBS with city brake, electrically adjustable and heated exterior mirrors, cab width 2,000 mm, driver fatigue warning system (DriverDrowsinessAttentionWarning), central locking with remote control, traffic sign recognition with intelligent speed assist (ISA), hazard warning lights, electric windows for front entry doors, left-hand drive for right-hand traffic, front airbags for driver and passenger with seatbelt pretensioners, first aid kit, pre-installation for alcohol immobilizer, speed limiter 90 km/h, spare wheel mount at rear of frame, 20 l AdBlue tank under cab, towing capacity 3.5 t, integrated 90 l fuel tank, manual central parking brake, comfort soundproofing, passenger bench seat with multifunctional storage and compartment, additional speed limiter, 12V 13-pin trailer socket, blind spot radar behind cab, reversing camera, non-deactivatable reverse warning buzzer, cab rear wall with window, additional vehicle key with remote control, leather steering wheel, USB sockets driver and passenger side, pre-installation for toll system (OBU), ball-type trailer coupling, trapezoidal spring with auxiliary rear axle spring, Eco-Smart function, option deletion, settings for special fuels (HVO/GTL), rear axle ratio i 4.556, deep orange IC 177 RAL 2011, 225/75 R16 all-season tyres, Bridgestone Duravis 225/75R16 Four Season, electronic operating and maintenance manual, USB sockets driver and passenger side, digital radio DAB with 7” touchscreen, fog lights, manual air conditioning, cruise control, and much more. Pjdpfxoywdc Ds Ahvegi We are happy to provide you with an offer for your used vehicle in part exchange. If you wish to lease or finance your vehicle, we will gladly make you a tailored offer. Subject to errors and prior sale! Mr. Rudolph will be happy to assist you by phone at: Further information can be found on our website: ... ESP, particulate filter = Further Information = Engine displacement: 2,998 cc Gross vehicle weight: 6,000 kg Cargo space dimensions (LxWxH): 3,600 x 2,250 x 400 mm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Pgodpfx Ajvuubgjhvsi Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Pgodpfx Aevuuidehvoi Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F