Used Cushions for sale (510)

Condition: used, mileage: 694,000 km, power: 265 kW (360.30 HP), first registration: 05/2014, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Mercedes-Benz Citaro C2 GÜ * MB engine, 265 kW, Euro 6 * ZF Ecolife automatic transmission * ABS, ASR * Retarder * Air conditioning * Auxiliary heater * 53 + 1 seats * 79 standing places * 3 additional folding seats * Exterior swing/sliding doors, double width * Wheelchair space / KIWA space * Wheelchair ramp at door 2 * Kneeling function, raising and lowering system * Radio, MP3, USB Lsdpfx Afoznq Avstsrp * Microphone * LED matrix display (LAWO) on 3 sides with SICMA-Control control unit * Interior displays * Fog lights * Daytime running lights * Driver's seat with air suspension, 3 air cushions, rotatable, armrests * Electrically operated front windshield roller blind * Electrically operated driver's window * Stop request brake * Stop request buttons * School bus mode * Multifunction steering wheel * USB port * Grab rails * Payment counter * Wheel hubcaps * Warning bell All information is without guarantee, subject to errors and prior sale. Viewings are possible at any time by prior arrangement! For more information, please contact us (also via WhatsApp). Information in Polish: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: used, mileage: 32,732 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,336 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0648.4418461 ----EQUIPMENT * Airbag: Thorax bag and pelvis side airbag for passenger * Airbag: Thorax bag and pelvis side airbag for driver * Seats: Two-passenger seat * Active brake assist * Rear camera (non-retractable) * Heated windshield washer system * Wooden floor (cargo area) * Interior paneling in cargo area up to roof height – wood * LED light strip in cargo area * Load securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Park – Rearview camera – PARKTRONIC * Winter package – Seat heating for driver and passenger seat – Heated washer jets – Heated steering wheel * Tire pressure monitoring – on front and rear axle (wireless) * Rear door: Rear swing doors, opening up to side wall * Seats: Driver’s seat cushion depth adjustment * Seat heating on passenger side * Seat heating on driver’s side * Blind spot assist * Full partition with 1 window * Traffic sign assist * Electronic stability program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) – Traction control system (ASR) – Electronic brake-force distribution (EBV) – Brake assist (BAS) * Electrical wiring for trailer socket – electric wiring for trailer power supply – without trailer control unit * ATTENTION ASSIST: ATTENTION ASSIST supports the driver during long, monotonous journeys by monitoring attentiveness. If signs of fatigue or increasing inattentiveness are detected, it recommends a break. * Front cup holders * Removable tow hook front/rear * Axle ratio i = 3.267 * Airbag passenger side * Airbag driver side * Exterior mirrors electrically adjustable and heated, left and right * Outside temperature display * Battery: Buffer battery for starting process * Battery: AGM 12V / 92Ah * Attachment points in the roof frame * Hill-start assist * Third brake light * Adaptive brake lights * Comfort roof control unit * Diesel particulate filter * Electronic tachometer * Light assist – automatically activated headlights * Power windows driver/passenger – with anti-trap protection, quick lowering and raising * Generator 14 V / 250 A * Generator management – Generator management helps reduce fuel consumption and CO2 emissions. The alternator is disengaged, and the onboard electronics are powered by the battery when sufficiently charged. This relieves the engine from charging the battery during acceleration, for example. During braking and overrun operation on downhill runs, the alternator is re-engaged, and the vehicle’s kinetic energy is recuperated to charge the battery. * Speed limiter 210 km/h * Transmission: 6-speed manual gearbox TSG 380 * Weight variant 2,800 kg * Seat belt reminder for passenger seat * Seat belt reminder for driver seat * Lockable glove compartment * Tailgate * Side interior paneling in cargo area Lrjdpfsxci Hcex Aftsp * Climate control – Tempmatic * Instrument cluster with pixel matrix display – Operated via multifunction steering wheel buttons – Round dials for speedometer and tachometer or fuel and coolant gauges – High-resolution white and red pixel matrix display between large round dials * Comfort driver’s seat * Comfort window opening/closing * Communication module (LTE) for digital services * Headrests (2) in front * Large fuel tank, approx. 70 liters * Solid paint * Steering wheel

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Lrsdpowlgr Rofx Aftjp Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: excellent (used), Year of construction: 2018, used vertical CNC machining center Manufacturer: Biesse Type: Skipper V31 Year of manufacture: 2018 automatic positioning of the chuck pre-positioning and zero-point detection via photoelectric cell work tables with air cushions pressure rollers and vertical pressure device optional: infeed and outfeed devices working area X 200 – 3200 mm working area Y 70 – 900 mm working area Z 10 – 00 mm working unit BH17 with: - vertical drilling spindles 10 pcs. - horizontal drilling spindles in X 4 pcs. - horizontal drilling spindles in Y 2 pcs. - groove saw 120mm diameter in X direction Lodpfszl Aqajx Aftsrp - milling spindle 4.5 kW workpiece clamping system Control/Software Biesse Works Delivery includes all tools and HSK tool holders shown in the pictures!

Condition: used, mileage: 248,660 km, power: 175 kW (237.93 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 6,500 kg, maximum load weight: 7,000 kg, overall weight: 13,500 kg, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 01/2027, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration at house, air-cushion driver's seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 6-speed manual gearbox, ABS (anti-lock braking system), retarder, constant throttle, PTO (power take-off), frame cover, differential lock, fog lights, rotating beacon, storage box, leaf suspension, trailer hitch with ball head, towing device, low-noise G1, underrun protection, roof hatch, green environmental sticker. Wheelbase: 4100 mm. Body: VDS-Construct H14II roll-off system with articulated arm for containers up to 5 m, 5.3 t front axle, rear axle H4 11 t crown wheel 390 mm, rear axle differential lock, Telma retarder AD 61-30, ABS, disc brakes front and rear axles, front underrun protection, PSM, distributor cockpit, pollen filter, on-board diagnostics 2, engine brake with constant throttle, fuel tank capacity: 125 l. Lsdpfx Aoy Ezq Ijftorp The hook height can be adjusted on request and at additional cost! Hook height approx. 1490 mm! Roller height approx. 1240 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, functionality: fully functional, mileage: 216,260 km, power: 117.68 kW (160.00 HP), first registration: 10/2021, fuel type: diesel, empty load weight: 3,200 kg, maximum load weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, energy efficiency: D, fuel tank capacity: 70 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6d, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,800 mm, total width: 2,200 mm, total height: 3,100 mm, Year of construction: 2021, operating hours: 216,260 h, Equipment: ABS, airbag, truck registration, Iveco Daily 35C16, second hand, year of manufacture 2021, first registration October 2021, manufacturer of the superstructure body is Afi Car Glina, white color, Km 216,260 km, body with controlled temperature BA04, functional aggregate Carrier Citimax 350, wheelbase 4100 mm, cylinder capacity: 2,998 cm3, power 160 HP, manual gearbox with 6+1 gears; pollution standard Euro 6, R6, has particle filter, engine version M016; engine code: F1CFL4116*M, number of passengers cabin 3, double rear axle, tires dimensions of 195/75R16C, wear between 20 and 50%, maximum technically permissible mass 3,500 kg, drives with category B, ABS, ASR, cruise control, electric windows and mirrors, central locking, seat on adjustable cushion, servo, tank capacity 70 liters, adjustable steering wheel, rear axle traction, rear lifting shutter BÄR, registered in Romania. Ljdpfx Aeznck Eeftjrp Possibility of financial leasing, minimum advance 25% for Romanian clients. Price 28,700 Euro + VAT, negotiable, Delivery Incoterms 2020, Oradea, Romania

Condition: used, mileage: 768,200 km, power: 323 kW (439.16 HP), first registration: 02/2018, fuel type: diesel, tire size: 385/55/22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, spoiler, = Additional options and accessories = - 2 x Aluminum fuel tank - Airflow package - Air horn - Beacon(s) - Cushioned seat - Drivers seat comfort 5 - Electric windows - Enhanced engine brake - Heated exterior mirrors Lodpfovy Etqex Aftjrp - Preparation OBU - Refrigerator under bed (33 liters) - Roof Spoiler - Side skirts - Steering wheel audio controls - Sun visor = More information = General information Cab: SLEEPER CAB Registration number: 93-BKK-7 Technical information Number of cylinders: 6 Engine capacity: 10.837 cc GVW: 19.000 kg Max. towing weight: 50.000 kg Drivetrain Engine type: Renault Trucks Optidriver Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55/22.5; Max. axle load: 7500 kg; Tyre profile left: 65%; Tyre profile right: 65%; Suspension: leaf suspension Rear axle: Tyre size: 315/70/22.5; Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 55%; Tyre profile left outer: 55%; Tyre profile right outer: 55%; Tyre profile right outer: 55%; Suspension: air suspension Interior Number of seats: 2

Condition: used, mileage: 512,957 km, power: 315 kW (428.28 HP), first registration: 10/2016, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 6,270 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 10,430 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,850 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Adaptive cruise control - Adjustable handlebar with neck tilt - Airflow package - Aluminum fuel tank - Audio amplifier 400 W 8 channels - Axle load indicators - Cushioned seat - Driver Deluxe Package - Dynamic steering - Electrically adjustable seats - Electric windows - Extensive exterior finish - Immobilizer - Lane Departure Warning - Lift Axle - Preparation OBU - Rear doors - Refridgerator - Refrigerator under bed (33 liters) - Remote central locking - Rest & Relax package: 2 persons - Side skirts - Sleeping cabin Lodjzm Tmzepfx Aftjrp - Sun visor - Two rear doors - Volvo engine brake plus - Work lamp(s) - Work remotely = Remarks = Superstructure Material: Aluminium = More information = Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Drivetrain Engine type: Volvo DUAL CLUTCH Axle configuration Suspension: air suspension Front axle: Tyre size: 385/65 R22.5; Max. axle load: 8000 kg Rear axle 1: Tyre size: 315/70/22.5; Double wheels; Max. axle load: 11500 kg Rear axle 2: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 12.069 kg Carrying capacity: 15.031 kg GVW: 27.000 kg Functional Make of bodywork: ROSSO & BATTAGLINO SCHUIFZEIL Layout Number of beds: 2 Maintenance APK (MOT): tested until 11/2026 Identification Registration number: BB-865-V

Condition: used, mileage: 201,000 km, power: 103 kW (140.04 HP), first registration: 10/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,650 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: Euro 5 without AdBlue! Second battery, RSD 2000 audio system (front speakers), exterior mirrors electrically adjustable and heated, main battery disconnect switch, rear roof-mounted indicator lights, entry handle on rear left D-pillar, driver assistance system: front and rear parking sensors, adjustable steering column (steering wheel), tire pressure monitoring system, full-size spare wheel, front and rear mud flaps, driver’s side front side airbag, cab seats: air-suspended driver’s seat, integrated rear step in the bumper, auxiliary hot water heater with programmable parking heater function. Further equipment: Loading area dimensions: Length: 2,600 mm, Width before wheel arches: 1,780 mm, Width between wheel arches: 1,350 mm, Height: 1,650 mm, Floor to loading area height: 670 mm, Luggage compartment volume: 7,500 l, and manufacturer’s specifications: in-house production! - 2 additional vehicle keys with remote control - Second battery with isolation relay, maintenance-free (100 Ah/450 A) - Armrest for left front seat - Electrically adjustable and heated exterior mirrors - Main battery disconnect switch - Onboard tools and jack - Rear roof marker lights, right and left - Entry handles on the rear D-pillars, left and right - All-season tires - Steering column adjustable axially and vertically - ParkPilot, front and rear - Price adjustment - Radio "RSD 2000" (2-DIN) with 4.3" monochrome display, front speakers - Radio preparation with front speakers Lrsdpfxexzl S Ss Aftop - Tire pressure monitoring system - Standard spare wheel holder - Rear mud flaps - Front mud flaps - Front and rear mud flaps - Driver’s side side airbag - Seat cushion tilt adjustment in 1st row - Steel spare wheel (full size) - Rear step integrated into the bumper - Additional water heater (5 kW) with programmable parking heater function Service recently performed in April '24 Storage: tray/flat compartment above windshield, driver’s side airbag, traction control (ASR), version: BlueMotion Technology, entry handle on rear right D-pillar, driver assistance system: brake assist (HBA), rear wing doors without windows, body/configuration: panel van, body variant: standard roof, fuel tank: 75 liters, high solid partition without window, facelift model, engine 2.0 l – 103 kW TDI, parking light circuit, wheelbase 3,250 mm, low-emission according to Euro 5 emissions standard, sliding door, loading/passenger area right, seat upholstery: fabric, front stabilizer, gross vehicle weight rating 3.5 t, additional brake light.

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Volkswagen Crafter 35 Panel Van "new model" Medium Wheelbase 3640mm, Front-wheel drive, 3,500kg permissible gross weight with high roof, 103kW/140hp, 8-speed automatic transmission in Oyster Silver Metallic Gross list new price: €69,567 incl. VAT ---- * 5 years factory warranty up to 250,000 km * 3-seater * "ergoComfort" air-suspended driver’s seat (left) with adjustable weight setting, seat cushion angle adjustment, backrest adjustment, adjustable headrests, 4-way lumbar support electrically adjustable, left armrest integrated in door trim and right armrest adjustable Lsdpfx Aowwyh Aoftjrp * Dual passenger bench seat with storage compartment and folding backrest with folding table * Fixed towbar (trailer load 3,000kg) * Manually controlled air conditioning in the cab * LED main headlights with LED daytime running lights * Front and rear parking aid * Rear View reversing camera with acoustic warning for cross traffic and pedestrians, including emergency braking system * Fixed towbar (trailer load 3,000kg) * Basic assistance package including "Intelligent Speed Assist" and cruise control * Rear wing doors with enlarged hinge opening angle * Infotainment system with 26 cm (10.4") color touchscreen, 2 USB-C data/charging ports (center console) with increased charging capacity, 2 USB-C charging ports (top of dash, windscreen area), traffic sign recognition, Wired & Wireless App-Connect Car Net for Apple Car Play and Google/Samsung Android Auto – mirror your mobile apps (e.g. Google Maps) to the in-vehicle display, digital radio reception DAB * Digital Cockpit Pro * Electrically adjustable, separately heated exterior mirrors * Full-size spare wheel in road-going tires including on-board tools and jack * Rear wing doors without window cut-outs * 75 l fuel tank * Driver and passenger airbags with passenger airbag deactivation * Hill Start Assist * Front Assist with warning and emergency braking for vehicles, pedestrians, and cyclists * Multifunction leather steering wheel with Tiptronic/shift paddles * Direct tire pressure monitoring system * Lane Keeping Assist "Lane Assist" * Storage Package 2: Roof shelf with two 1 DIN slots and reading lamp * Partition wall without window * "Keyless-Go" central locking without safe-lock function * Intermittent windshield wipers with light and rain sensors * Front bumper with body-colored painted trim * Interior grab handle (entry at partition wall) * 1 wheel chock Further equipment: Driver/passenger airbags, deactivatable passenger airbag, convex exterior mirror left, convex exterior mirror right, LED indicator lights integrated in exterior mirrors, rubber flooring in cab, aerodynamic underbody panelling, double headlights, dual-tone horn, entry handle on rear left C-pillar, entry handle rear right C-pillar, driver assistance system: hill start assist, driver assistance system: brake assist (HBA), driver fatigue detection sensor, driver assistance system: crosswind assist, electric windows front, laminated windshield, 2 folding radio keys, A-pillar grab handles, lockable glove compartment, LED interior lights in cab, LED interior lights in load/FG compartment, high-roof van body, high roof variant in vehicle color, fuel tank: 75 liters, radiator grille with upper chrome strip, adjustable steering column (steering wheel), headlight range adjustment, truck registration, Engine 2.0 l – 103

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,310 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,835 mm, fork length: 1,200 mm, empty load weight: 5,800 kg, total length: 2,500 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 700Ah Lsdpfxsx N U Dis Aftjrp Battery manufacturer: Kapatest 71% Battery year of manufacture: 2015 Description: Thorough cleaning, orange paint refresh, new seat cushion, new inspection, new acceptance according to FEM, battery regenerated. Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, impulse control, full free lift, CE certificate.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Lrjdpfx Aozldwueftep Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,521 h, load capacity: 2,000 kg, lifting height: 2,090 mm, mast type: duplex, battery model: Exide, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,150 mm, total height: 1,600 mm, total length: 2,100 mm, total width: 800 mm, Equipment: pallet forks, We offer a Atlet PDP200 from 2016 which is in good, reliable working order. The Atlet PDP series is known for its durable construction. The forklifts have left 4521 hours. Thanks to the machine's initial lift (retractable support legs) It handles uneven surfaces, ramps, and thresholds with ease, and is designed to handle two pallets at once for maximum efficiency. The model is equipped with a fold-down ride-on platform and protective side rails, making it perfect for both short and long-distance transport within the warehouse. Technical Highlights & Features: Capacity: 2,000 kg (2.0 metric tons) Lodpfx Ajzmtppoftorp Lifting height: 2,090 mm (2.09 meters) Driver Environment & Ergonomics: A foldable, cushioned ride plate and sturdy side guards provide the driver with a safe and comfortable working environment, even at higher transport speeds. Battery: Equipped with a brand-new battery A 24V 400Ah battery from Exide, which guarantees maximum uptime and many years of trouble-free use to come. The corresponding charger is, of course, included. A safe and economical investment that is ready for immediate delivery.

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l Lrjdpfx Aein Et Nsftsp pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Lredpfxoyw I T Hj Aftsp Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,339 h, load capacity: 2,000 kg, lifting height: 150 mm, fuel type: electric, battery manufacturer: Exide, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,150 mm, total height: 1,200 mm, total length: 1,900 mm, total width: 750 mm, Equipment: pallet forks, BT LPE200 (2016) in good condition We are selling a 2016 BT LPE200, designed for heavy-duty pallet handling, loading, and transport. The forklift has logged approximately 4,339 hours and is available for immediate delivery. Specifications & Features: Capacity: 2,000 kg. Battery: New 24V 400Ah lead-acid battery from Exide. Charger included. Lrjdpozmr N Ujfx Aftep Driver's environment: Equipped with a cushioned, fold-down footplate and fold-down side gates for the driver's safety. Format: With the load deck raised and the gates retracted, the truck is designed for work in tight spaces and on truck beds.

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: completely inspected + serviced Equipment and technical data: - Incl. combi unit with contact roller and sanding pad - with height-adjustable contact roller for calibrating - with workpiece-controlled air-cushion pressure pad - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed infinitely variable 2.5 - 12.5 m/min. - with roller table at the infeed - with separate additional texturing brush - with roller table at the outfeed - with digital display device for the electric-motor-driven workpiece thickness adjustment - with automatic workpiece thickness adjustment - Extraction ports 2 x 200 mm - Feed belt is OK; has a defect in one place (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Lsdpfx Afozlbpnotorp Weight approx.: 2500 kg Images show the machine in a not-yet-inspected condition! Availability: at short notice Location: Röllbach

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland Lodpfx Aoxpmtyoftjrp - immediately available -

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device Lrjdpfszk Npmsx Aftop - fitted with a rotating cleaning brush on the outlet side of the machine - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Grinding width: 1,100 mm Abrasive belt length: 1,900 mm Workpiece thickness: 3–150 mm Feed speeds: infinitely variable 2.5–13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air-cushion grinding shoe Drives: 1. Grinding unit: 15 kW Lrsdpjzk Nm Sofx Aftep 2nd grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the inlet with table extension at the outlet Total power rating: 43 kW Extraction capacity: approx. 6,750 m³/h Air velocity: 20 m/s Compressed air connection: 6–8 bar Air consumption: approx. 30 l/min Dimensions: 1,750 x 2,740 x 1,890 mm Weight: 3,100 kg Availability: at short notice Location: 65439 Flörsheim

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. • ISAS edge magazine: 28 positions (selectable edges) • Gluing unit: PU 34 system with PU melting unit (capacity up to 6 kg/h), 2 kg adhesive container, QA glue application unit • Pressure section: 4 pressure rollers • Separating agent spray unit: Top and bottom application • Joint milling unit: 2 motors, each 3 kW, 150 Hz, 9,000 rpm; pneumatically controlled for infeed milling operation • Pre-milling unit: 2 motors, each 0.55 kW, 200 Hz, 12,000 rpm; double roller tracing; electro-pneumatic retraction • End trimming unit (WK 13 – chamfer/straight): 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm; electro-pneumatic adjustment to 2 positions (flush and overhang) • Profile unit FK 11 (manual): For processing edge overhangs top/bottom and trimming front/rear edges; 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Universal milling unit UF 11: 1 motor 4 kW, 150 Hz, 9,000 rpm; swiveling 90°, electro-pneumatically controlled; HSK 63 F tool holder with push-button release • Profile scraper unit PN 10: Pneumatic adjustment for lateral retraction from the working area Ljdex D Ra Topfx Aftsrp • Finish unit FA 11 (top/bottom): Glue joint scraper; cleaning fluid application; buffing unit with 2 motors; height-adjustable with upper pressure beam • Machine control: 19-inch touchscreen operation Additional equipment • Return conveyor system: BOOMERANG ZHR05 • Inclined air cushion table: length 2,000 mm, width 1,000 mm • Conveyor belt width: 1,100 mm • Workpiece parameters: • Length: 300–2,500 mm • Width: 60–1,100 mm, or length 300–800 mm with width >1,100–2,000 mm • Thickness: 8–60 mm • For four-sided processing: Min part 300 x 300 mm; Max part 2,000 x 800 mm • Roller support rail for wide parts

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree Lredot Hw Rdjpfx Aftep X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily New Vehicle, Stock Vehicle, Immediately Available for Delivery at Special Price / Special Offer - Length: 7618 mm - Width: 2174 mm - Height: 2900 mm - Wheelbase: 4100 mm The base vehicle is extensively equipped, including: - Air suspension - Telma retarder - Additional hot water heater - Automatic air conditioning - 8-speed automatic transmission - GSR systems - Air-cushioned driver's seat with seat heating Interior conversion/modifications as follows: - Thermal and acoustic insulation - Electrically operated external swing door Ledpszmg Hzefx Aftorp - Webasto RT 145 air conditioning (dual climate control) - Ceiling duct left and right with service sets - Multi-stage night lighting - Half-level podium/no wheel arch in passenger area - Deepened luggage compartment - 22 passenger seats, GRL, adjustable backwards, with magazine net and folding table - Tour guide seat - USB ports in every passenger row - Clock in passenger compartment Net export possible

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Lrodpszmglkjfx Aftop Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 440, total length: 650 mm, total height: 1,500 mm, overall weight: 100 kg, total width: 1,100 mm, filling opening length: 650 mm, filling opening width: 450 mm, motor model: 11kW, Equipment: CE marking, RP2 Foam Shredder – Industrial Foam Grinding and Recycling Machine Professional Foam Waste Processing Solution The RP2 Foam Shredder is a heavy-duty industrial machine designed for shredding and grinding polyurethane foam (PU foam), upholstery foam, foam offcuts, production waste, and bonded foam materials. It is an ideal solution for furniture manufacturers, mattress producers, upholstery workshops, foam processing companies, and recycling facilities looking to efficiently reuse foam waste and reduce disposal costs. The machine converts foam scraps into high-quality foam flakes that can be reused for: Cushion and pillow filling Upholstery production Lodpfx Afozdra Ueterp Acoustic insulation products Rebonded foam manufacturing Packaging materials Other recycling applications Key Benefits ✔ High processing capacity – up to 10 m³/hour ✔ Suitable for soft and rigid polyurethane foam ✔ Processes foam with fabric, textile, or synthetic leather coverings ✔ Robust industrial steel construction ✔ Reliable and low-maintenance operation ✔ Easy loading and material handling ✔ Uniform output thanks to interchangeable screens ✔ Custom configurations available Technical Specifications Motor power: 11 kW Power supply: 400 V / 3 Phase Rotor diameter: 500 mm Large feeding hopper Dual material discharge outlets Single-sided cutting rotor knife Interchangeable screening system Capacity: approximately 10 m³ of foam per hour Applications: Furniture manufacturing Mattress production Upholstery workshops Foam converting industry Recycling facilities Acoustic insulation manufacturers Packaging industry Custom Manufacturing We are a manufacturer of industrial foam processing equipment and can adapt the machine to individual customer requirements. Different motor sizes, screen configurations, capacities, and customized solutions are available upon request. Why Choose RP2? Increase the value of foam waste Reduce disposal costs Improve recycling efficiency Produce reusable foam flakes for further manufacturing Reliable industrial-grade construction Direct support from the manufacturer Interested in improving your foam recycling process? Contact us for detailed specifications, pricing, delivery options, and customized solutions tailored to your production needs. Manufacturer Direct | Industrial Foam Recycling Equipment | Made in EU