Used Cpu for sale (248)

Condition: ready for operation (used), Indramat CPUB 02-01-FW 261366 Serial Interface, key switch defective see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gsdpji Ebb Rofx Acweir

Condition: new, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional Gisdpfx Asi Ea Emocwsr

Condition: new, Heller CANCPU A 23 Uni Pro PLC 90 < unused > 100% functional Gsdei Ea Euspfx Acwjir

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 Version 1 SN 73755, used, in good condition, 100% functional, scope of delivery as shown in photos. Gsdpfx Acex Eu Itewsir

Condition: ready for operation (used), Heller CPU91 CNC G 23 Uni Pro CNC 90 Board used 100 % functional Gedpfx Acji Ea E Ajwsir

Condition: ready for operation (used), Bosch SM 20 / 30 GTC - SM 20/30 GTC pulse inverter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Giodpfx Acsi D Udcjwjr

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 version 1 SN 73756, used, in good condition, 100% functional, delivery as per photos Godpfjx Dxl Rox Acwoir

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Gjdsvf Hhyopfx Acwjir Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, B&R 2005 CPU260 interface processor- housing intact or renewed Giedpfsp Rb E Rsx Acwer - compatible with all B&R 2005 controllers - removed from K-Tech 200 - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R type: B&R 2005 manufacturer no.: 3CP26 spare part no.: 10079382 Dition: gebraucht

Condition: ready for operation (used), SONPLAS SPS_CPU v1_20, used, good condition, 100% functional, scope of delivery as per photos Godpfoxah H Nsx Acwoir

Condition: ready for operation (used), SONPLAS SPS_CPU V1_30 control card, used, good condition, 100% functional, scope of delivery as per photos Gisdpfx Acexah Iaowjr

Condition: ready for operation (used), SONPLAS SPS_CPU V1_30 control card, used, good condition, 100% functional, scope of delivery as per photos Gjdpexah Igefx Acweir

Condition: like new (used), Year of construction: 2009, functionality: fully functional, We are selling this grinding machine, which is connected and available for testing. Gjdpfxsxxrzzo Acwsir Machine parameters: - Grinding of rotational parts clamped between centers with an accuracy of 0.001 mm - Max. swing diameter: 0–1,450 mm - Max. turning length: 6,000 mm - Max. workpiece weight: 20,000 kg (25,000 kg with steady rests) - Grinding wheel diameter: 915 mm - Wheel width: 100 mm - Non-contact measurement of dimensions, tolerances, and workpiece geometry, including printout of measurement protocol - 100% ultrasonic measurement possible - CNC control with capability for profile grinding (taper, concave and convex, CVC) - Grinding of ceramic and metallic coatings using diamond and ceramic grinding wheels The machine is currently completing an order.

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR Giodoxf Nvpspfx Acwjr The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Godpfst Evzrjx Acwsir Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,610 mm, number of axes: 6, This 6-axis KUKA KR 16 was manufactured in 2013. It features a maximum reach of approximately 1610 mm and a payload capacity of around 16 kg. The robot arm is designed for versatility, allowing for floor or ceiling mounting. If you are looking to get high-quality automation capabilities, consider the KUKA KR 16 robot arm we have for sale. Contact us for further details. • 2x units available • Payload: approx. 16 kg (KR 16 series standard) • Repeatability: ±0.05 mm • Maximum reach: approx. 1610 mm • Mounting position: floor or ceiling • Additional arm load: 10 kg (additional load on arm variable) • Maximum total load: 46 kg • Axis ranges: • Axis 1: ±185° • Axis 2: +35° to −155° • Axis 3: +154° to −130° • Axis 4: ±350° • Axis 5: ±130° Gsdpfeyz Ti Ujx Acwoir • Axis 6: ±350° • Axis speeds: • Axis 1: approx. 156 °/s • Axis 2: approx. 156 °/s • Axis 3: approx. 156 °/s • Axis 4: approx. 330 °/s • Axis 5: approx. 330 °/s • Axis 6: approx. 615 °/s • Protection class: IP65 (robot) • Operating temperature: +5 °C to +55 °C • Storage temperature: −20 °C to +60 °C • Drive system/technology: AC brushless servo motors • Gear system: maintenance-free gear units • Brake system: motor holding brakes on all axes • Power supply: 3-phase AC (via KRC2 controller) • Controller: KRC2 • PC CPU: Celeron 2.0 GHz • RAM: DDR 512 MB • Software: KRC V5.6.10 Build 54 • Programming: via KUKA KCP teach pendant • Installation environment: industrial • Robot structure: cast light alloy construction

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65,000 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It includes a robust control system (TASC3) and operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details. • Electrical Gjdpfxoyzymge Acweir • Supply voltage: 400 V • Phases: 3-phase AC • Frequency: 50 Hz • Rated power: 73 kVA • Rated current: 105 A • Maximum fuse protection: 125 A • Control voltage: 24 V DC • Control • Control system: TASC3 • Control software version: 2.4 • Laser performance • CW mode power: • 100%: 3208 W • 85%: 2756 W • 75%: 2407 W • Pulsed (5 kHz) power: • 100%: 3208 W • 75%: 2416 W • 50%: 1610 W • 25%: 810 W • 10%: 328 W • 5%: 157 W • 1%: 0 W • RF/drive • Reflected RF power: 0.3 kW • Maximum CW RF amplitude: 100% • Switching frequency (CW): 50 kHz • Maximum pulse voltage: 10,000 V • Pressure and leakage • Operating pressure limits: 20.01–27.00 kPa • Maximum turbine pressure: 200 hPa • Leakage rate: 0.04 hPa/min • Thermal/CPU • Maximum CPU temperature: 49 °C • Actual CPU temperature: 43 °C • Optics/Alignment • Maximum beam alignment time: 600 s • Hours • Spindle hours: 65,000 h Additional equipment • RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3 • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Nominal current: 42 A • Protection class: IP54 • Refrigerant: R134a • Refrigerant charge: 11.5 kg • Maximum water pressure: 20.2 bar

Condition: repair required (used), Year of construction: 1990, functionality: not functional, machine/vehicle number: 418.364.077, drilling depth: 800 mm, feed length Z-axis: 1,000 mm, total length: 4,200 mm, total width: 2,100 mm, total height: 2,800 mm, workpiece weight (max.): 500 kg, overall weight: 7,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 7,000 rpm, drill diameter: 25 mm, type of input current: three-phase, number of spindles: 1, feed length W-axis: 120 mm, TBT - Deep hole drilling machine, single spindle, with CNC cross table, "x/y" axes and "W" positioning slide! Control: EST - Error in CPU rack. Machine is not operational. Giedpfxsyz Rd Ne Acwer All actuators/hardware were functional until decommissioning. The rack error occurred during the downtime after decommissioning. Power electronics/inverter: Bosch Clamping table and various accessories Dismantling preferably by the buyer; machine components (control cabinet, body, oil tank) can be placed onto machinery skates using the existing hall crane, but loading inside the hall is not possible! Dismantling and loading upon agreement. Transport exclusively by the buyer.

Year of construction: 2010, condition: excellent (used), Complete euroblock cheese production line designed for efficient processing of milk into Euroblock cheeses. The system can be easily expanded to produce various sizes of round cheeses with a weight of approximately 4–5 kg. It can process 6.000 liters of milk per batch, up to 4 batches a day. The line exists out of: Milk reception (by a mobile centrifugal pump) Milk receiving pump from the truck or truck with pump unloaded itself. 1. 2 pieces raw milk storage tanks (refrigerated), 6.000 liter per tank. • Manufacturer: Mueller • Year of make: 2012 • Horizontal, insulated and cooled milk storage tank, cip cleanable. • Cooling compressor Freon Giedjyzxdkopfx Acwer 2. Milk reception valves • Valve manifold to automatically send the milk to the selected tank, to pump the milk from the tank into the pasteurizer and to CIP (cleanable). • Set of 4-way butterfly valves with controls. • Manufacturer: GEA – Tuchenhagen 3. Complete pasteurize installation • Manufacturer: C van ’t Riet • Year of make: 1996 • Capacity: 6.000 liter • Complete on a skid. • With Balance tank, pumps, heat exchanger, holding tube, hot water control, valve interconnecting piping. Control system with temperature recorder. • In 4-65/75°C Holding tube -> 25/35°C cheese-making temperature. 4. Buffer tank for pasteurized milk 6.500 liter. • Manufacturer: Zero • Top insulated • Function: To store/ buffer warm milk so that the pasteurizer can continue running and two batches can be processed more quickly directly after each other. 5. Cheese vat • Manufacturer: Damrow (Gea) Double 'O' • Volume: 6.000 liter per batch • Closed cheesevat with whey extraction sieve from above. • Self-priming pump for cip and whey. • Placed on a stainless-steel frame for a free fall to the drainage tank. • Separate control system. • Valve manifold (Tuchenhagen) for importing milk from a pasteurizer or buffer tank, valved design so buffertank can independently be cleanded. 6. Automatic prepressing and cutting vat • Manufacturer: C van ’t Riet • Year of make: 2010 • Including CIP-pump • Capacity of the curd mixture 6.000-liter vat (for curd processing) • Transfer from curd vat: by gravity • Number of cheeses from 6000 liter: 42 cheeses of 15 kg (approximately) 7. Pressing system • Tunnel press, 42 positions for euroblock. • Pall lane system by pneumatic cylinders to convey the moulds automatic in and out of the press. With controls and press program. 8. Moulds • Micro-perforated LAUDE moulds, 15 kg euroblock. • Molds have been partially replaced and are only a few years old. 9. Mould washing • 2 pieces of mould washing bassins 10. Brine • 8 pieces brine cages/racks (without brine boxes, those are cast in concrete) • 2 pieces brine cooling compressor and tanks (on top) 11. Whey tank • Horizontal whey tank (+/- 7.000-liter capacity) 12. CIP-system (fully automatic Siemens S7) • Consisting one tank with three compartments • Heat exchanger • Automatic valves • CIP pressure pump • The entire pre-factory has a fully automatic CIP and automatic control CPU Siemens S7 (support from the original supplier is possible/delivered by Gea)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C099J132558, number of ink cartridges: 4, paper weight (min.): 53 g/m², paper weight (max.): 360 g/m², total length: 880 mm, total width: 799 mm, total height: 1,230 mm, Ricoh Pro C5210S + Booklet Finisher SR5080 + Decurl Dnit DU5020 + Large Capacity Tray LCIT RT4020 + Color Controller E-24B Print documents at 80 pages per minute. Specification: Print/Copy Process: 4 drum dry electrostatic transfer system with internal transfer belt Fusing: Oil-less belt fusing method System Memory/RAM: 640 GB (320 GB x 2) Document Feeder: 220-Sheet ADF with single-pass color duplex scanning at up to 220 ipm Print Resolution: 1200 x 4800 dpi Scan Resolution: 600 dpi Scan Speed (B&W): 110 ipm (simplex) / 220 ipm (duplex) Gedpfoyzrmrsx Acwoir Max. Print Area: 323 mm x 480 mm Warm-Up Time: Less than120 seconds Output Speed: Pro C5200s: 65 ppm (FC/B&W) Pro C5210s: 80 ppm (FC/B&W) Paper Capacity: Tray 1: 1,250 x 2 Trays 2 – 3: 550 x 2 Bypass Tray: 250 sheets; Supports duplex Total Standard/ Max. Capacity: 3,850/ 8,250 sheets Paper Size: A6 to SRA3, Length up to 1,260 mm Paper Weight: Standard Trays: 52.3 - 300.0 gsm Bypass Tray (std): 52.3 - 360.0 gsm A4/LT Tray (opt): 52.3 - 216.0 gsm SRA3 Tray (opt): 52.3 - 300 gsm Max. Monthly Volume: 150,000 pages per month Max Power Consumption: Less than 2,400 W Dimensions (WxDxH): 799 x 880 x 1,230 mm (incl. ADF) Weight: Less than 262 kg The device is fully functional, ready for use The condition of the toners is as in the attached photos Counter: Total full color: 268,138 pages Total black and white: 45,337 pages Fiery E-24B Color Controller Specifications Controller Type: Embedded Type Fiery Plaform: Fiery FS200 CPU: Intel G1820 2.7 GHz Host Interface: 1000Base-T/100Base-TX/10Base-T Ethernet x 2 Memory: 2 GB Inrernal HDD: 500 GB Operating System: Linux Network Protocol: TCP/IP (IPv4/IPv6), SMB Printer Description: Adobe PostScript 3 (std.), PCL6/5c (std.) Max Print Resolution: 1200 x 4800 dpi Scan Resolution: Up to 600 dpi Fonts: PS3: 138 fonts/PCL: 80 AGFA fonts Operation Panel: Via touch panel display on the MFP Utilities: Standard: Command WorkStation 5, Fiery Scan, Printer Delete Utility, Fiery Web Tools, Fiery VUE, Secure Print Optional: Fiery Impose, Fiery Compose, Color Profiler Suite ES-2000, Productivity Package, Spot On, Hot Folders, Auto Trap Color Management Tools: ColorWise Calibration: ES-2000 (opt.) Power Requirements: 100–240 V/3.0A/50-60 Hz Max. Power Consumption: 180 W Dimensions (WxDxH) : 124.3 x 362.5 x 294.6 mm Weight: 5.5 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Gsdjyxw Ddjpfx Acwsir Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Robosoft, control rack from press brake HACO type PPES 30135 -Type: PC 10-39 -Power supply card: 338-0180V2 Gedpord Admjfx Acweir -CPU card: 338-0159V2 -Power supply card: 338-0200V3 -Individual components: see photos -Price/sale: complete -Dimensions: 315/215/H210 mm -Weight: 5.1 kg

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Gisdpoxhgfgsfx Acwor Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gjdpfxexwaz He Acwsir

Condition: new, Year of construction: 2021, machine/vehicle number: KA 8, 2/33/008/21, VO-DA, 2/06/009/21, For sale: one automatic carton erector with volume optimizer. The machines are still in their original packaging and have never been used. Gsdpfx Acjyxmdgoweir Carton Erector: Machine specifications: Machine no.: KA 8, 2/33/008/21 Year of manufacture: 2021 Dimensions (LxWxH): 3,500 x 2,380 x 2,450 mm Weight: 2,100 kg Electrical connection: 400 V, 50 Hz, 12 kW Output: 13 cartons/minute Carton processing: Carton sizes (LxWxH): 385 x 285 x 200 up to 590 x 385 x 350 mm Tolerance for carton sizes: +/- 5 mm Carton quality: single-wall B or C flute Suitable for blanks according to FEFCO 0200 Machine components: Frame Carton magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 80 kg Carton conveyor Folding unit Gluing station Glue applicator Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance Volume Optimizer: Machine specifications: Machine no.: VO-DA, 2 Year of manufacture: 2021 Dimensions (LxWxH): 5,600 x 2,200 x 2,960 mm Weight: 2,900 kg Electrical connection: 400 V, 50 Hz, 32.5 kW Output: 11-12 cartons/minute Carton processing: Carton sizes (LxWxH): 400 × 300 × 200/300 mm Tolerance for carton sizes: +/- 15 mm Processing of carton blanks according to FEFCO 0200 Use of lid blanks according to FEFCO 0458, glued onto the carton Machine components: Magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 200 kg Indexing/transfer station, minimizing station, folding station, and lid application Frame and safety guarding (LxWxH): 1,400 x 1,300 x 1,200 mm, weight 150 kg Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance