Used Convection Dryers for sale (1,802)

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm Rodoxn Nlvopfx Ahvep - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 Rodpfxevupdce Ahvsp - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, for installation on an existing bar conveyor. Rsdpfxjumvqcs Ahvep Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm Redpfx Aeumvkcohvsp - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) Rodpou Abn Tjfx Ahvop - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees Rsdpfx Ahjxfkbajvjp - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, TESOMA DryTech Industrial Drying Tunnel – 7.5 m – 900 mm – Working Condition, Tested The TESOMA DryTech industrial drying tunnel is designed for textile screen printing lines. Technical specifications: Total length: 7.5 m Belt width: 900 mm Year of manufacture: approx. 2008 Electric heating Industrial, heavy-duty, stable construction Technical condition: Conveyor belt runs smoothly Heaters operational Fans in working order Control panel active (indicator lights working) Machine tested after purchase – fully functional Machine is complete, ready for transport and installation. A video of the machine in operation can be provided upon request. Location: Poland Rjdpfeympziex Ahvep Terms of sale: EXW Poland International transport can be arranged. Price: €19,900 (negotiable)

Condition: good (used), machine/vehicle number: 1770, Year of construction: 1999, Brand: Werner Koch Technik GmbH Model: CKT 110 Year of construction: 1999 Rjdpfxsu Aqg Se Ahvsp Dry air quantity: 110 m³ /h Volume bin: 400 L

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 The dryer is fully operational. Rjdeymmbtopfx Ahvep

Condition: not inspected (used), Year of construction: 2005, Without battery Rsdpfxjhzrbns Ahvep Manufacturer: Fimap

Condition: good (used), Year of construction: 2027, We are selling a Thermolift 100-2. Further information can be provided upon request. Rodpfx Asyl Uabohvep

Year of construction: 2015, condition: reconditioned (used), Rational scc 202e We. Unit after full renovation ready to work. Include trolley. Rsdpfeylw D Nox Ahvep

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System Redpfjd R Sb Iox Ahvjp one-sided drying of various media on plane parts parts can be heated by the built-in IR emitter

Year of construction: 2028, condition: like new (used), Steam convection oven, Rational SCC 202 electric combi oven in excellent condition, fully serviced. * Fits 20 GN 2/1 trays or 40 GN 1/1 * Steam cooking mode from 30°C to 130°C * Regeneration function * Convection / dry heat: temperature range from 30°C to 300°C, 0–100% maximum humidity * Probe and shower included * Automatic cleaning with tablets, and more... Rodpfsylqdcex Ahvop

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Redpfx Ajyif I Ujhvop Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: new, New electric scrubber-dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture: 2024 – unused, from stock Theoretical area coverage: 2000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 rpm Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing ability: 2% Battery voltage: 24 Volts, 100 AH - Battery charger 24 V - Battery 24 V, 100 AH - One cleaning brush Redpfsvvww Tsx Ahvep - Two separate tanks - No traction drive, the machine is manually pushed Machine length: 1200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg Brand new – in original packaging – unused, from stock

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Rsdpfx Ahexr N U Ejvep Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: ready for operation (used), Eloma Backermaster EB 30 XL T convection oven. Redpoyldakjfx Ahvsp Ready to use. Located Locally in Hungary (EU), Vácegres.

Condition: refurbished (used), Dry air industrial dryer R70 for plastics on mobile frame with 3 x Alav, Colour: yellow Dry air flow rate: 70m³/h Heating capacity dry air: 6kW Heating capacity regeneration: 6kW Connected wattage: 6.6kW Total connected capacity: 16kW Rjdoyk Uqwepfx Ahvsp with 2x additional heating 3kW Additional information: 2 x 100l GFK hoppers with front door opening and sight glass with lids for conveyance connection and 3 x suction boxes completely overhauled with 1 year guarantee - excepting wear parts

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Rsdpfomt Dcxjx Ahvjp Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: good (used), Stock number: 3078 Manufacturer: Labotec Model: DDM 120-3 Year of manufacture: 1995 Machine number: 9SP5 5701642 Con-Evator PGT: 9ST6 1405 610 Operating hours: Container capacity: 120 l Temperature range: up to 180 °C Condition: good Rsdpfjyk Hf Tex Ahvep Dryer: 9 kW Blower: 1.5 kW Weight: 215 kg Dimensions: 1,200 x 800 x 1,700 mm

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Rjdpfx Asyk Eg Nehvop Dryer VITS gas dryer Folder Capable of folding up to A5 size Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Rsdpfx Ahjmt Dcqjvop Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: like new (used), Binder M 115 laboratory dryer – ex demo model from 2024 We offer a Binder M 115 laboratory dryer in ex demo condition, manufactured in 2024. The device was used only for demonstration purposes – it is fully functional, tested by the manufacturer and practically like new. The M 115 model is a precise laboratory dryer with forced air circulation, designed for fast and even drying and heat treatment of samples. Thanks to the possibility of programming work cycles, the device works well both in standard applications and in processes requiring repeatability and control of thermal conditions. Key parameters: • Year of manufacture: 2024 • Technical condition: ex demo – like new • Chamber capacity: 115 liters • Temperature range: from +10°C above ambient temperature to +300°C • Air circulation: forced (with fan) – fast and even temperature distribution • Controller with programming: possibility of setting cycles in real time or interval • Temperature protection: class 2 according to DIN 12880 • USB / Ethernet interface (depending on the version) for data logging Dimensions: • Interior (W × H × D): approx. 550 × 480 × 400 mm • External dimensions: approx. 710 × 790 × 605 mm • Power supply: 230 V, 50/60 Hz The device is ready for immediate use. Rjdpfx Ahowp Hm Njvep Upon request, we will send photos, a test video and a price offer.

Condition: like new (used), Year of construction: 2025, Binder M 400 from 2025, ex-display chamber oven in as-new condition Model M 115 | Drying and temperature chambers with forced convection and advanced programming capabilities Advantages: - Uniform temperature control thanks to the preheating chamber e™ - Identical test conditions throughout the entire usable volume, regardless of sample size and quantity - Excellent thermal insulation lowers operating costs - Advanced programming options Redpjxftb Nsfx Ahvjp PRODUCT DESCRIPTION With a maximum temperature of +300 °C and versatile programming features, the M series material testing chambers are perfectly suited for material testing as well as ageing tests. High airflow, provided by a powerful fan, enables rapid heating. KEY FEATURES Temperature range: +23°C above ambient temperature up to +300°C High temperature accuracy with e™ technology and increased heating power Reinforced fan with adjustable rotational speed Electromechanical exhaust air flap control Intuitive touchscreen controller with segmental time programming and real-time programming 2 chrome-plated wire shelves Independent, adjustable class 2 (DIN 12880) temperature safety device and independent class 3.1 (DIN 12880) temperature safety device with selectable visual/acoustic alarm on the controller Failsafe function – backup PT100 sensor Computer interface: Ethernet Internal data logger, measured values in open format readable via USB