Used Copy Milling for sale (9,921)

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: completely inspected by the workshop Table size 2000 x 880 mm (entire table in a cast construction) with extendable frame support Drive motor with pole change, 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Vertical adjustment of the milling spindle 110 mm Swivel angle of the milling spindle 45° with Holz Her 3-roller feed mechanism Ibsdpfxsz Dcp Do Apcjb Pictures show the machine in a condition prior to refurbishment. Availability: approximately 3-4 weeks after order receipt Location: Flörsheim

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1310031108, TECHNICAL DETAILS Travel range, X-axis: 7,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Rapid traverse rate, all axes: max. 60 m/min Spindle speed: max. 6,000 rpm Spindle power: 5.5 kW Ibodpfx Aszxngyjpceb Tool changer: Turret head Tool positions: 8 MACHINE DETAILS Compressed air supply: 7 bar Compressed air consumption: approx. 100 l/min (with spray device) Electrical connection: 400 V, 3 ~, 50 Hz EQUIPMENT Turret tool changer with 8 tool positions

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Ibjdpfx Apszwmy Neceb Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Ibodpfjyvr H Ijx Apcjb Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 2202 - 11141, Deckel FP 2 M with 3-axis digital Heidenhain ND 780 control Original condition, not repainted Stepless feed rate + rapid traverse Spindle speeds: 25 - 2500 Travel distances: X 400 Y 220 Z Drilling spindle, horizontal + vertical, SK 40 Central lubrication, manual Weight: approx. 1400 kg Electrically monitored chip guard, 2 x emergency stop for compliance with CE standards Machine vice, collet set, 6 tool holders SK 40, machine feet, lighting. Ijdpfx Aoz Ayzkopcsbb Condition very good, smooth operation at all spindle speeds and flawless guides. Can of course be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Ibjdpfxjxvaw Ss Apcsb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: G0E 1075, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, controller model: Mitsubishi 64S, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 460 mm Ibsdpfx Aezx Ahxjpcjb Spindle speed: 12,000 rpm Tool holder: BT40 Table size: 700 x 410 mm Maximum table load: 250 kg Number of tool magazine slots: 24 MACHINE DETAILS CNC control: Mitsubishi 64S Coolant pressure: 20 bar Dimensions & Weight Machine dimensions (L x W x H): 1,880 x 3,550 x 2,790 mm Machine weight: 4,300 kg Operating hours: The seller estimates the operating hours to be approximately 20,000 hours. EQUIPMENT Spindle cooling Chip conveyor Extraction system Electronic handwheel Renishaw measuring probe Ethernet interface Approx. 100 tool holders including cabinet

Condition: good (used), Year of construction: 1992, machine/vehicle number: 530640, Offer 26203 Technical data: - Drilling capacity - in steel: 16 mm - Drilling capacity - in aluminum: 20 mm - Drill spindle connection: MK 2 Ibsdpfx Asz Dgbdopceb - Drilling depth: 100 mm - Spindle/column overhang: 215 mm - 6 drill spindle speeds, stage 1: 200 - 1600 rpm - 6 drill spindle speeds, stage 2: 400 - 3200 rpm - Drive: 400 V / 0.7 kW - Drilling table with T-slot: B 250 x D 320 mm - Max. distance drill chuck / table: approx. 220 mm - Space required: approx. W 300 x H 1050 x D 450 mm - Weight: approx. 100 kg - Quick-change drill chuck: 1 - 13 mm - Coolant system - Original machine base cabinet

Condition: used, Year of construction: 1970, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition: Used, geometrically overhauled in 2026 Year of manufacture: approx. 1970 Isdez A Tn Iepfx Apcebb The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was carried out. The machine geometry was checked and adjusted. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Feed: 16 stages, 10 to 500 mm/min Drive power: Two-stage motor, approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping area: 600 x 210 mm Max. table load: approx. 150 kg Space requirement (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight approx.: 750 kg Inquiry item: Shipping costs in a customized offer.

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Isdpfx Ajxqihiopcebb Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. Ibjdpfx Aez A Azqepcsb The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Ibjdpjzk N Hrjfx Apcob Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Isdpfxjz An Ufo Apcjbb Technical data: - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm - W travel (boring spindle / quill): 600 mm - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Available for inspection in our workshop and ready for immediate delivery.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, Isdpfxsv Sv Enj Apcebb End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Year of construction: 1984, condition: used, Copy milling machine Rotox Ibsdpfxeillyls Apceb Type KF 257

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. Ibedpfx Ajzr Nkgepcob • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: used, Holz Her Sprint 1327 / PPC 231 Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm) 15" touchscreen control Power-PC color display Motorized, position-controlled bridge height adjustment Infeed guide rail with extended roller conveyor for precise workpiece feeding Ijdpfjz Az H Rex Apcsbb Pre-milling unit for edge preparation before the gluing station Fully automatic edge magazine for roll and strip material – SYNCHRO Gluing unit GLU-JET cartridge granule + PU adhesive, thin-film technology High-gloss package Glue height adjustment / sensor nozzle Printing unit MOT Cutting unit for roll and strip material with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit - Multifunction, 4 NC servo axes for edge trimming, radius, and chamfer milling 0.4 - 8 mm (15 mm) Scraping unit for chamfers and radii MOT, 2 NC axes pneumatic infeed and outfeed Copy milling unit for rounding corners and long edges, also for postforming, working height 60 mm Surface scraping unit - finish, pneumatic Buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spraying equipment Infeed area, electrically controlled release agent spray device Printing unit, antistatic spray device Outfeed area, electrically controlled cleaning agent spray device Complete tool set From leasing return / year of manufacture 2015 Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team. Iedpez A D H Usfx Apcebb

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 1,250 mm Travel range, Y-axis: 540 mm Travel range, Z-axis: 520 mm Table length: 1,800 mm Table width: 400 mm Tool holder: BT50 Main spindle power: 7.5 kW Spindle speed: 275–2,000 rpm MACHINE DETAILS Control: CNC Control system: Heidenhain Number of axes: 3 Ibjdpfx Aezxdxlepceb Connected power: 12 kW Dimensions & Weight Dimensions (L × W × H): 2,100 × 2,100 × 2,200 mm Net weight: 3,600 kg Number of transport packages: 2 EQUIPMENT Tools Documentation CE marking

Condition: used, Year of construction: 1996, 1996 Balestrini PICO Sliding Automatic Tenoning Machine with 1-head and 2-bench Isdpez Df I Njfx Apcebb

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, Ibjdpfoz Dgudox Apcsb HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, Year of construction: 1995, Second-hand machine Year of manufacture: 1995 Features and technical specifications: Versatile copy router with extremely short set-up times, both when switching from manual work steps for automated operations, as well as when switching between a wide variety of automated machining processes The automatic stencil feed (consisting of a central copying roller and a pressure roller) was manufactured by SCM Designed to automatically feed workpieces secured to a jig past the milling tool The automatic copy roller and pressure roller can be removed in a matter of seconds. This means that the machine Available for one-off and custom-made items produced by hand Distance between tool axis and column: 915 mm Spindle stroke 105 mm Table stroke 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed 10,000/20,000 rpm Table dimensions with extensions 1510 x 1170 mm Motor power 4 kW Motor power for template feed: 0.14 kW Stencil feed speed 1.5–12 m/min Number of adjustable turret depth stops: 6 Ijdpfjzk N Nyex Apcebb Dimensions approx. 1690 x 1100 x 1890 mm Weight 650 kg Availability: at short notice Location: 63934 Röllbach

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Iodpfewtnxnox Apcjbb Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 S ALUMİNYUM FREZE MAKİNESİ, • Used for machining lock handle positions, hinge and espagnolettes slots, and custom-sized channels on aluminium and plastic profiles • Copying fixture suitable for the required operation • Independent channel milling feature via guide stop, in addition to copying fixture • Powerful 1.1 kWh / 1.5 HP motor Iedpfx Aeydu Hrspcsbb • 13,500 rpm milling motor speed • 220 / 230 VOLT, 50/60 HERTZ • 5 mm milling cutter supplied as standard OPTIONS • Base cabinet system • Pneumatic system

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,100 mm, spindle diameter: 100 mm, table length: 1,100 mm, table width: 1,000 mm, TOS Varnsdorf WH 10 NC table type horizontal boring mill (borer), year of construction 1987. Ibjdpfx Aoz Apa Njpcsb The machine has been converted to an HSP control and its electrical/electronic system has been overhauled. Well maintained and in working condition. Technical data: - Table size: 1,100 x 1,000 mm - X travel: 1,200 mm - Y travel: 1,100 mm - Spindle diameter: 100 mm - Control: HSP (retrofit), electrics overhauled Available for inspection in our workshop and ready for immediate delivery.