Used Cross Conveyors Feeders for sale (15,103)

Year of construction: 2025, condition: new, Hello, We manufacture inclined wood feeders as well as other custom-made feeders – robust construction. Please feel free to contact us. If you have any questions or require further information, please send us a message or call us. Fgodsyk Hl Hspfx Alqjb

Condition: excellent (used), Pamasol 5934 Pneumatic feeder With 1-lane exit onto the conveyor belt Accumulation conveyors ensure an even product feed to a processing machine. - Hinged belt chain 150 mm wide - 5-lane, with 1-lane exit - Drive with infinitely variable geared motor - Suitable for continuous operation in hazardous areas - Electric drive unit Electrical connection: 3 x 400 V + N + PE, 50 Hz Fjdoqazcyopfx Alqsgb Dimensions: H x W x L 88 x 80 x 210 cm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Roller conveyor + cross conveyor + roller conveyor Fgjdok Ritpspfx Alqsb good technical condition

Condition: good (used), functionality: fully functional, rotational speed (min.): 38 rpm, rotational speed (max.): 38 rpm, type of input current: three-phase, overall weight: 1,200 kg, total length: 5,000 mm, total width: 600 mm, Direct power transmission Total length: 4000mm Trough width: 500mm Material of the conveyor screw: steel Drive motor: SEW-EURODRIVE Drive power 5.5kW Voltage: 400V Protection IP55 End bearings, Robust cast iron housing Fgjdjudk Sbspfx Alqob

Year of construction: 2010, condition: excellent (used), functionality: fully functional, vibrating feeder RNA 700mm bowl feeder RNA trough vibration feeder + linear feeder, with controller. 50 Hz nominal vibration frequency with double speed control Manufacturer: RNA Type: ESK-N80 Fedpfxoh S Il Tj Alqogb trough diameter: 700 mm voltage: 220 volts 50Hz protection: ip30 vibration: 3000 c/min vibration regulator: RNA adjustable height stand +linear dosing unit length: 1520 mm

Condition: excellent (used), Year of construction: 2000, A feed conveyor with steel hinge plate belt. It was last loaded using a wheel loader and tipper truck. Overall structural length: 9.6 m Hopper size: 8.0 x 3.6 m Conveyor width at the bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and wear-resistant roller Throughput capacity: 3 to 14 m³/hour Belt geared motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel geared motor Flender: 7.5 kW Fgedjiwxmbepfx Alqob Total weight: approx. 20 tonnes With steep conveyor belt included.

Condition: used, Multisaw cross feeder Fsdpfjnwnpqsx Alqjgb

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive Fsdetrhm Aopfx Alqogb -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dimensions: 855 x 720 x 810 mm Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow. Fgedpfow Tt S Esx Alqeb

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Fgsdpsxf Urvofx Alqsb Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: good (used), Cross chain separator conveyor 2 pieces Fjdpfx Alsndir Rsqegb Chain pairs 7 pieces Conveyor width ca. 5000 mm Working height ca. 1800 mm Fixed cross chain conveyor no 1 length ca 1000 mm Fixed cross chain conveyor no 2 length ca 500 mm Moving cross chain conveyors parts length ca. 500 mm Moving the separator parts with a hydraulic cylinders

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors - solid pin conveyor chain with gentle rollers Fgjdehmp Ibjpfx Alqjb

Condition: used, Cascade-type cross conveyor: Fgodexuip Ispfx Alqsb - total length 7250 mm - total width 2100 mm - chain pitch 300 mm - five chain sections - motor power 4 kW - six discharge chains

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Fodpfju Tg I Djx Alqsgb Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm W=60cm Fedpfsyf Nk Iox Alqegb H=100cm

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Fgsdpfxod Ecncj Alqsb Number of laser lines: 2 Weight: 485 g

Condition: like new (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 6,000 mm, conveyor belt width: 2,000 mm, Manufacturer: MB Conveyors Model: PA ALL Year of manufacture: 2018 Length: 600 cm Width: 200 cm Fodpfx Alowfym Ioqogb Conveyor belt in as-new condition! PRICE REDUCTION FROM 2950 TO 2750 EUR!!!

Condition: ready for operation (used), Year of construction: 2020, Wittmann Battenfeld N-CPR Angle Conveyor Belt 2021 Part holding length: 2300 mm Rising belt length: 2250 mm Belt width: 400 mm Fodpfjywudrsx Alqsgb Total width: 450 mm Year of manufacture: 2020 You are welcome to visit for an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT ID number is submitted. Subject to prior sale. Visit our shop and check out our other offers. Specified company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical data as well as errors in the description of the item are possible and reserved.

Condition: ready for operation (used), Year of construction: 2020, Wittmann Battenfeld N-CPR angled conveyor belt Part receptacle length: 2300 mm Inclined conveyor section: 2250 mm Fsdsywuayspfx Alqegb Belt width: 400 mm Total width: 450 mm Year of manufacture: 2020 You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Fgodpeyr Nuaofx Alqeb Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable

Condition: good (used), Year of construction: 2011, conveyor belt length: 3,100 mm, conveyor belt width: 900 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, MB Conveyors PA ALL (2011) L=310cm W=90cm H=100cm Fodpfx Ajyf Ndzslqegb

Condition: excellent (used), Year of construction: 2015, conveyor belt length: 1,500 mm, conveyor belt width: 600 mm, discharge height: 900 mm, Equipment: documentation/manual, type plate available, MB Conveyors PA ALL (2015) L= 150cm W=60cm H=90cm (adjustable) Fedpfx Aeyf Ncdelqegb

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, MB Conveyors PA ALL Ligth conveyor (2015) Fjdpfx Aeyf Nacelqjgb L=205cm W=50cm H=110cm(adjustable)

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/2000 x 440 mm - Parts pick-up 720 mm, ascending conveyor 2000 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Useful width = 440 mm Belt width = 510 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 750 mm, at 50° = 1,400 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Fedotmtzyspfx Alqogb Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/1800 x 340 mm - Parts pick-up 720 mm, ascending conveyor 1800 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Effective width = 340 mm Belt width = 410 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 650 mm, at 50° = 1,250 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request Fjdpfjtmty Eox Alqsgb FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.