Used Copy Attachment for sale (5,343)

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete Njdjzbiq Tjpfx Ahkeda -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

Year of construction: 1989, condition: excellent (used), Hydraulic copy lathe for wood Automatic cycle turning system with one programmable copier for one or two passes Hydraulic copying unit with touch probe Maximum distance between centers mm 1300 Maximum diameter mm 250 Tailstock sleeve diameter mm 60 Nodpfx Ahom Tz Tuskjda Stroke of the tailstock sleeve mm 100 Carriage feed speed mt/min 0/6 Trolley return speed mt/min 7.33 Spindle speed rpm 900/1500/1800/2250/3000/4500

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Njdpjyb S Hkefx Ahkoda

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, milling length: 750 mm, milling spindle length: 750 mm, spindle stroke: 150 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Working length: 750 mm Maximum milling height: 150 mm Spindle diameter: 50 mm Spindle motor power: 15 kW Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Ndodpfx Ahexzimteksa Machine dimensions: 1450 x 1600 x 1800h mm

Condition: used, x-280 ,y- 200 , Z 315 , Tischabmessungen 380x380/250x500 Ndsdpfjddxb Nex Ahkja Sehr viele Schriftsaetze,wesentlich mehr als abgebildet

Year of construction: 2001, condition: good (used), Seith 1042.80.15, BJ 2001 Ndedsfgvv Tepfx Ahksa Forklift attachment Push device Push fork Push-off FEM2B mount approx. 41 cm for forklifts up to 2.5 tons Please refer to the nameplate for details Used condition, little used

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device Nedpezcz Dnofx Ahkoda 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Max. workpiece width: 180 mm Ndodpey Tnitjfx Ahkja MACHINE DETAILS Main motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: excellent (used), 113 sets, pallet collars type 65, Cordes, ideal for stacking goods on Euro pallets - second-hand : Price per piece blue pallet collars (net): only 45.-€ Price per piece in galvanized quality (net): only 55.-€ Nsdpfx Ahor Imatekoda Manufacturer: Cordes Type: Pallet extension type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Usable height; 800mm 800mm high 800mm wide Load capacity: 1.500kg Dead weight per set approx. 22kg 4 stacking plates for safe stacking collapsible New price: approx. 150.-€ Quantities available: 29 sets in galvanized and 84 sets in blue Condition: very good Available: immediately Location: 74080 Heilbronn

Condition: excellent (used), Milling machine, copy router in very good working condition. Ndedpfx Asx Rrtdshkea

Condition: ready for operation (used), Year of construction: 2008, The Balestrini CP 100 (manufactured in versions such as CP 100/6 or CP 100/8) is an industrial, multi-spindle wood profiling and copying machine. It is used for precise shaping and copying of curved components. It is typically used in the production of chairs, bent furniture, and door and window frame elements. Technical specifications: Construction: The machine is equipped with several working units (heads) that operate simultaneously based on copying templates. Drives: Main motors with power usually exceeding 2.9 kW (up to 10 HP depending on the configuration), often powered by 380-400V. Working equipment: It features tables with adjustable angles in two planes and a pneumatic clamping system that ensures the stability of the workpiece. Parameters: The machine allows for milling components with a length often exceeding 2000 mm in larger versions. The weight ranges around 900 kg. Ndedpfjzbc Rtsx Ahkja

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Nodpfx Asza Iifjhkjda Metering spray device

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm Nsdpfx Ahoib D H Rskjda - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: used, functionality: fully functional, machine/vehicle number: VCEL120HE00018344, Year of construction: 2021, operating hours: 6,010 h, load capacity: 12,500 kg, lifting height: 4,100 mm, fuel type: diesel, construction height: 3,390 mm, power: 203 kW (276.00 HP), motor manufacturer: Volvo, gearing type: automatic, battery capacity: 340 Ah, battery voltage: 24 V, ground clearance: 460 mm, turning radius (outer): 12,710 mm, tire condition: 70 %, front tire type: pneumatic tires (air-filled), front tire size: 23.5 R25, rear tire type: pneumatic tires (air-filled), rear tire size: 23.5 R25, empty load weight: 21,600 kg, total height: 3,390 mm, total length: 6,580 mm, total width: 2,670 mm, color: yellow, Equipment: air conditioning, cabin, centralized greasing system, We are offering this used Volvo L120H wheel loader, manufactured in 2021. Manufacturer: Volvo Ndsdpfxey Ukkve Ahkoa Model: L120H Year of manufacture: 2021 Condition: used Type: Wheel loader Included: An extra set of Michelin tires, a Holms rotary broom, a loading bucket with a new cutting edge, and a pressure relief system. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Working length: 90 cm. Engine: 2.2 kW. Njdpsy Tm Nljfx Ahkjda

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Ndedjtqytispfx Ahkoa Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Condition: good (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders Ndjdpfx Ahjtt Abxjkoa - cooling and lubrication installation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Njdpfey S Aa Dsx Ahkjda Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Condition: excellent (used), Year of construction: 2005, The JAROMA DT-3 copy-turning and milling machine is a professional, cast iron woodworking machine with a copy device, designed for serial production of round, polygonal, and helical components. It uses turning knives or milling cutters (disc/finger) for profile machining based on a template, ensuring high shape repeatability.Main features and specifications:Application: Serial production of parts such as chair legs, balusters, and handles.Construction: Stable cast iron bed.Motor power: 2.2 kW.Dimensions: approx. 225 x 80 x 140 cm.Weight: approx. 300 kg. Ndsdpfx Ahsy Sg Dtjkja

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Ndsdpfxeyxgzxs Ahkja The machine is ready for operation

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Ndjdpfx Aoxz Sknjhkja Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Year of construction: 1984, condition: used, Copy milling machine Rotox Type KF 257 Ndjdpfjillylsx Ahkea

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: Nsdpoy Nm Erjfx Ahksda - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: used, used, good conditionmake Stegherrtype BVspeeds infinitely variable 3 - 18 m/rage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as viewed,without guarantee and warranty Ndjdpfx Ahsvwfn Askoa

Condition: good (used), Pantograph Milling / Engraving Machine Stock number: 3098 Manufacturer: Scripta Machine number: Njdpfjy H Hhbjx Ahkoda Type / Model: SR 300 Travel range x-y-z: mm Pattern table / working table: 600 x 400 // 600 x 250 mm Speed range: 700 to 18,000 rpm, stepless Transmission: 1 : 1.33 to 1 : 10 Accessories/equipment: Font sets; others (see pictures) Power requirement: kW Condition: good Weight: 0.7 t