Used Copying Lathe for sale (5,684)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg. Rsdpfxox Ryrhs Amyjcd

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. Rcsdpezpfgfsfx Amyod ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, turning diameter: 630 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, spindle motor power: 18,500 W, total height: 1,765 mm, total length: 3,700 mm, total width: 2,290 mm, workpiece weight (max.): 600 kg, spindle nose: D1-8, Equipment: documentation/manual, - A 2003 model of a single-slide lathe is for sale. - Complete documentation, including all maintenance reports, is available. - Chip conveyor included. Rodpfxszqzx Hs Amyscd - New cutting tool is available. - VDI documentation is included. - Ready for production. - Available immediately. - SIEMENS 810 control system. - Self-centering steady rest.

Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces. Key Features Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping. Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation. Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy. Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times. Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life. 103 mm spindle bore allows machining of long and large-diameter workpieces. 3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy. Construction and Technology The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity. The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity. Machining Capabilities The machine is capable of performing a wide range of machining operations, including: Rough and finish turning Metric, imperial, module, and DP thread cutting Drilling and boring Taper turning Facing operations With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish. Technical Specifications Distance Between Centres 2,000 mm Centre Height 280 mm Swing Over Bed 560 mm Swing Over Gap 785 mm Swing Over Cross Slide 355 mm Bed Width 350 mm Spindle Bore 103 mm Spindle Nose Camlock D1-8 Spindle Speeds 12 speeds, 25–1,600 rpm Maximum Tool Size 25 × 25 mm Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev Cross Feed Range 35 feeds, 0.020–0.573 mm/rev Metric Thread Range 47 pitches, 0.2–14 mm Imperial Thread Range 60 pitches, 2–112 TPI Module Thread Range 39 pitches, 0.1–7 Module Redpfx Aszqzxmomyjcd Diametral Pitch Thread Range 50 pitches, 4–112 DP Tailstock Quill Diameter 75 mm Tailstock Quill Travel 180 mm Tailstock Taper MT5 Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP) Coolant Pump Motor 0.1 kW Machine Dimensions 3340 × 1150 × 1460 mm Weight 2,940 kg Standard Equipment 315 mm 3-jaw self-centering chuck (PO3-315 / D8) 350 mm 4-jaw independent chuck (K72-350 / D8) Service tool kit 450 mm faceplate Fixed steady rest (capacity up to Ø180 mm) Travelling steady rest (capacity up to Ø120 mm) Two dead centres CE-compliant electromagnetic foot brake Electromechanical spindle brake Filled with Shell Tellus 46 hydraulic oil Rapid traverse system Coolant system Halogen work light Change gears Chip tray 3-axis Digital Readout (DRO)

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Rsdjzqzi Ejpfx Amyecd Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: ready for operation (used), Immediately available from a workshop employing people with disabilities: L & Z lathe, Voest Apollo Type DA 260 / 71 Year of manufacture 1978 Center height 260 mm Diameter over bed 520 mm Distance between centers 1500 mm Spindle bore 71 mm Rcjdpfx Amjzqytijyed Diameter over cross slide 350 mm Drive power 7.5 kW Numerous accessories: 3 chucks, faceplate, 3 steady rests, Multifix with inserts Price: EUR 2,750.00 plus VAT, ex works

Condition: used, Year of construction: 2000, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2000 Control : Siemens 840D - Powerline Turning diam. : 150 mm Mainspindle: Speed:5.000 rpm Power (max.):25 kW Torque (max.):263 Nm Barcapacity:65 mm Subspindle: Speed:5.000 rpm Power (max.):25 kW Torque (max.):263 Nm Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Rcsdpfxezpczms Amysd Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pumps Rawmaterialfeed:Interface Barloader : Attention:Displayed Clamping devices and tools are NOT included in our offer!

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW Redpfevwgpbex Amyscd quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus Redpfx Asx U Encsmyecd total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: excellent (used), Year of construction: 2008, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Redpovwgmyjfx Amyocd Control YASKAWA SIEMENS 840 DI V2 clamping diameter 32 mm spindle turning speed range 7000 U/min workpiece length - max. 150 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm Rodpfx Asvwgmaemyjcd turning diameter over slide rest 215 mm turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm Rcsdpjxq Hk Uefx Amyod spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: good (used), turning diameter over bed 430 mm Rodsy Hxq Uepfx Amyscd turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: good (used), Year of construction: 2013, turning diameter over bed 520 mm turning diameter over slide rest 330 mm turning length 1500 mm spindle bore 80 mm spindle turning speed - stepless 20-2000 U/min Rcodpjzl Hb Njfx Amysd spindle drive 7,5 kW weight of the machine ca. 2,2 t

Condition: new, WORKING RANGE TURNING / - swing diameter (max) 520 mm - turning diameter (max) 260 mm - worpiece length max. 1500 mm MAIN SPINDLE - spindle bore diameter 78 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 Rsdpfx Amefcqtdoyscd - spindle diameter 78 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r - pitch of spindle 6 mm TAILSTOCK - sleeve diameter 68 mm - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - total weight approx. 1810 kg

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: Rodpfx Amjfcqtcjyscd - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: used, Year of construction: 2006, Doosan Puma 240B CNC Lathe (2006) With Dusan Fanuc i-Series Controller Bar feeder and chip auger Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale. Rjdpszpaxcjfx Amyecd

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Rjdpfxjzqvhve Amyscd

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H Rcsdpjzn N R Eofx Amyed C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Rjdpfey Igz Dsx Amyecd Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 1989, functionality: unexamined, machine/vehicle number: 8933292, Used machine, comes with many tools and spare parts. Cannot be tested. Rcodpfx Amjzqu Afeyjd Pickup only.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you Rcedjyalulopfx Amyjd

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, Rcjdpfx Amoyaluroyed We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: new, Year of construction: 2026, Industrial universal lathe with speed adjustment from from 8 rpm. Turning diameter – 500 mm, 1500 mm turning length, 105 mm spindle bore. Machine features Modern industrial universal lathe, easy in handling, equipped with a 3 axes digital readout. Useful in renovation and tool departments as well as in high quantity production. Wide area of application, including mechanical engineering, manufacturing, high quantity machining, training workshops, etc. Removable bridge allows for machining elements of large diameter Modern bearing of the main arbor with ball bearings Central system of switching feeds, a lead screw and a lead shaft for threading Accurate speed and feed adjustment Bed of the machine is torsion-resistant and vibration-free, providing basic grounds for accurate turning Technical data Swing over bed 500 mm with LCD readout Swing over cross slide 300 mm Turning diameter over bridge gap 710 mm Turning length over bridge gap 240 mm Centres distance 1500 mm Bed inductively hardened Bed width 400 mm Lathe chuck diameter 315 mm Spindle bore diameter 105 mm Spindle mount D1-8 CAMLOCK Spindle taper MK6 Spindle speed 36–1600 rpm (12 levels) Maximum tool dimensions 25×25 mm Longitudinal feed range 0.063–2.52 mm/turn Transverse feed range 0.027–1.07 mm/turn Metric thread 1–14 mm (22 types) Inch thread 28–2 stroke/inch (25 types) Modular thread 0.5–7 mm (18 types) D.P. thread 56–4 D.P. (24 types) Rapid longitudinal feed longitudinal – 4.5 m/min, transverse – 1.9 m/min Tailstock quill diameter 75 mm Tailstock quill stroke 150 mm Tailstock taper MK5 Digital readout for 3 axes Main motor power 7.5 kW Coolant pump power 0.09 kW Overall dimensions 3132×975×1270 mm Net weight 3300 kg (3800 gross) Default equipment 3 axes digital readout Ø315 mm self-centering 3-jaw chuck Ø400 mm independent 4-jaw chuck Face plate Follow rest Steady rest Spindle reducing sleeve Dead centre Cross slide rapid feed Foot emergency brake Chips guard on the whole lathe length Newest guard covers EC regulation compliant Cooling system 24V halogen lighting Indicator / gauge for threads Redpfx Amoi Apqljyecd Set of handling tools User manual EC declaration of conformity For more information you can visit our web page.

Condition: used, Year of construction: 2026, One of our best-selling conventional lathes, this lathe can be used for many tasks such as turning internal and external surfaces as well as tapers, polishing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1000 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Rcodpey Tkccefx Amyed Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power (S1/S6) 2.2/3.3 kW Flood coolant pump power 0.1 kW Dimensions 1940×850×1320 mm Weight 1590 kg Default equipment 200 mm 3-jaw lathe chuck 250 mm 4-jaw lathe chuck 3 axes digital readout Face plate Steady rest Follow rest Spindle reducing sleeve Dead centre Change gears for the swing-frame of the gear train Cooling system Lighting installation Thread indicator (gauge) Lathe equipped with an electromechanical foot brake compliant with EC regulations Chips container Set of handling tools Protective guards compliant with the newest EC regulation User manual EC declaration of conformity PLEASE NOTE!!! This machine is a return item; it shows visible signs of use and is heavily worn. No warranty!