Used Ctp Platesetter for sale (55)

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information Kjdpfx Asr I S H Esh Njdg

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) Kjdpowv D T Tjfx Ah Nodg - Compatible with various workflow systems - Robust construction for prepress department

Year of construction: 2004, condition: ready for operation (used), Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible. Kdodpfxsvft Rbe Ah Njg

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and screen CTP systems. Inspected and tested. Kdsdpfxsdtr A Tj Ah Nog

Condition: ready for operation (used), Year of construction: 1995, Man Roland 704-LV 1995 model 4-L 220 mil imp Ppl Cloth washing device Ir Hot air Weko powder new fiber optics Kedpfxjvu Sf No Ah Njdg --

Year of construction: 2018, condition: used, functionality: fully functional, For Sale: SCREEN PlateRite 4600S – 2018 I am offering a SCREEN PlateRite 4600S CTP system from 2018, fully operational, well‑maintained, and in very good technical condition. A reliable and efficient solution for printing companies looking to upgrade their prepress workflow. Technical Specifications - Year of manufacture: 2018 - Productivity: up to 21 plates per hour - Laser head: 32‑diode - Total plates imaged: 141,000 - Processor: Glunz & Jensen TIGER 85T - Stacker: plate stacker included - RIP: FUJIFILM XMF Kodpjx Rpauefx Ah Nedg - PC server included Condition & Availability The machine is in very good working condition and has been in continuous production. Available from February 1st, 2026.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: CTP platesetter Screen PT-R 4300S with MAL feeder / AGFA Avalon N4. Low mileage with only 54,000 plates. Kodpew Nph Iofx Ah Nedg

Condition: used, Year of construction: 2007, functionality: fully functional, Heidelberg Suprasetter A52 A74 - software fot plate sizes 52 and 74 Year: 2007 Kodpfx Ajwf Rvysh Nedg RIP Prinect MetaDimension Throughput: up to 14 plates/hour Plate sizes: min 240 x 240 mm / max 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Advand PST 26 stacker

Condition: used, Year of construction: 2008, The Heidelberg Suprasetter A52/A74, produced in 2008, is a semi-automatic thermal Computer to Plate (CtP) system designed for high-quality plate production. With a plate size capacity of 670 x 740 mm, this unit is currently in operation at a printshop in Germany. The system is integrated with the Prinekt Workflow, including modules such as Prinect Meta Shooter, Prinect Meta Rip, Prinect MetaDimension, and Prinect Signastation, as well as PDF Toolbox for streamlined prepress processes. Key features include manual plate loading and automatic plate unloading, a Glunz & Jensen C&5 rubberizing unit with plate stacker, and a TECHKON SpectroPlate printing plate measuring device for precise quality control. The machine also benefits from annual major maintenance by Heidelberg, ensuring reliable performance. The serial number for this unit is PJ000705. Format: 670 x 740 mm Equipment: CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm Mit Prinekt Workflow, Prinekt Meta Shooter, Prinekt Meta Rip, Prinekt Meta Printready Workflow, Prinek Signastaion Kdjdpfxoxpw Dce Ah Neg 64 Diodes 17 Plates/Hour at 2540 dpi PDF Toolbox, Internal plate Manual plate loading, automatic plate unloading Glunz & Jensen C&5 rubberizing unit with plate sta Printing plate measuring device TECHKON SpechtroPl Annual major maintenance Heidelberg

Condition: used, Year of construction: 2004, operating hours: 1,274 h, functionality: unexamined, machine/vehicle number: L10-2136, type of input current: three-phase, 1,274, used plates: 4,905, prior to commissioning by the current owner: 18,000 plates used, connected control PC, manufacturer: Dell, with monitor (Samsung), as well as mouse and keyboard. Kdsdpfex U Anyjx Ah Neg Printer resolution Further systems, machinery as well as office and commercial equipment available. Inspection: Thursday, 29.01.2026 from 10:00 a.m. to 1:00 p.m.

Condition: used, Year of construction: 2007, Format: 520 x 740 mm Equipment: CTP Computer-to-Plate Imagesetter For Thermal Plates Mit Prinekt Workflow, Prinekt Meta Shooter, Prinekt Meta Kdedpfsx Elwlex Ah Neg 64 Diodes 17 Plates/Hour at 2540 dpi PDF Toolbox, Interne Platten Manual plate loading, automatic plate unloading Software license only for a width of 52 cm and 74 cm

Condition: good (used), Year of construction: 2009, – Thermal CTP – Light source: 16-channel infrared laser diodes Kdjdpfsx R Ugtsx Ah Njg – Screen 4300 E single cassette loader – Stacker MDT 260 compact – Includes Fuji-RIP & PC Min. format: 304 x 370 mm Max. format: 660 x 830 mm Plate thickness: 0.15-0.30 mm Plates per hour: 11 at 2,400 dpi

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts Kdjdpfjdpxbgox Ah Njg second hand, tested or new All offers are subject to prior sale

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures. Kjdsw U Dt Ajpfx Ah Nsdg

Condition: used, Year of construction: 2007, approx: 49K Plates done RIP Prinect Meta Dimension Inlinepunch Kodpfxox H Sn Ts Ah Njdg Clean out G&J C85 unit Available: at short term

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: PJ000016, (processless) Kdsdpfx Ahovw Afxo Njg (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, external compressed air supply required XXX – suction device for removing plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 013910086, CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Kjdpfx Ahjimbp Re Nodg Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Year of construction: 2005, condition: excellent (used), machine/vehicle number: AAC02761-0502-6018 REV 3, Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device Kdsdpfxoh N Dwuj Ah Neg - Destacker - RIP

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: PJ000400, Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Kdedspahr Aopfx Ah Nog Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 023910293, Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: Kdedpfxjrigkhe Ah Njg With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) -Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: good (used), Year of construction: 2015, Offer consisting of: Plate Loader A-1 SCREEN, type: MA-L8900, year of manufacture: 2015, weight: 1,160 kg, 1 CTP Imager SCREEN type: Plate Rite HD 8900S/PT R8900, year of manufacture: 2015, imaged plates: approx. 738,000, 1 chiller REXXAM RCU-500, year of manufacture: 2015, 1 control computer SCREEN EP-B101, year of manufacture: 2015, 1 roll cart with air transport APTT 480, year of manufacture: 2022, 1 conveyor unit ADVAND MDT480, 1 plate processor GLUNZ&JENSEN, type: Quartz IV 125, year of manufacture: 2015 Kodpfxsxxylns Ah Nedg

Condition: good (used), Year of construction: 2003, Offer consisting of: Fuji plate setter, chemistry-free, PT-R4300, new computer as of May 2016, including RIP. Ksdpfx Aoxw Ia Dsh Nedg

Year of construction: 2006, condition: good (used), machine/vehicle number: PL001240 , Thermal CTP (Computer to Plate) Kdjdpfx Asfmmyzoh Nog Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1140 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2011, condition: good (used), machine/vehicle number: PU000567, Thermal CTP: Computer to Plate Recording System: External Drum Dual Casette Loader DCL 106: Two Plates With Fully Automatic loading PST 480 B Plate Stacker Technical Details: Kodpfx Aefh Dmqeh Nodg Throughput option (plates/h in max. format) : 12 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1060 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Kedpfx Aefh Dm Neh Nedg Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors