Used Cpu for sale (261)

Condition: ready for operation (used), Bosch CNC CP / MEM 5 / G107 / 913572 CPU module, SN:001028510, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dsdpfxex Eqxbs Aiijcp

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm Dcodpfx Aszlz Svjiiep • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm Dodpon Nbmzsfx Aiijcp -Weight: 1.3 kg

Condition: ready for operation (used), Siemens 6FC5410-0AA00-0AA0 CPU 810D CCU1 Version: A SN:UC0001370, used, minor signs of wear, 100% functional, scope of delivery as per photos Dedpfx Asrn Enhsiiocp

Condition: ready for operation (used), Bosch CNC CP /MEM 5 / G107 / 913572 CPU module card, used, in good condition, 100% functional, scope of delivery as per photos. Djdpfx Aiex Eqxhsiocp

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Dcsdpfx Aezzawpoiiep Chameleon Linear - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Chameleon expansion magazine including base plate and glass sliding door set (magazine positions not included)

Year of construction: 2008, condition: used, Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement. Dcodpfx Ae Agwrmsiiop

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU -Manufacturer: Siemens, compact device CPU 224 Simatic S7-200 / digital I/O EM 223 -Type: 6ES7214-1BD23-0XB0 / 6ES7 223-1BF22-0XA0 -Individual components: see photos -Number: 4x module available -Price: per piece -Dimensions: 170/90/H60 mm Dcjdponbhmkjfx Aiijp -Weight: 0.5 kg/piece

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 5,500 W, number of axes: 4, Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details. Dedpfxj Agm Ias Aiiocp - Drilling Capacity in Solid Steel (St 60): 40 mm dia.- Drilling Capacity in Cast Iron (GG 22): 50 mm dia.- Tapping Capacity (Steel St 60): M 36- Tapping Capacity (Cast Iron GG 22): M 45- Tool Taper: SK 40 (DIN 69871, Form A)- Spindle Speed Range: 15 – 2,800 rpm (infinitely variable)- Spindle Motor (AC, frequency-controlled): 5.5 kW- Spindle Torque: max. 250 Nm (constant from 15 to 200 rpm)- Gearbox: 2-step automatically shifting (i_max 1:7)- Quill Feed (Z-Axis): 5 – 2,000 mm/min (infinitely variable)- Quill Travel / Stroke (Z-Axis): 200 mm- Quill Feed Force / Pressure: 12,000 N- Column Elevation / Hub (W-Axis): 410 mm- Column Diameter: 195 mm- Radial Arm Travel: 750 mm- Drilling Radius: min. 540 mm / max. 1,290 mm- Standard Work Table Dimensions: 600 x 1,200 mm (with 4 T-slots 18 mm, pitch 125 mm)- Table Height: 900 mm- Distance Spindle Nose to Table: 95 – 705 mm- Distance Spindle Nose to Floor: 995 – 1,605 mm- Maximum Workpiece Dimensions: L 2,950 mm x W 1,050 mm x H 1,350 mm- Rapid Traverse (X / Y Axis): 7.5 m/min- Rapid Traverse (Z-Axis): 5.0 m/min- Rapid Traverse (W-Axis): 3.0 m/min- Positioning Accuracy (X, Y): ± 0.075 mm- Repeatability (X, Y): ± 0.030 mm- Positioning Accuracy (Z, W): ± 0.05 mm- Repeatability (Z, W): ± 0.03 mm- Control System: 32-Bit CPU CNC Control (4 axes: X, Y, Z, W)- Screen: 9" Electroluminescent Display (EL, illuminated)- Program Memory: 2,000 NC blocks- Interfaces: V.24 / RS-232-C- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 13.0 kVA- Machine Weight: approx. 2,610 kg (with 600 x 1,200 mm table) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. Dedpfx Aezuzxhsiiscp A video demonstrating the machine's operation can be sent upon request.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm Dcsdpozvdfasfx Aiiep - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: used, functionality: fully functional, Ferwood Code: RU0005249 - Manufacturer Code: 2-083-03-0092 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - EDGE BANDER - LOADING UNLOADING HOMAG KAL-KFL - BARGSTEDT - HOMAG BAZ - If interested we offer an overhaul service, contact us. Dedpfx Ajv Ed Tasiiocp

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) Dcedpjzhbf Uefx Aiisp • Spare parts, consumables and starter kit

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication Djdpfx Ajzi S R Reiiscp • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: ready for operation (used), Marposs 6840021303 / E348 CPU M12 486 SN:25001-24555, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Dcsdpfx Aijx Et H Isisp

Year of construction: 2022, operating hours: 1,529 h, condition: ready for operation (used), Optical measurement machine manufactured in 2022. This ZEISS ATOS Q 12M features dual 12-megapixel CMOS cameras with a resolution of 4112 x 3008 pixels. It includes multiple measurement volumes, with the largest measuring 500 x 370 x 320 mm. The system operates efficiently with a maximum rotary table load capacity of 150 kg. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS ATOS Q 12M machine we have for sale. Contact us for further details. - Camera Resolution: 2 x 12-Megapixel CMOS Cameras (4112 x 3008 pixels)- Operating/Worktime Hours: 1,529 h (Overall work time / Overhaul work time)- Measurement Volumes (MV) & Specifications:* MV50: 50 x 35 x 20 mm; Point Spacing (12M): 0.012 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 90 mm; Projector Lens Focal Length: 60 mm; Ref Points: Ø 0.4 mm; Calib Object: CP40/MV60* MV100: 100 x 70 x 60 mm; Point Spacing (12M): 0.029 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 50 mm; Projector Lens Focal Length: 27 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV100* MV170: 170 x 130 x 130 mm; Point Spacing (12M): 0.044 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 35 mm; Projector Lens Focal Length: 20 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV170* MV270: 270 x 200 x 200 mm; Point Spacing (12M): 0.064 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 25 mm; Projector Lens Focal Length: 14 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV350: 350 x 260 x 260 mm; Point Spacing (12M): 0.091 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 16 mm; Projector Lens Focal Length: 10 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV500: 500 x 370 x 320 mm; Point Spacing (12M): 0.124 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 12 mm; Projector Lens Focal Length: 6 mm; Ref Points: Ø 3.0 mm; Calib Object: CP40/MV560- Actual System Operating Temperatures (Status Screen):* temp0 Monoboard: 44.0 °C* temp1 Timber: 25.5 °C* temp2 Air: 21.7 °C* temp3 LED: 36.0 °C* temp4 Frame-P: 27.8 °C* temp5 DMD-P: 29.4 °C* temp6 Lens: 29.7 °C- Fan Speeds: Electronic Fan: 4237 RPM; Lamp Fan: 4359 RPM- System Orientation: Pitch: 14.9°; Roll: -3.7°- Rotary Table Load Capacity: Max. 150 kg (or max. 40 kg depending on setup configuration)- Tilt and Swivel Unit Load Capacity: Max. 5 kg- Mobile Workstation Laptop Spec (Dell Precision 7760): 17" Display, 64-bit Intel 2.6 GHz Octa-Core CPU, 64 GB RAM, NVIDIA Quadro OpenGL Graphics, 1 TB SSD, I/O: Wi-Fi, LAN, 3x USB 3.2 / Thunderbolt 4- Included Accessories & Equipment: Tripod, 4 measurement fields (MV50, MV100, MV270, MV500) with calibration plates, Rotary/pan unit with lift, Rotary table with 19" control unit, Mobile controller, Converter box with image processing card (fiber optic to Thunderbolt 3), Carrying case, Power supply, Dongle-based software license Dcedjz D Etrspfx Aiiep

Condition: ready for operation (used), Motorola M68VECPU CPU - board Serial number: G662, used, in good condition, 100% functional, scope of delivery as per photos. Djdpfxox Et Nis Aiiocp

Condition: ready for operation (used), Kontron CP6500-V / 31.251-1010.1/L01 control unit / CPU SN: 252935022, used, good condition, 100% functional, scope of delivery as per photos Dsdpex Et Dmefx Aiiecp

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. Dedpfozw H Efsx Aiiscp - CNC Potting & Dosing System- Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4

Condition: used, Year of construction: 2002, Automatic pallet strapping system KZD-311 with strapping unit model KSR The system is designed for strapping the following package dimensions: Product to be strapped: empty cans stacked on pallets Pallet dimensions: Length: min. 1,250 mm max. 1,450 mm Width: min. 1,120 mm max. 1,150 mm Height: 145 mm clearance height: 80 mm for passage of the strap guide tongue top board height: 22 mm Load dimensions including pallet: Length: min. 1,250 mm max. 1,450 mm Width: min. 1,120 mm max. 1,150 mm Height: min. 1,000 mm max. 3,000 mm Weight: min. approx. 150 kg / pallet max. approx. 350 kg / pallet Top board support: wooden frame, length x width = pallet dimensions Interlayers made of solid cardboard or hardboard: Length: 1,250 mm – 1,450 mm Width: 1,120 mm – 1,150 mm Thickness: 1 mm each System dimensions: Height of the strapping system from floor level to top of column: 4,600 mm Passage height to top of mounting plate: 3,360 mm Overall width: 5,330 mm Passage width: 1,860 mm Length of pressure plate: 663 mm Pressing force adjustable: 0 – 1,000 – 2,000 – 3,000 N via selector switch Drive of the pressure plate: via geared brake motor Pressure plate speed: 135 mm/s Technical data: Strapping unit: model KSR Strap tension continuously adjustable: 200 – 2,000 N Strap feed speed: 4.6 m/s Welding principle: long friction welding Unit arrangement: side Travel distance to package: max. 500 mm Limit switch activation: unit on the package Electrical data: Operating voltage: 3/N/PE, 400 V, 50 Hz Control voltage: 24 V, DC Total connected load: 4.5 kVA Performance: Number of pallets per hour: approx. 15 (3.5 minutes per pallet) Number of straps: 2 x across / 2 x lengthwise 3 x across / 2 x lengthwise Paint finish: Paint finish of the system: RAL 5010 – Gentian Blue Paint finish of the control cabinet: RAL 7035 – Light Grey Paint finish of the safety guard: RAL 1023 – Traffic Yellow Strapping material: Quality of the strapping band: PET / PP, set to PET, type KE 1200 A – GR – MF Width of the strapping band: 12.0 mm x 0.5-1.0 mm (band thickness can be adjusted) Main components: • System base frame with welded support column and guide rails for mounting the lifting carriage • Lifting carriage with eccentric rollers • Rack • Pinion • pole-switchable geared brake motor • complete plastic band guide • 1 holding-down pressure plate • Pressing force 0 N – 1,000 N – 2,000 N – 3,000 N • 2 flap openers • proximity light barrier for height pallet detection • electrically driven traveling carriage for the strapping unit, stroke = 500 mm • electrically driven strap guide tongue • automatic strapping unit model KSR with strap tension compensation • band uncoiler, model KA-400-E • freely programmable Siemens S7 controller with CPU 314 / OP 7 • Cable length from system to control panel = 5.0 m • Lifting carriage always moves to the home position after strapping • Operation via switch, button and indicator light (OP 7 only for text display) • Fault messages via clear text display Siemens OP 7 • Strap tension – digital display via clear text display Siemens OP 7 • Potentiometer for strap tension control in the control panel cover Dcodpfx Aijzwqxpeisp • Band retraction via frequency converter • safety guard, complete • table labeling: German • wiring diagram: German • documentation 2-fold German

Condition: ready for operation (used), Siemens 6ES7511-1CK00-0AB0 Compact CPU 1511C-1 PN, version: 03, SN: C-JDM85815, used, in good condition, fully functional, scope of delivery as shown in the photos. Dodpfex Euqzjx Aiiecp

Condition: good (used), PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Central processing unit CPU 315-2 Simatic S7-300 Dodpfx Aionbhkwoiecp -Type: 6ES7 315-2AF03-0AB0 -Quantity: 1 module available -Dimensions: 120/80/H125 mm -Weight: 0.5 kg

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm Dcjdezbiybopfx Aiiep • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: good (used), PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic S5-100U CPU 102 -Type: 6ES5 102-8MA02 -Number: 2x module available -Price per piece Djdpfjh A Scbsx Aiiecp -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/pc.

Year of construction: 2004, condition: used, Capacity: 1050-4500pcs/h, adjustable proofing times: 2.5min/5min/7.5min/10min, weight range: 300-1400g, control: Siemens CPU 314C-2 DP. The proofing cabinet is equipped with a reinforced basket drying system, but without heating or steam injection. Documentation available. An on-site inspection is possible. Dsdoz Hn Scopfx Aiiscp