Used Cross Conveyors Feeders for sale (15,765)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: VO 113812, conveyor belt width: 600 mm, conveyor belt speed: 816 mm/s, total length: 2,400 mm, total width: 2,500 mm, total height: 3,950 mm, inner radius: 500 mm, outer radius: 1,100 mm, power: 1.1 kW (1.50 HP), input voltage: 500 V, input frequency: 50 Hz, motor manufacturer: Movimot, Equipment: safety light barrier, type plate available, Vertical transport direction: Downwards Belt speed: 40 m/min Number of spirals: 3.25 (Entry South - Exit West) Running direction: Counterclockwise Entry height: 3,700 mm Exit height: 1,000 mm Inner radius: 500 mm Outer radius: 1,100 mm Angle at inner radius: 12.7 degrees Angle at outer radius: 6 degrees Lower section covers: Yes, plastic on lower run Frame material: Bare steel, coated RAL 5010 Side guide: 150 mm 26.00 meters (belt length) JP-HDXL belt Belt width: 607 mm Color: Black Panel material: Nylon (PA6) Cross rods: Stainless steel, 6 mm in diameter Kdsdpfx Ahow Niftj Njg Every 5th panel with TPU inserts Drive: Yes, SEW Movimot (see attachment) Gear motor Movimot (1 pc.) Speed control: None – single speed with potentiometer Motor protection: IP55 Motor frequency: 50-60Hz Motor voltage: 3x400-500V Photoelectric sensor & control cabinet were retrofitted (details on request) Collection in the Frankfurt am Main area must be organized by the buyer. (All information without guarantee)

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Price: On request Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Kdodewq U Dxspfx Ah Nog Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2014, functionality: fully functional, Sliding belt conveyor, deck conveyor, VHV Anlagenbau, year of manufacture 2014, usable width 1200 mm, good condition Technical data: Manufacturer: VHV Anlagenbau Type deck conveyor Year of manufacture: 2014 Drive power: 2.2 kW Conveyor speed: 0.42 m/s Conveyor volume: approx. 3 t/h (cardboard 0-200 mm) Axle distance: 34,050 mm / 8,670 mm Belt width: 1,200 mm Gradient: 0.0° / 48°/ 17° Transfer height: approx. 4130 mm Materials: cardboard, paper, film The conveyor belt is in good condition. Due to the segment design, it can be easily adjusted. A viewing is possible at any time. If you have any questions, please do not hesitate to contact us by phone from Monday to Thursday 8 a.m. to 2 p.m. and Friday 8 a.m. to 1 p.m. Kdjdpeybb D Ejfx Ah Nog Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee.

Condition: used, Year of construction: 2001, functionality: limited functionality, Chain belt conveyor Paal, type KEM-1400, year of manufacture 2001, usable width 1400 mm Technical data: Manufacturer: Paal Type: KEM-1400 Year of manufacture: 2001 Drive power: 4 kW Speed: 0.27 m/s Axle spacing: approx. 12,000 mm Feed belt: 3,000 mm Inclined section: 6,500 mm Usable width: 1,400 mm Trough depth (horizontal/incline): 527/1027 mm Incline angle: 30° Kedpfxjybb Abj Ah Njdg Weight: approx. 5,000 kg Note: The conveyor was dismantled from ongoing operation. The chain is in poor condition and needs to be replaced. An approx. 10 m replacement chain is included in the scope of delivery. The operating manual and CE declaration are available in German. Please note: All technical data is based on manufacturer information. We do not accept any liability for the stated data or possible errors. All offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), 6 hoppers / feeders with 40 m conveyor for asphalt plant Kdsdpfx Aoyba Uvsh Nsg

Condition: used, 5328 - BUCKET CONVEYOR , BUCKET ELEVATOR , VERTICAL CONVEYOR , BUCKET ELEVATOR , BUCKET BELT Run-up height: 18 m Diameter of treck: 310 x 220 mm Overall size: 1050 x 350 mm x Full height: 26 m Voltage: 380 V Kodpfxjh D R Dde Ah Nedg

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm Kdedpfoya H H Njx Ah Nog - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2.050 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included Kdsdpfx Ahjya H H Ao Nsg - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: excellent (used), Catalogue number 7837 TECHNICAL DATA - Max. blade diameter: 450mm - Spindle diameter: 30mm - Top pneumatic hold-down - Blade guard - Blade guard also functions as a hold-down - Pneumatic blade stroke - Cutting height: 125x125mm, 100x250mm - Cutting capacity (thickness x width): 50x530mm, 100x480mm, 150x380mm, 200x200mm - Main motor: 5.6kW - Extraction port diameter: 100mm - Table dimensions (L/W): 660x480mm - Table height from base - 2 roller tables - Infeed roller table with guide: 1500mm - Outfeed roller table with guide and latch: 1500mm - Roller width: 300mm - Working pressure: 8bar - Overall machine dimensions (without roller tables) L/W/H: 940x780x1150mm - Weight approx. 450kg ADVANTAGES – German manufacture – DTR documentation – 2 roller tables – Pneumatic blade stroke – Saw used, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may change in case of significant exchange rate fluctuations) Kodpfxox Arhco Ah Nsdg

Condition: not inspected (used), table width: 450 mm, table length: 630 mm, T-slots 18 mm. Kdsdpfxsya Hu Hs Ah Njg

Condition: used, functionality: unexamined, Ferwood code: RU0011670 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 280KG - 940X91X30 Ksdpfx Ahoya Dchs Nsdg

Condition: used, functionality: unexamined, Ferwood Code: RU0011668 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Contact us. 410KG - 520X92X30 Ksdoya A Ivspfx Ah Nedg

Condition: used, functionality: unexamined, Ferwood Code: RU0011668 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Contact us. 410KG - 520X92X30 Kdedpfx Aheya Ayle Nsg

Condition: used, functionality: unexamined, Ferwood Code: RU0011667 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service; please contact us. 220KG - 300X114X30 Kdjdjya Alnepfx Ah Njg

Condition: like new (used), Conveyor to take product from 3.25m down to 0.8m. 762mm belt width. Kdjdpfxjwac D Se Ah Njg

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Ksdorq Eawjpfx Ah Njdg

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 Kjdpfx Ajhlnzkoh Njdg - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min Kodpfx Ahsyatdzj Nedg - Installed power: 0.8 KW - Location: in storage

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: - Length of conveyor: 25 mtr - Delivery to the right Kdodpfswx Ii Rox Ah Nog

Condition: good (used), Overall size: 2510 x 550 mm Roller surface size: 2000 x 420 mm Height: 940 mm Roller diameter: 50 mm Aluminum frame, stainless steel roller! Set: 15 pieces Price per piece Ksdpfxjv S Uh Ue Ah Nsdg

Condition: new, Year of construction: 2025, length in total nach Maß mm band width nach Maß mm conveying height nach Maß mm Our magnetic conveyor systems from the GERD WOLFF brand are a versatile solution for the efficient and damage-free transport of materials, including dust, shredded iron chips, and metal particles. - Contact-free transport – no direct contact between the magnetic carrier and the product or chips, preventing damage to the pallet and the conveyed material - Higher manufacturing costs due to permanently installed, high-performance neodymium magnets on the pallets - Flexible control options – via integrated, user-friendly control unit or connection to a CNC machine through a plug-in interface - High adaptability – can be tailored to specific requirements such as conveying angle, dimensions, and chip-carrying capacity - Particularly suitable for delicate or easily damaged materials - Robust construction for long service life in continuous industrial operation Kdedpfx Ahotq Duqe Nog - Low maintenance requirements – rare and straightforward servicing - Ideal for industries requiring clean, gentle, and reliable material transport

Condition: new, Year of construction: 2025, length in total 4045 mm band width 235 mm conveying height 1200 mm Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. Kdodpfjtq Dynex Ah Neg - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, Year of construction: 2025, length in total 7969 mm band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Kodotq Dy Sopfx Ah Nodg Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, Year of construction: 2025, Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General Kjdpouddbpofx Ah Nsdg - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Year of construction: 1991, condition: used, length in total 11000 mm Kodpfxsntcugj Ah Nsdg band width 200 mm Total height 630 mm length in width 400 mm ca.10 mm